McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    280 Products

    Weld-On Vibration-Damping Block Routing Clamps

    Image of Product. Front orientation. Contains Annotated. Routing Clamps. Weld-On Vibration-Damping Block Routing Clamps.
    Image of Product. Shown with Stacking Clamp (Sold Separately). Front orientation. Contains Annotated. Routing Clamps. Weld-On Vibration-Damping Block Routing Clamps.

    Shown with Stacking Clamp

    (Sold Separately)

    Weld the bottom plate of these clamps to your mounting surface for a more secure hold than screw-on clamps. Their tight fit around pipe and tubing reduces vibration and cuts down on noise. All keep pressurized lines stable in hydraulic systems to prevent leaks, ruptures, or disconnected fittings.
    Polypropylene—The body of these clamps stand up to water, most acids, alcohols, and salts. They’re commonly used to route tubing in food processing, lab, and outdoor installations.
    Aluminum—Best for extreme conditions, these clamps can handle temperatures up to 570°F. They won’t rust when exposed to salt water or mild chemicals, but they shouldn’t be used with stainless steel to avoid contact corrosion. Although stronger than plastic, they’re four to five times heavier and not suitable for weight-sensitive applications.
    Steel Top and Bottom Plate—Best for dry environments since moisture will cause these plates to rust.
    Zinc-Plated Steel Top Plate and Zinc-Phosphate-Coated Steel Bottom Plate—With a layer of zinc to protect against corrosion, these plates are a good choice for areas with occasional exposure to moisture. The layer on the bottom plates is thinner than the top plates, making it easier to remove before welding.
    304 Stainless Steel Top and Bottom Plate—These plates are suitable for a wide range of corrosive environments. They won't rust in wet areas and hold up against mild chemicals and solvents.
    Screw-On Mounts—Use the screw holes to attach these clamps to surfaces that can't be welded. They’re also a good option when a less permanent hold is needed for future adjustments.
    Stacking Clamps—Route multiple lines of similar size on top of each other. These clamps include a plate and fasteners for mounting to standard clamps or other stacking clamps. Keep in mind they can't be used on their own.
    Routing Clamps
    Screw-On Mounts
    Stacking Clamps
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    Lg.
    Wd.
    Ht.
    Max. Pressure,
    psi
    Each
    Each
    Each
    Polypropylene
     
    Steel Top and Bottom Plate
    1/4"62 7/8"1 1/4"2 1/16"5,0003249T10100000———0———0
    3/8"102 7/8"1 1/4"2 1/16"5,0003249T1020000———0———0
    1/2"131/8
    2 7/8"1 1/4"2 1/16"5,0003249T1030000———0———0
    9/16"141/4
    2 7/8"1 1/4"2 1/16"5,0003249T1150000———0———0
    5/8"161/4
    2 7/8"1 1/4"2 1/16"5,0003249T10400000———0———0
    11/16"173/8
    2 7/8"1 1/4"2 1/16"5,0003249T11600000———0———0
    3/4"193/8
    3 3/8"1 1/4"2 9/16"5,0003249T10500000———0———0
    13/16"211/2
    3 3/8"1 1/4"2 9/16"5,0003249T11700000———0———0
    7/8"221/2
    3 3/8"1 1/4"2 9/16"5,0003249T10600000———0———0
    1"253 3/8"1 1/4"2 9/16"5,0003249T10700000———0———0
    1 1/16"273/4
    3 3/8"1 1/4"2 9/16"5,0003249T11800000———0———0
    1 1/4"324"1 1/4"3 1/16"5,0003249T10800000———0———0
    1 5/16"331
    4"1 1/4"3 1/16"5,0003249T11900000———0———0
    1 1/2"384"1 1/4"3 1/16"5,0003249T10900000———0———0
    1 11/16"431 1/4
    5 7/8"1 3/4"4 1/4"5,0003249T12100000———0———0
    1 3/4"441 1/4
    5 7/8"1 3/4"4 1/4"5,0003249T11100000———0———0
    1 7/8"481 1/2
    5 7/8"1 3/4"4 1/4"5,0003249T12200000———0———0
    2"511 1/2
    5 7/8"1 3/4"4 1/4"5,0003249T11200000———0———0
    2 1/4"575 7/8"1 3/4"4 1/4"5,0003249T31100000———0———0
    2 3/8"602
    5 7/8"1 3/4"4 1/4"5,0003249T12300000———0———0
    2 1/2"642
    5 7/8"1 3/4"4 1/4"5,0003249T11300000———0———0
    2 3/4"705 7/8"1 3/4"4 1/4"5,0003249T11400000———0———0
    2 7/8"732 1/2
    7 3/8"2 1/4"5 1/2"5,0003249T25200000———0———0
    3"762 1/2
    7 3/8"2 1/4"5 1/2"5,0003249T24900000———0———0
    3 1/2"893
    7 3/8"2 1/4"5 1/2"5,0003249T25300000———0———0
    4"1023 1/2
    10"3"7 5/8"5,0003249T251000000———0———0
    4 1/2"1144
    10"3"7 5/8"5,0003249T254000000———0———0
     
    Zinc-Plated Steel Top Plate and Zinc-Phosphate-Coated Steel Bottom Plate
    1/4"61 1/2"1 3/16"1 5/16"2,0003015T2100003015T181000003015T24100000
    3/8"101 1/2"1 3/16"1 5/16"2,0003015T2200003015T18100003015T2410000
    1/2"131/8
    1 11/16"1 3/16"1 9/16"2,0003015T2300003015T18200003015T2420000
    9/16"141/4
    1 11/16"1 3/16"1 9/16"2,0003015T3300003015T18200003015T2420000
    5/8"161/4
    1 11/16"1 3/16"1 9/16"2,0003015T2400003015T18200003015T2420000
    11/16"173/8
    1 11/16"1 3/16"1 9/16"2,0003015T3400003015T18200003015T2420000
    3/4"193/8
    2"1 3/16"1 11/16"2,0003015T2500003015T18300003015T2430000
    13/16"211/2
    2"1 3/16"1 11/16"2,0003015T3500003015T18300003015T2430000
    7/8"221/2
    2"1 3/16"1 11/16"2,0003015T2600003015T18300003015T2430000
    1"252"1 3/16"1 11/16"2,0003015T2700003015T18300003015T2430000
    1 1/16"273/4
    2 3/8"1 3/16"1 15/16"2,0003015T3600003015T18400003015T2220000
    1 1/4"322 13/16"1 3/16"2 9/16"2,0003015T2800003015T18500003015T24400000
    1 5/16"331
    2 13/16"1 3/16"2 9/16"2,0003015T3700003015T18500003015T24400000
    1 1/2"382 13/16"1 3/16"2 9/16"2,0003015T2900003015T18500003015T24400000
    1 11/16"431 1/4
    2 13/16"1 3/16"2 9/16"2,0003015T3800003015T18500003015T24400000
    1 3/4"441 1/4
    3 7/16"1 3/16"2 7/8"2,0003015T3100003015T18600003015T24500000
    1 7/8"481 1/2
    3 7/16"1 3/16"2 7/8"2,0003015T3900003015T18600003015T24500000
    2"511 1/2
    3 7/16"1 3/16"2 7/8"2,0003015T3200003015T18600003015T24500000
    2 1/4"574 13/16"1 3/16"4 1/16"2,0003015T311000003015T187000003015T24600000
    2 3/8"602
    4 13/16"1 3/16"4 1/16"2,0003015T315000003015T187000003015T24600000
    2 1/2"642
    4 13/16"1 3/16"4 1/16"2,0003015T312000003015T187000003015T24600000
    2 3/4"704 13/16"1 3/16"4 1/16"2,0003015T319000003015T187000003015T24600000
    2 7/8"732 1/2
    4 13/16"1 3/16"4 1/16"2,0003015T316000003015T187000003015T24600000
    3"762 1/2
    4 13/16"1 3/16"4 1/16"2,0003015T313000003015T187000003015T24600000
    3 1/2"893
    5 13/16"1 3/16"5 1/16"2,0003015T317000003015T188000003015T24700000
    4"1023 1/2
    5 13/16"1 3/16"5 1/16"2,0003015T314000003015T188000003015T24700000
    4 1/2"1144
    5 3/4"1 1/4"5 1/16"2,0003015T33800000———0———0
     
    304 Stainless Steel Top and Bottom Plate
    1/4"61 1/2"1 3/16"1 5/16"2,0003015T41000003015T18900000———0
    1/4"62 7/8"1 1/4"2 1/16"5,0003249T22100000———0———0
    3/8"101 1/2"1 3/16"1 5/16"2,0003015T42000003015T18900000———0
    3/8"102 7/8"1 1/4"2 1/16"5,0003249T22200000———0———0
    1/2"131/8
    1 11/16"1 3/16"1 9/16"2,0003015T43000003015T19200000———0
    1/2"131/8
    2 7/8"1 1/4"2 1/16"5,0003249T22300000———0———0
    9/16"141/4
    1 11/16"1 3/16"1 9/16"2,0003015T53000003015T19200000———0
    9/16"141/4
    2 7/8"1 1/4"2 1/16"5,0003249T23700000———0———0
    5/8"161/4
    1 11/16"1 3/16"1 9/16"2,0003015T44000003015T19200000———0
    5/8"161/4
    2 7/8"1 1/4"2 1/16"5,0003249T22400000———0———0
    11/16"173/8
    1 11/16"1 3/16"1 9/16"2,0003015T54000003015T19200000———0
    11/16"173/8
    2 7/8"1 1/4"2 1/16"5,0003249T23800000———0———0
    3/4"193/8
    2"1 3/16"1 11/16"2,0003015T45000003015T19300000———0
    3/4"193/8
    3 3/8"1 1/4"2 9/16"5,0003249T22500000———0———0
    13/16"211/2
    2"1 3/16"1 11/16"2,0003015T55000003015T19300000———0
    13/16"211/2
    3 3/8"1 1/4"2 9/16"5,0003249T23900000———0———0
    7/8"221/2
    2"1 3/16"1 11/16"2,0003015T46000003015T19300000———0
    7/8"221/2
    3 3/8"1 1/4"2 9/16"5,0003249T22600000———0———0
    1"252"1 3/16"1 11/16"2,0003015T47000003015T19300000———0
    1"253 3/8"1 1/4"2 9/16"5,0003249T22700000———0———0
    1 1/16"273/4
    2 3/8"1 3/16"1 15/16"2,0003015T56000003015T19400000———0
    1 1/16"273/4
    3 3/8"1 1/4"2 9/16"5,0003249T24100000———0———0
    1 1/4"322 13/16"1 3/16"2 9/16"2,0003015T48000003015T19500000———0
    1 1/4"324"1 1/4"3 1/16"5,0003249T22800000———0———0
    1 5/16"331
    2 13/16"1 3/16"2 9/16"2,0003015T57000003015T19500000———0
    1 5/16"331
    4"1 1/4"3 1/16"5,0003249T24200000———0———0
    1 1/2"382 13/16"1 3/16"2 9/16"2,0003015T49000003015T19500000———0
    1 1/2"384"1 1/4"3 1/16"5,0003249T22900000———0———0
    1 11/16"431 1/4
    2 13/16"1 3/16"2 9/16"2,0003015T58000003015T19500000———0
    1 11/16"431 1/4
    5 7/8"1 3/4"4 1/4"5,0003249T24300000———0———0
    1 3/4"441 1/4
    3 7/16"1 3/16"2 7/8"2,0003015T51000003015T19600000———0
    1 3/4"441 1/4
    5 7/8"1 3/4"4 1/4"5,0003249T23100000———0———0
    1 7/8"481 1/2
    3 7/16"1 3/16"2 7/8"2,0003015T59000003015T19600000———0
    1 7/8"481 1/2
    5 7/8"1 3/4"4 1/4"5,0003249T24400000———0———0
    2"511 1/2
    3 7/16"1 3/16"2 7/8"2,0003015T52000003015T19600000———0
    2"511 1/2
    5 7/8"1 3/4"4 1/4"5,0003249T23200000———0———0
    2 1/4"574 13/16"1 3/16"4 1/16"2,0003015T121000003015T19700000———0
    2 1/4"575 7/8"1 3/4"4 1/4"5,0003249T32100000———0———0
    2 3/8"602
    4 13/16"1 3/16"4 1/16"2,0003015T125000003015T19700000———0
    2 3/8"602
    5 7/8"1 3/4"4 1/4"5,0003249T24500000———0———0
    2 1/2"642
    4 13/16"1 3/16"4 1/16"2,0003015T122000003015T19700000———0
    2 1/2"642
    5 7/8"1 3/4"4 1/4"5,0003249T23300000———0———0
    2 3/4"704 13/16"1 3/16"4 1/16"2,0003015T329000003015T19700000———0
    2 3/4"705 7/8"1 3/4"4 1/4"5,0003249T23400000———0———0
    2 7/8"732 1/2
    4 13/16"1 3/16"4 1/16"2,0003015T126000003015T19700000———0
    2 7/8"732 1/2
    7 3/8"2 1/4"5 1/2"5,0003249T246000000———0———0
    3"762 1/2
    4 13/16"1 3/16"4 1/16"2,0003015T123000003015T19700000———0
    3"762 1/2
    7 3/8"2 1/4"5 1/2"5,0003249T235000000———0———0
    3 1/2"893
    5 13/16"1 3/16"5 1/16"2,0003015T127000003015T19800000———0
    3 1/2"893
    7 3/8"2 1/4"5 1/2"5,0003249T247000000———0———0
    4"1023 1/2
    5 13/16"1 3/16"5 1/16"2,0003015T124000003015T19800000———0
    4"1023 1/2
    10"3"7 5/8"5,0003249T236000000———0———0
    4 1/2"1144
    5 3/4"1 1/4"5 1/16"2,0003015T32800000———0———0
     
    Aluminum
     
    Steel Top and Bottom Plate
    4"1023 1/2
    8 15/16"3 3/16"7 13/16"10,0003050T69000000———0———0
    4 1/2"1144
    8 15/16"3 3/16"7 13/16"10,0003050T64000000———0———0
    5 9/16"1415
    10 5/8"3 9/16"9 1/16"10,0003050T65000000———0———0
    6 5/8"1686
    10 5/8"3 9/16"9 1/16"10,0003050T66000000———0———0
    8 5/8"2198
    13 7/16"4 3/4"12 5/8"10,0003050T6700000000———0———0
     
    Zinc-Plated Steel Top Plate and Zinc-Phosphate-Coated Steel Bottom Plate
    3/8"102 15/16"1 3/16"1 7/8"10,0003050T7100000———0———0
    1/2"131/8
    2 15/16"1 3/16"1 7/8"10,0003050T7200000———0———0
    5/8"161/4
    2 15/16"1 3/16"1 7/8"10,0003050T7300000———0———0
    11/16"173/8
    2 15/16"1 3/16"1 7/8"10,0003050T8400000———0———0
    3/4"193/8
    3 7/16"1 3/16"2 9/16"10,0003050T7400000———0———0
    13/16"211/2
    3 7/16"1 3/16"2 9/16"10,0003050T8500000———0———0
    7/8"221/2
    3 7/16"1 3/16"2 9/16"10,0003050T7500000———0———0
    1"253 7/16"1 3/16"2 9/16"10,0003050T7600000———0———0
    1 1/16"273/4
    3 7/16"1 3/16"2 9/16"10,0003050T8600000———0———0
    1 1/4"324"1 3/16"3"10,0003050T7700000———0———0
    1 5/16"331
    4"1 3/16"3"10,0003050T8700000———0———0
    1 1/2"384"1 3/16"3"10,0003050T7800000———0———0
    1 11/16"431 1/4
    5 9/16"1 13/16"4 5/16"10,0003050T8800000———0———0
    1 3/4"441 1/4
    5 9/16"1 13/16"4 5/16"10,0003050T7900000———0———0
    1 7/8"481 1/2
    5 9/16"1 13/16"4 5/16"10,0003050T8900000———0———0
    2"511 1/2
    5 9/16"1 13/16"4 5/16"10,0003050T8100000———0———0
    2 3/8"602
    5 9/16"1 13/16"4 5/16"10,0003050T9100000———0———0
    2 1/2"642
    5 9/16"1 13/16"4 5/16"10,0003050T8200000———0———0
    2 3/4"705 9/16"1 13/16"4 5/16"10,0003050T8300000———0———0
    2 7/8"732 1/2
    7 1/8"2 3/8"5 9/16"10,0003050T62000000———0———0
    3"762 1/2
    7 1/8"2 3/8"5 9/16"10,0003050T68000000———0———0
    3 1/2"893
    7 1/8"2 3/8"5 9/16"10,0003050T63000000———0———0
     

    Rail-Mount Vibration-Damping Block Routing Clamps

    Image of System. Shown with Stacking Clamp (Sold Separately). Front orientation. Routing Clamps. Rail-Mount Vibration-Damping Block Routing Clamps.
    Image of ProductInUse. Front orientation. Routing Clamps. Rail-Mount Vibration-Damping Block Routing Clamps.
    Image of Product. Front orientation. Contains Annotated. Routing Clamps. Rail-Mount Vibration-Damping Block Routing Clamps.

    Shown with

    Stacking Clamp

    (Sold

    Separately)

    Mount to rails and make quick adjustments, all without reaching for tools. Secure these clamps using the included rail nuts, then reposition them as needed—no disassembly required. They’re often used in modular production lines to make fast, frequent line changes. All fit tightly around pressurized lines in hydraulic systems to reduce vibration and cut down on noise. They are not compatible with strut channel or strut-mount clamps.
    Polypropylene—The body of these clamps stand up to water, most acids, alcohols, and salts. They’re commonly used to route tubing in food processing, lab, and outdoor installations.
    Steel Top Plate—Best for dry environments since moisture will cause these plates to rust.
    Zinc-Plated Steel Top Plate—With a layer of zinc to protect against corrosion, these plates are a good choice for areas with occasional exposure to moisture.
    304 Stainless Steel Top Plate—These plates are suitable for a wide range of corrosive environments. They won't rust in wet areas and hold up against mild chemicals and solvents.
    316 Stainless Steel Top Plate—Our most corrosion-resistant stainless steel plates won't degrade when exposed to chlorides and industrial solvents.
    Stacking Clamps—Route multiple lines of similar size on top of each other. These clamps include a plate and fasteners for mounting to standard clamps or other stacking clamps. Keep in mind they can't be used on their own.
    Routing Clamps
    Stacking Clamps
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    Lg.
    Wd.
    Ht.
    Max. Pressure,
    psi
    For Rail
    Opening Wd.
    Mounting Hardware
    Included
    Each
    Each
    Polypropylene
     
    Steel Top Plate
    1/4"62 1/4"1 1/4"1 3/4"5,00015/32"Yes3249T6100000———0
    3/8"102 1/4"1 1/4"1 3/4"5,00015/32"Yes3249T620000———0
    1/2"131/8
    2 1/4"1 1/4"1 3/4"5,00015/32"Yes3249T630000———0
    9/16"141/4
    2 1/4"1 1/4"1 3/4"5,00015/32"Yes3249T750000———0
    5/8"161/4
    2 1/4"1 1/4"1 3/4"5,00015/32"Yes3249T640000———0
    11/16"173/8
    2 1/4"1 1/4"1 3/4"5,00015/32"Yes3249T760000———0
    3/4"193/8
    2 3/4"1 1/4"2 1/4"5,00015/32"Yes3249T650000———0
    13/16"211/2
    2 3/4"1 1/4"2 1/4"5,00015/32"Yes3249T770000———0
    7/8"221/2
    2 3/4"1 1/4"2 1/4"5,00015/32"Yes3249T660000———0
    1"252 3/4"1 1/4"2 1/4"5,00015/32"Yes3249T670000———0
    1 1/16"273/4
    2 3/4"1 1/4"2 1/4"5,00015/32"Yes3249T780000———0
    1 1/4"323 3/8"1 1/4"2 3/4"5,00015/32"Yes3249T6800000———0
    1 5/16"331
    3 3/8"1 1/4"2 3/4"5,00015/32"Yes3249T7900000———0
    1 1/2"383 3/8"1 1/4"2 3/4"5,00015/32"Yes3249T6900000———0
    1 11/16"431 1/4
    4 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T8100000———0
    1 3/4"441 1/4
    4 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T7100000———0
    1 7/8"481 1/2
    4 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T8200000———0
    2"511 1/2
    4 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T7200000———0
    2 1/4"574 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T31200000———0
    2 3/8"602
    4 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T8300000———0
    2 1/2"642
    4 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T7300000———0
    2 3/4"704 1/2"1 3/4"3 7/8"5,00015/32"Yes3249T7400000———0
    3"762 1/2
    6"2 1/4"5 1/8"5,00015/32"Yes3249T31300000———0
    3 1/2"893
    6"2 1/4"5 1/8"5,00015/32"Yes3249T31600000———0
     
    Zinc-Plated Steel Top Plate
    1/4"61 1/2"1 3/16"1 1/16"2,0007/16"Yes3015T100003015T24100000
    3/8"101 1/2"1 3/16"1 1/16"2,0007/16"Yes3015T200003015T2410000
    1/2"131/8
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T300003015T2420000
    9/16"141/4
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T1300003015T2420000
    5/8"161/4
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T400003015T2420000
    11/16"173/8
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T1400003015T2420000
    3/4"193/8
    2"1 3/16"1 7/16"2,0007/16"Yes3015T500003015T2430000
    13/16"211/2
    2"1 3/16"1 7/16"2,0007/16"Yes3015T1500003015T2430000
    7/8"221/2
    2"1 3/16"1 7/16"2,0007/16"Yes3015T600003015T2430000
    1"252"1 3/16"1 7/16"2,0007/16"Yes3015T700003015T2430000
    1 1/16"273/4
    2 3/8"1 3/16"1 11/16"2,0007/16"Yes3015T1600003015T2220000
    1 1/4"322 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T800003015T24400000
    1 5/16"331
    2 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T1700003015T24400000
    1 1/2"382 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T900003015T24400000
    1 11/16"431 1/4
    2 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T1800003015T24400000
    1 3/4"441 1/4
    3 7/16"1 3/16"2 5/8"2,0007/16"Yes3015T1100003015T24500000
    1 7/8"481 1/2
    3 7/16"1 3/16"2 5/8"2,0007/16"Yes3015T1900003015T24500000
    2"511 1/2
    3 7/16"1 3/16"2 5/8"2,0007/16"Yes3015T1200003015T24500000
    2 1/4"574 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T411000003015T24600000
    2 3/8"602
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T415000003015T24600000
    2 1/2"642
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T412000003015T24600000
    2 3/4"704 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T419000003015T24600000
    2 7/8"732 1/2
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T416000003015T24600000
    3"762 1/2
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T413000003015T24600000
    3 1/2"893
    5 13/16"1 3/16"4 11/16"2,0007/16"Yes3015T417000003015T24700000
    4"1023 1/2
    5 13/16"1 3/16"4 11/16"2,0007/16"Yes3015T414000003015T24700000
    4 1/2"1144
    5 3/4"1 1/4"4 7/8"2,0007/16"Yes3015T41800000———0
     
    304 Stainless Steel Top Plate
    1/4"61 1/2"1 3/16"1 1/16"2,0007/16"Yes3015T8100000———0
    3/8"101 1/2"1 3/16"1 1/16"2,0007/16"Yes3015T8200000———0
    1/2"131/8
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T83000003015T13800000
    9/16"141/4
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T9300000———0
    5/8"161/4
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T8400000———0
    11/16"173/8
    1 11/16"1 3/16"1 5/16"2,0007/16"Yes3015T9400000———0
    3/4"193/8
    2"1 3/16"1 7/16"2,0007/16"Yes3015T85000003015T13900000
    13/16"211/2
    2"1 3/16"1 7/16"2,0007/16"Yes3015T9500000———0
    7/8"221/2
    2"1 3/16"1 7/16"2,0007/16"Yes3015T8600000———0
    1"252"1 3/16"1 7/16"2,0007/16"Yes3015T87000003015T14900000
    1 1/16"273/4
    2 3/8"1 3/16"1 11/16"2,0007/16"Yes3015T9600000———0
    1 1/4"322 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T8800000———0
    1 5/16"331
    2 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T97000003015T15900000
    1 1/2"382 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T8900000———0
    1 11/16"431 1/4
    2 13/16"1 3/16"2 5/16"2,0007/16"Yes3015T9800000———0
    1 3/4"441 1/4
    3 7/16"1 3/16"2 5/8"2,0007/16"Yes3015T9100000———0
    1 7/8"481 1/2
    3 7/16"1 3/16"2 5/8"2,0007/16"Yes3015T19100000———0
    2"511 1/2
    3 7/16"1 3/16"2 5/8"2,0007/16"Yes3015T9200000———0
    2 1/4"574 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T13100000———0
    2 3/8"602
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T13500000———0
    2 1/2"642
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T13200000———0
    2 3/4"704 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T42900000———0
    2 7/8"732 1/2
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T13600000———0
    3"762 1/2
    4 13/16"1 3/16"3 11/16"2,0007/16"Yes3015T13300000———0
    3 1/2"893
    5 13/16"1 3/16"4 11/16"2,0007/16"Yes3015T13700000———0
    4"1023 1/2
    5 13/16"1 3/16"4 11/16"2,0007/16"Yes3015T13400000———0
    4 1/2"1144
    5 3/4"1 1/4"4 7/8"2,0007/16"Yes3015T42800000———0
     
    316 Stainless Steel Top Plate
    1/2"131/8
    2 1/4"1 1/4"1 3/4"5,00015/32"Yes3249T25700000———0
    3/4"193/8
    2 3/4"1 1/4"2 1/4"5,00015/32"Yes3249T18500000———0
    1"252 3/4"1 1/4"2 1/4"5,00015/32"Yes3249T18700000———0
    1 5/16"331
    3 3/8"1 1/4"2 3/4"5,00015/32"Yes3249T19900000———0
     
    Rails

    Stackable Vibration-Damping Clamp Pipe Hangers

    Image of ProductInUse. Shown Connected. Front orientation. Pipe Hangers. Stackable Vibration-Damping Clamp Pipe Hangers.

    Shown

    Connected

    Image of Product. Front orientation. Pipe Hangers. Stackable Vibration-Damping Clamp Pipe Hangers, End Clamps.

    End Clamps

    Image of Product. Front orientation. Pipe Hangers. Stackable Vibration-Damping Clamp Pipe Hangers, Stacking Clamps.

    Stacking

    Clamps

    Stack these pipe hangers to organize multiple lines of pipe, tubing, and conduit. The rubber tightly fits around lines to minimize disruptive noise and equipment damage. It also prevents debris build-up and corrosion from metal-to-metal contact.
    End Clamps—The top plate has a threaded hole for mounting with threaded rod. The bottom plate has fasteners for holding clamps together. You can attach a stacking clamp to the bottom of an end clamp.
    Stacking Clamps—Include stacking hardware and a plate for attaching to an end clamp or other stacking clamps. To mount, the stacked clamps must be connected to an end clamp.
    ID
    For Conduit
    Trade Size
    End Clamps
    Stacking Clamps
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Copper
    Tube Size
    EMT
    IMC
    Rigid
    Wt. Cap.,
    lb.
    For Thread
    Size
    Each
    Each
    Santoprene Rubber
    1/4"63503/8"-16
    3063T110000003063T19000000
    1/2"131/8
    3/8
    3503/8"-16
    3063T12000003063T2100000
    3/4"193/8
    5/8
    1/2
    3/8
    3503/8"-16
    3063T13000003063T2200000
    1"253/4
    3/4
    3503/8"-16
    3063T14000003063T2300000
    1"253/4
    3/4
    3503/8"-16
    3063T24000003063T3100000
    1 1/2"381 1/4
    1 1/4
    3503/8"-16
    3063T25000003063T3200000
    2"511 1/2
    1 1/2
    1 1/2
    3503/8"-16
    3063T26000003063T3300000
    2"511 1/2
    1 1/2
    1 1/2
    3503/8"-16
    3063T84000003063T9500000
    2 1/2"642
    2
    3503/8"-16
    3063T85000003063T9600000
    3"762 1/2
    2 1/2
    2 1/2
    3503/8"-16
    3063T86000003063T9700000
    3 1/2"893
    3
    3
    3
    3503/8"-16
    3063T87000003063T9800000
     
    back to top