Corner-Rounding Router Bits
Choose from bits that form a variety of shapes along the edges of your workpiece.
Carbide-tipped steel bits are for use on wood.
Bits with a ball-bearing pilot operate smoothly thanks to the pilot, which decreases friction and guides the bit for accurate cuts. Other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.
| Cutting Dia. | Cut Radius | Lg. of Cut | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | For Tool Type | For Use On | Each | |
Uncoated Carbide-Tipped Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cove Corner Style | |||||||||||
| 1 3/8" | 1/2" | 5/8" | 1/4" | 2 1/8" | Ball Bearing | 3/8" | 2 | Hand Router, Router Table | Wood, Particleboard, Plywood | 00000000 | 000000 |
Router Bits for Wood Joining
Create shapes that fit together to form wood joints commonly used to build doors and frames.
Rabbet and slotting bits have a ball-bearing pilot that guides the bit for accurate cuts and produces less friction than solid pilots for smoother operation. Rabbet bits with 1 3/8" cutting diameter include interchangeable bearings in a range of sizes to adjust the rabbet width.
| Cutting Dia. | Rabbet Wd. | Lg. of Cut | Shank Dia. | Overall Lg. | Pilot Type | Ball-Bearing Pilot Dia. | Number of Flutes | Flute Type | For Tool Type | For Use On | Each | |
Uncoated Carbide-Tipped High-Speed Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 3/8" | 1/8", 1/4", 5/16", 3/8", 7/16", 1/2" | 1/2" | 1/4" | 2" | Ball Bearing | 3/8", 1/2", 5/8", 3/4", 7/8", 1 1/8" | 2 | Straight | Hand Router, Router Table | Particleboard, Plywood, Wood | 0000000 | 000000 |
Router Bit Sets
Keep a variety of router bits on hand to cut grooves, chamfers, and other detailed shapes into wood and plastic. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.
Flush-trimming bits cut layers of material flush to one another or make cuts along a template.
Joining bits create shapes that fit together in order to form joints.
Hinge-mortise bits create large, shallow recesses.
Panel-pilot bits have a pointed tip that creates starter holes for efficient plunge cutting in wood. To make precise cutouts, use the top of the tip as a pilot and guide the bit along a template placed below the workpiece.
| No. of Pieces | Cut Style | Includes | Shank Dia. | For Tool Type | For Use On | Each | |
Uncoated Carbide-Tipped High-Speed Steel | |||||||
|---|---|---|---|---|---|---|---|
Multipurpose | |||||||
| 15 | Chamfer Corner Rounding Flush Trimming Groove Joining Square | Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters One Cove Router Bit: 3/8" Cutting Diameter Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters One V-Groove Router Bit: 5/8" Cutting Diameter One Dovetail Router Bit: 9/16" Cutting Diameter One Roman Ogee Router Bit: 5/32" Cutting Diameter One Slotting Router Bit: 1-1/4" Cutting Diameter One Tongue-and-Groove Router Bit: 1-1/4" Cutting Diameter Three Square Router Bits: 1/4", 1/2", and 5/8" Cutting Diameters | 1/4" | Hand Router, Router Table | Soft Wood, Hard Wood, Composites, Plastics, Plastic Laminate | 00000000 | 0000000 |
| 30 | Chamfer Corner Rounding Flush Trimming Groove Hinge Mortise Joining Panel Pilot Square | Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters One Beaded-Corner Router Bit: 1-1/16" Cutting Diameter One Wavy-Corner Router Bit: 1-1/4" Cutting Diameter Five Rounded-Corner Router Bits: 1/8", 1/4", 5/16", 3/8", and 1/2" Cutting Diameters Two Cove Router Bits: 7/8" and 1-1/8" Cutting Diameters Three Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters Two Rounded-Groove Router Bits: 1/2" and 3/4" Cutting Diameters Two V-Groove Router Bits: 5/8" Cutting Diameter One Hinge-Mortise Router Bit: 1/2" Cutting Diameter One Dovetail Router Bit: 9/16" Cutting Diameter Two Rabbet Router Bits: 1-1/4" Cutting Diameter One Panel-Pilot Router Bit: 5/16" Cutting Diameter Seven Square Router Bits: 5/32", 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4" Cutting Diameters | 1/4" | Hand Router, Router Table | Soft Wood, Hard Wood, Composites, Plastics, Plastic Laminate | 00000000 | 000000 |
Trimming and Edging | |||||||
| 6 | Chamfer Corner Rounding Flush Trimming | Two Chamfer Router Bits: 1" and 1-3/8" Cutting Diameters Two Rounded-Corner Bits: 1/8" and 1/4" Cutting Diameters Two Flush-Trimming Router Bits: 1/2" and 5/8" Cutting Diameters | 1/4" | Hand Router, Router Table | Soft Wood, Hard Wood, Composites, Plastics, Plastic Laminate | 00000000 | 00000 |