Create straight and chamfer cuts on countertops or other plastic laminate material without changing bits. For flush trimming, hold the bit at a height where only the straight cutting edge contacts the workpiece. For chamfer cuts, use the angled cutting edge. A ball-bearing pilot guides the bit for accurate cuts and produces low friction for smooth operation. The straight flutes quickly remove material and leave a rough finish. These bits cannot make plunge cuts, so they're best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.

Micrograin carbide bits provide superior wear resistance, long tool life, and a cleaner finish than bits made of other materials.

For technical drawings and 3-D models, click on a part number.

Choose from bits that form a variety of shapes along the edges of your workpiece.

Carbide-tipped steel bits are for use on wood.

Bits with a ball-bearing pilot operate smoothly thanks to the pilot, which decreases friction and guides the bit for accurate cuts. Other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

These bits make chamfer, bevel, and other angled cuts in wood.

Use carbide-tipped high-speed steel bits on wood. They're sturdier than carbide bits and can be used for hand routing. A ball-bearing pilot helps position the bit for straight cuts.

For technical drawings and 3-D models, click on a part number.

Create shapes that fit together to form wood joints commonly used to build doors and frames.

For technical drawings and 3-D models, click on a part number.

Use these bits to create large, shallow recesses in wood, such as mortises for hinge leaves or locks. Made of carbide-tipped high-speed steel, these bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits. They do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

Hinge-mortise bits create shallow recesses.

Lock-mortise bits create deeper recesses for bulky lock hardware to ensure doors close flush. They require an arbor (sold separately) to connect them to your router.

For technical drawings and 3-D models, click on a part number.

Cut V-shaped grooves into aluminum honeycomb panels, so you can fold the panels 90°. These bits are useful for bending panels to create partitions and storage cabinets. Also known as double-edge folding router bits.

For technical drawings and 3-D models, click on a part number.