Send temperature readings directly to programmable logic controllers (PLCs)—with a built-in 4-20mA transmitter, these RTDs don’t require a separate signal converter. They have an NPT male probe connection, so they’re ready to screw into thermowells and other fittings on pipe and tanks. Made of 316 or 316L stainless steel, they resist corroding from harsh cleaning chemicals. This stainless steel also protects the RTD sensor inside from impact. They are also often installed in bores to measure the temperature of molds and dies. CE marked, they meet European safety standards.

To protect against vibration and shock during temperature measurements, these RTD probes come with a thermowell. Made of stainless steel, it acts as a shield for added protection from corrosion in liquids and gases. The thermowell also lets you replace the probe sensor without stopping flow or draining your system. For accurate readings, a spring pushes the probe tip forward, keeping the tip in constant contact with the thermowell. Rated IP65 and NEMA 4, these probes seal out dust and water from washdowns. Remove the cap on the head to wire the probe’s terminal block to your application.

Send temperature readings to two separate devices—these probes have two RTD sensors inside. For example, one RTD might connect to a data logger while the other connects to a PLC that automates processes based on temperature. These probes have an NPT male threaded fitting, so they’re ready to install in thermowells and other fittings on pipe and tanks. For direct immersion in liquid and gas processes, such as water lines and low-pressure steam lines, the fitting is welded to the sheath to fully enclose the RTDs. The sheath protects the sensors from impact. You can also install these probes in a bore to measure the temperature of molds and dies.

Check the temperature of liquids in hygienic applications such as food or pharmaceutical lines and tanks. Certified by 3-A to meet sanitary design standards, the parts of these probes that will touch liquid are highly polished to minimize spots where bacteria could grow. They're made of stainless steel, so they won't corrode from harsh cleaners and sanitizers. The housing is IP69K rated, meaning it withstands high-pressure, high-temperature washdowns that are common in hygienic cleaning practices. They have a flange that will connect to sanitary quick clamp fittings (also known as tri-clamp fittings); they're easy to connect and remove from your line.

Program these probes with the touchscreen, and select one of three colors as a visual alert for events in your process such as irregular or fluctuating temperatures. The head swivels 345° and the face rotates all the way around, so you can mount the sensor at any angle and still see the display. To trigger actions in your process line, connect these probes to remote displays, programmable logic controllers (PLCs), and other control equipment with the M12 plug. These probes meet EN 60751, an industry standard for accuracy. They’re also CE marked, meaning they meet European Union safety standards.