McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    18 Products

    Chamfering Router Bits

    Image of ProductInUse. Chamfering Cut Style. Front orientation. Router Bits. Chamfering Router Bits.

    Chamfering Cut Style

    These bits make chamfer, bevel, and other angled cuts in wood.
    Uncoated Carbide-Tipped High-Speed Steel
    Image of Product. Front orientation. Router Bits. Chamfering Router Bits, Uncoated Carbide-Tipped High-Speed Steel, Chamfering Cut Style, Straight Flutes, Ball Bearing.

    Chamfering

    Cut Style,

    Straight

    Flutes, Ball

    Bearing

    Use carbide-tipped high-speed steel bits on wood. They're sturdier than carbide bits and can be used for hand routing. A ball-bearing pilot helps position the bit for straight cuts.
    Cutting
    Dia.
    Lg. of
    Cut
    Cut
    Angle
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    Ball Bearing
    Pilot Dia.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    Chamfering Cut Style
     
    Straight Flutes
    1"1/2"45°1/4"2"Ball Bearing1/2"2Hand Router, Router TableWood, Particleboard, Plywood00000000000000
    1"5/8"45°1/2"2 1/2"Ball Bearing1/2"2Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     

    Router Bit Sets

    Image of ProductInUse. Chamfering Cut Style. Front orientation. Chamfering Cut Style. Router Bit Sets.
    Image of ProductInUse. Corner Cut Style. Front orientation. Corner-Rounding Cut Style. Router Bit Sets.
    Image of ProductInUse. Square Cut Style. Front orientation. Square Cut Style. Router Bit Sets.
    Image of ProductInUse. Flush-Trimming Cut Style. Front orientation. Flush-Trimming Cut Style. Router Bit Sets.

    Chamfering Cut Style

    Corner Cut Style

    Square Cut Style

    Flush-Trimming Cut

    Style

    Image of ProductInUse. Groove Cut Style. Front orientation. Groove Cut Style. Router Bit Sets.
    Image of ProductInUse. Hinge Mortise Cut Style. Front orientation. Hinge-Mortise Cut Style. Router Bit Sets.
    Image of ProductInUse. Joining Cut Style. Front orientation. Joining Cut Style. Router Bit Sets.
    Image of ProductInUse. Panel Pilot Cut Style. Front orientation. Panel-Pilot Cut Style. Router Bit Sets.

    Groove Cut Style

    Hinge Mortise Cut Style

    Joining Cut Style

    Panel Pilot Cut Style

    Image of Product. Front orientation. Router Bits. Router Bit Sets.
    Keep a variety of router bits on hand to cut grooves, chamfers, and other detailed shapes into wood and plastic. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.
    Flush-Trimming Cut Style—Flush-trimming bits cut layers of material flush to one another or make cuts along a template.
    Hinge-Mortise Cut Style—Hinge-mortise bits create large, shallow recesses.
    Joining Cut Style—Joining bits create shapes that fit together in order to form joints.
    Panel-Pilot Cut Style—Panel-pilot bits have a pointed tip that creates starter holes for efficient plunge cutting in wood. To make precise cutouts, use the top of the tip as a pilot and guide the bit along a template placed below the workpiece.
    No. of
    Pieces
    Cut Style
    Includes
    Shank
    Dia.
    For Tool Type
    For Use On
    Each
    Uncoated Carbide-Tipped High-Speed Steel
     
    Multipurpose
    15Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Joining    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters
    One Cove Router Bit: 3/8" Cutting Diameter
    Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters
    One V-Groove Router Bit: 5/8" Cutting Diameter
    One Dovetail Router Bit: 9/16" Cutting Diameter
    One Roman Ogee Router Bit: 5/32" Cutting Diameter
    One Slotting Router Bit: 1-1/4" Cutting Diameter
    One Tongue-and-Groove Router Bit: 1-1/4" Cutting Diameter
    Three Square Router Bits: 1/4", 1/2", and 5/8" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite000000000000000
    30Chamfering
    Corner Rounding
    Square
    Flush Trimming
    Groove
    Hinge Mortise
    Joining
    Panel Pilot    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    One Beaded-Corner Router Bit: 1-1/16" Cutting Diameter
    One Wavy-Corner Router Bit: 1-1/4" Cutting Diameter
    Five Rounded-Corner Router Bits: 1/8", 1/4", 5/16", 3/8", and 1/2" Cutting Diameters
    Two Cove Router Bits: 7/8" and 1-1/8" Cutting Diameters
    One Dovetail Router Bit: 9/16" Cutting Diameter
    One Hinge-Mortise Router Bit: 1/2" Cutting Diameter
    One Panel-Pilot Router Bit: 5/16" Cutting Diameter
    Three Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters
    Two Rabbet Router Bits: 1-1/4" Cutting Diameter
    Two Rounded-Groove Router Bits: 1/2" and 3/4" Cutting Diameters
    Two V-Groove Router Bits: 5/8" Cutting Diameter
    Seven Square Router Bits: 5/32", 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite00000000000000
     
    Trimming, Edging
    6Chamfering
    Corner Rounding
    Flush Trimming    		Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters
    Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters
    Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters    		1/4"Hand Router, Router TableSoftwood, Hardwood, Plastic, Laminate, Composite0000000000000
     

    Corner-Rounding Router Bits

    Choose from bits that form a variety of shapes along the edges of your workpiece.
    Uncoated Carbide-Tipped Steel
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Rounded Corner Style.
    Image of ProductInUse. Front orientation. Router Bits. Corner-Rounding Router Bits , Uncoated Carbide-Tipped Steel, Rounded with Beading Corner Style.

    Rounded Corner Style

    Rounded with Beading

    Corner Style

    Carbide-tipped steel bits are for use on wood.
    Ball Bearing—Bits with a ball-bearing pilot operate smoothly thanks to the pilot, which decreases friction and guides the bit for accurate cuts. Other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.
    Cutting
    Dia.
    Cut
    Radius
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    Ball Bearing
    Pilot Dia.
    No. of
    Flutes
    Bead
    Radius
    For Tool Type
    For Use On
    Each
    Rounded Corner Style
     
    Straight Flutes
    1"1/4"7/16"1/4"1 29/32"Ball Bearing1/2"2—Hand Router, Router TableWood, Particleboard, Plywood00000000000000
     
    Rounded with Beading Corner Style
     
    Straight Flutes
    1"1/4"7/16"1/4"1 29/32"Ball Bearing3/8"23/16"Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     

    Router Bits for Grooves

    Carve grooves in wood and laminate. These bits have straight flutes that quickly remove material, leaving a rough finish. Made of carbide-tipped high-speed steel, they provide a longer tool life and faster cutting speeds than standard high-speed steel bits.
    Uncoated Carbide-Tipped High-Speed Steel
    Image of ProductInUse. Front orientation. Router Bits. Router Bits for Grooves , Uncoated Carbide-Tipped High-Speed Steel, V-Shaped Grooves.
    Image of ProductInUse. Front orientation. Router Bits. Router Bits for Grooves , Uncoated Carbide-Tipped High-Speed Steel, Rounded Grooves.

    V-Shaped Grooves

    Rounded Grooves

    Image of Product. Front orientation. Router Bits. Router Bits for Grooves , Uncoated Carbide-Tipped High-Speed Steel, V-Shaped Grooves.

    V-Shaped Grooves

    Image of Product. Front orientation. Router Bits. Router Bits for Grooves , Uncoated Carbide-Tipped High-Speed Steel, Rounded Grooves.

    Rounded Grooves

    Cutting
    Dia.
    Lg. of
    Cut
    Cut
    Angle
    Shank
    Dia.
    Overall
    Lg.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    V-Shaped Grooves
     
    Straight Flutes
    1"3/4"90°1/2"2 1/4"2Hand Router, Router Table, CNC MachineWood, Particleboard, Plywood, Laminate0000000000000
    1"7/8"60°1/2"3 1/2"2Hand Router, Router Table, CNC MachineWood, Particleboard, Plywood, Laminate000000000000
     
    Rounded Grooves
     
    Straight Flutes
    1"1 1/4"—1/2"2 3/4"2Hand Router, Router Table, CNC MachineWood, Particleboard, Plywood, Laminate000000000000
     

    Straight and Spiral Router Bits for Wood, Particle Board, and Plywood

    Image of ProductInUse. Square Cut Style. Front orientation. Router Bits. Straight and Spiral Router Bits for Wood, Particle Board, and Plywood.

    Square Cut Style

    Create square slots, pockets, and edges in wood. These router bits are plunge cutting, letting you cut directly into the workpiece from above. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.
    Uncoated High-Speed Steel
    Image of Product. Front orientation. Router Bits. Straight and Spiral Router Bits for Wood, Particle Board, and Plywood, Uncoated High-Speed Steel, Square Cut Style—Plunge-Cut, Straight Flutes.

    Square Cut

    Style—Plunge-Cut,

    Straight Flutes

    Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish. They’re made from high-speed steel.
    Cutting
    Dia.
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    Square Cut Style—Plunge-Cut
     
    Straight Flutes
    1"1 1/4"1/2"2 3/4"2Hand Router, Router Table, CNC MachineWood, Particleboard, Plywood0000000000000
     

    Trimming Router Bits

    Cut layers of material flush to one another or make cuts along a template.
    Uncoated Carbide-Tipped High-Speed Steel
    Image of ProductInUse. Front orientation. Router Bits. Trimming Router Bits , Uncoated Carbide-Tipped High-Speed Steel, Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut.
    Image of Product. Top Pilot. Front orientation. Top Pilot. Trimming Router Bits , Uncoated Carbide-Tipped High-Speed Steel.

    Flush-Trimming Cut

    Style (Top

    Pilot)—Plunge-Cut

    Top Pilot

    Carbide-tipped high-speed steel bits are for use on wood and laminate.
    Top Pilot—Top-pilot bits cut a lower layer of the workpiece flush to the layer above. In addition to flush trimming, they can be used for pattern cutting with a template placed above the workpiece.
    Plunge Cut—Bits with a plunge cut type let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.
    Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.
    Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.
    Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.
    Cutting
    Dia.
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    Router Bit
    Pilot Type
    Ball Bearing
    Pilot Dia.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut
     
    Straight Flutes
    1"1"3/8"2 7/8"Ball Bearing1"2Hand Router, Router TableWood, Particleboard, Plywood, Laminate00000000000000
    1"1"1/2"2 3/4"Ball Bearing1"2Hand Router, Router TableWood, Particleboard, Plywood, Laminate0000000000000
    1"1 3/4"1/2"3 3/4"Ball Bearing1"2Hand Router, Router TableWood, Particleboard, Plywood, Laminate0000000000000
     

    Router Bits for Wood Joining

    Create shapes that fit together to form wood joints commonly used to build doors and frames.
    Dovetail Wood Joint—Uncoated Carbide-Tipped Steel
    Image of ProductInUse. Front orientation. Router Bits. Router Bits for Wood Joining, Dovetail Wood Joint—Uncoated Carbide-Tipped Steel.
    Image of Product. Front orientation. Router Bits. Router Bits for Wood Joining, Dovetail Wood Joint—Uncoated Carbide-Tipped Steel.
    Cutting
    Dia.
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    Joining Cut Style
     
    Straight Flutes
    1"1"1/2"2 3/4"2Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     
    Drawer-Lock Wood Joint—Uncoated Carbide-Tipped Steel
    Image of ProductInUse. Front orientation. Router Bits. Router Bits for Wood Joining, Drawer-Lock Wood Joint—Uncoated Carbide-Tipped Steel.
    Image of Product. Front orientation. Router Bits. Router Bits for Wood Joining, Drawer-Lock Wood Joint—Uncoated Carbide-Tipped Steel.
    Cutting
    Dia.
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    Joining Cut Style
     
    Straight Flutes
    1"1/2"1/2"1 5/16"2Hand Router, Router TableWood, Particleboard, Plywood0000000000000
     

    Hinge and Lock Mortise Router Bits

    Image of Product. Arbor. Front orientation. Hinge and Lock Mortise Router Bits .

    Arbor

    Use these bits to create large, shallow recesses in wood, such as mortises for hinge leaves or locks. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.
    Uncoated Carbide-Tipped High-Speed Steel
    Image of ProductInUse. Front orientation. Router Bits. Hinge and Lock Mortise Router Bits , Uncoated Carbide-Tipped High-Speed Steel, Lock-Mortise Cut Style.
    Image of Product. Front orientation. Router Bits. Hinge and Lock Mortise Router Bits , Uncoated Carbide-Tipped High-Speed Steel, Lock-Mortise Cut Style.

    Lock-Mortise Cut Style

    Lock-Mortise

    Cut Style

    Lock-Mortise Cut Style—Lock-mortise bits create deeper recesses for bulky lock hardware to ensure doors close flush. They require an arbor (sold separately) to connect them to your router.
    Router Bits
    Arbors
    Cutting
    Dia.
    Lg. of
    Cut
    Shank
    Dia.
    Overall
    Lg.
    No. of
    Flutes
    For Tool Type
    For Use On
    Each
    Each
    Lock-Mortise Cut Style
     
    Straight Flutes
    1"1/2"1/4"1"2Hand Router, Router Table, CNC MachineWood, Particleboard, Plywood0000000000000000000000000000
     
    back to top