McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    35 Products

    Adhesive-Back RTD Probes for Surfaces

    About the thickness of a dime, these RTD probes stick to surfaces in tight spaces to measure temperature.
    Wire-Lead Connection
    Image of Product. Front orientation. RTDs. Adhesive-Back RTD Probes for Surfaces.
    EN 60751 Class B—Probes that meet EN 60751 adhere to industry standards for accuracy.
    MIL-STD-108—Probes that meet MIL-STD-108 are submersible, so they can monitor the temperature of water in tanks or containers.
    Probe
    Cable
    Wire
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Lg.
    Wd.
    Thk.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Lead
    Lg.
    AWG
    No. of
    Wires
    Wire Color
    Specs. Met
    Mil. Spec.
    Each
    Platinum Probe
    100-4 to 3009/16"0.188"0.063"±0.12%1.3Not Rated3Silicone Rubber
    		1/2"28
    		3Red/WhiteEN 60751 Class BMIL-STD-1086568T510000000
    100-4 to 3501/4"0.25"0.063"±0.12%0.15Not Rated3PTFE
    		1/2"28
    		3Blue/YellowEN 60751 Class B—6568T53000000
    100-4 to 3505/8"0.188"0.063"±0.12%0.4Not Rated3PTFE
    		1/2"26
    		3Red/WhiteEN 60751 Class B—6568T49000000
    100-4 to 3505/8"0.188"0.063"±0.12%1Not Rated3PTFE
    		1/2"26
    		3Red/WhiteEN 60751 Class B—6568T43000000
    100-4 to 3505/8"0.313"0.063"±0.12%1.2Not Rated3PTFE
    		1/2"22
    		3Red/WhiteEN 60751 Class B—6568T47000000
    100-4 to 35013/16"0.375"0.063"±0.12%0.9Not Rated3PTFE
    		1/2"26
    		3Red/WhiteEN 60751 Class B—6568T46000000
    100-4 to 3501 1/4"1"0.063"±0.12%0.2Not Rated3Silicone Rubber
    		1/2"24
    		3Red/WhiteEN 60751 Class B—6568T55000000
    100-4 to 3501 15/16"0.75"0.063"±0.12%0.1Not Rated3PTFE
    		1/2"24
    		3Red/WhiteEN 60751 Class B—6568T54000000
    1,000-4 to 3009/16"0.188"0.063"±0.12%1.3Not Rated3Silicone Rubber
    		1/2"28
    		3Red/White—MIL-STD-1086568T52000000
    1,000-4 to 3505/8"0.188"0.063"±0.12%0.4Not Rated3PTFE
    		1/2"26
    		2Red/White——6568T19000000
    1,000-4 to 3505/8"0.188"0.063"±0.12%1Not Rated3PTFE
    		1/2"26
    		2Red/White——6568T13000000
    1,000-4 to 3505/8"0.313"0.063"±0.12%1.2Not Rated3PTFE
    		1/2"22
    		2Red/White——6568T17000000
    1,000-4 to 35013/16"0.375"0.063"±0.12%0.9Not Rated3PTFE
    		1/2"26
    		2Red/White——6568T16000000
     

    Bolt-On RTD Probes for Surfaces

    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style A.
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style B.
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style C.

    Style A

    Style B

    Style C

    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style D.
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style E.
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style F.

    Style D

    Style E

    Style F

    For reliable temperature readings in high-vibration environments, these RTD probes bolt onto the surface of motors and other equipment.
    M12 Plug Connection
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style A.

    Style A

    Style A—Style A and B probes are rated IP67 for protection from dust and temporary submersion.
    EN 60751 Class A—Probes that meet EN 60751 adhere to industry standards for accuracy.
    Probe
    Cable
    Style
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Bolt Hole
    Dia.
    Lg.
    Wd.
    Thk.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Specs. Met
    Each
    Stainless Steel Probe (IP67)
    A100-40 to 1901/2"2"0.438"0.313"±0.5%15Not Rated6Polyurethane Rubber
    		EN 60751 Class A6577T410000000
     
    Wire-Ferrule Connection
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style B.

    Style B

    Style B—Style A and B probes are rated IP67 for protection from dust and temporary submersion.
    EN 60751 Class A—Probes that meet EN 60751 adhere to industry standards for accuracy.
    Probe
    Cable
    Wire
    Style
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Bolt Hole
    Dia.
    Lg.
    Wd.
    Thk.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Lead
    Lg.
    AWG
    No. of
    Wires
    Wire Color
    Specs. Met
    Each
    Stainless Steel Probe (IP67)
    B100-40 to 1901/4"1 13/16"0.438"0.313"±0.5%39Not Rated6Polyurethane Rubber
    		1"22
    		4Brown/Blue/Black/WhiteEN 60751 Class A6577T47000000
     
    Wire-Lead Connection
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style C.
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style D.
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style E.
    Image of Product. Front orientation. RTDs. Bolt-On RTD Probes for Surfaces, Style F.

    Style C

    Style D

    Style E

    Style F

    EN 60751 Class B—Probes that meet EN 60751 adhere to industry standards for accuracy.
    MIL-STD-202 Method 204 Test Condition D—Probes that meet MIL-STD-202 Method 204 Test Condition D have been tested for use in vibration-heavy environments.
    Probe
    Cable
    Wire
    Style
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Bolt Hole
    Dia.
    Lg.
    Wd.
    Thk.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Lead
    Lg.
    AWG
    No. of
    Wires
    Wire
    Color
    Specs. Met
    Mil. Spec.
    Fasteners
    Included
    Each
    303 Stainless Steel Probe
    C100-55 to 5005/32"3/8"0.5"0.188"±0.12%10Not Rated3PTFE
    		1/2"26
    		3Red/WhiteEN 60751 Class BMIL-STD-202 Method 204 Test Condition DNo6577T370000000
    C1,000-55 to 5005/32"3/8"0.5"0.188"±0.12%10Not Rated3PTFE
    		1/2"24
    		2Red/White—MIL-STD-202 Method 204 Test Condition DNo6577T27000000
     
    316/316L Stainless Steel Probe
    D100-90 to 9305/32"1 1/4"0.313"0.188"±0.12%10Not Rated3Mica1/2"22
    		3Red/WhiteEN 60751 Class BMIL-STD-202 Method 204 Test Condition DNo6577T32000000
    D1,000-90 to 9305/32"1 1/4"0.313"0.188"±0.12%10Not Rated3Mica1/2"22
    		2Red/White—MIL-STD-202 Method 204 Test Condition DNo6577T22000000
     
    300 Series Stainless Steel Probe
    E100-90 to 9305/32"1"0.5"0.188"±0.12%10Not Rated3Mica1/2"22
    		3Red/WhiteEN 60751 Class BMIL-STD-202 Method 204 Test Condition DNo6577T31000000
    E1,000-90 to 9305/32"1"0.5"0.188"±0.12%10Not Rated3Mica1/2"22
    		2Red/White—MIL-STD-202 Method 204 Test Condition DNo6577T21000000
     
    Nickel-Plated Copper Probe
    F100-55 to 50017/64"1"0.5"0.188"±0.12%10Not Rated3PTFE
    		1/2"26
    		3Red/WhiteEN 60751 Class BMIL-STD-202 Method 204 Test Condition DNo6577T35000000
    F1,000-55 to 50017/64"1"0.5"0.188"±0.12%10Not Rated3PTFE
    		1/2"24
    		2Red/White—MIL-STD-202 Method 204 Test Condition DNo6577T25000000
     

    Signal-Averaging Adhesive-Back RTD Probes for Surfaces

    Image of ProductInUse. Style B Shown Mounted. Front orientation. RTDs. Signal-Averaging Adhesive-Back RTD Probes for Surfaces.

    Style B Shown

    Mounted

    Image of Product. Front orientation. RTDs. Signal-Averaging Adhesive-Back RTD Probes for Surfaces, Style A.

    Style A

    Image of Product. Front orientation. RTDs. Signal-Averaging Adhesive-Back RTD Probes for Surfaces, Style B.

    Style B

    Measure the temperature of cylinders, pipes, and flat surfaces without installing an immersion probe and where a point sensor may be inaccurate. These RTD probes take multiple temperatures along the length of the probe and average them together for accuracy. About the thickness of a dime, they stick to surfaces in tight spaces.
    Wire-Lead Connection
    Image of Product. Front orientation. RTDs. Signal-Averaging Adhesive-Back RTD Probes for Surfaces, Style A.
    Image of Product. Front orientation. RTDs. Signal-Averaging Adhesive-Back RTD Probes for Surfaces, Style B.

    Style A

    Style B

    Stainless Steel Cable—Probes with a stainless steel cable protect their wiring from wear and corrosion better than probes with a silicone rubber cable.
    EN 60751 Class B—Probes that meet EN 60751 adhere to industry standards for accuracy.
    Probe
    Cable
    Wire
    Style
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Lg.
    Wd.
    Thk.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Lead
    Lg.
    AWG
    No. of
    Wires
    Wire
    Color
    Specs. Met
    Features
    Each
    Platinum Probe
    A100-4 to 3501 1/4"0.5"0.063"±0.5%0.17Not Rated3Stainless Steel
    		1/2"26
    		3Red/White—Overtemperature Protection6568T560000000
    B100-4 to 3504"0.375"0.063"±0.12%0.6Not Rated3Silicone Rubber
    		1/2"26
    		3Red/WhiteEN 60751 Class B—6568T57000000
     

    Threaded RTD Probes for Surfaces

    Image of Product. Front orientation. RTDs. Threaded RTD Probes for Surfaces, Style A.
    Image of Product. Front orientation. RTDs. Threaded RTD Probes for Surfaces, Style B.
    Image of Product. Front orientation. RTDs. Threaded RTD Probes for Surfaces, Style C.

    Style A

    Style B

    Style C

    Thread these RTD probes into threaded holes in molds, dies, and other objects to measure their temperature.
    M12 Plug Connection
    Image of Product. Front orientation. RTDs. Threaded RTD Probes for Surfaces, Style A.

    Style A

    Style A—Style A and B probes are rated IP67 for protection from dust and temporary submersion.
    EN 60751 Class A—Probes that meet EN 60751 adhere to industry standards for accuracy.
    Probe
    Cable
    Style
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Thread
    Size
    Lg.
    Wd.
    Thk.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Specs. Met
    Each
    Stainless Steel Probe (IP67)
    A100-40 to 190M5 × 0.8 mm15/16"0.313"0.188"±0.5%8Not Rated6Polyurethane Rubber
    		EN 60751 Class A6577T450000000
    A100-40 to 190M6 × 1 mm15/16"0.313"0.188"±0.5%9Not Rated6Polyurethane Rubber
    		EN 60751 Class A6577T44000000
    A100-20 to 350M5 × 0.8 mm15/16"0.313"0.188"±0.5%8Not Rated6Silicone Rubber
    		EN 60751 Class A6577T42000000
    A100-20 to 350M6 × 1 mm15/16"0.313"0.188"±0.5%8Not Rated6Silicone Rubber
    		EN 60751 Class A6577T43000000
     
    Wire-Ferrule Connection
    Image of Product. Front orientation. RTDs. Threaded RTD Probes for Surfaces, Style B.

    Style B

    Style B—Style A and B probes are rated IP67 for protection from dust and temporary submersion.
    EN 60751 Class A—Probes that meet EN 60751 adhere to industry standards for accuracy.
    Probe
    Cable
    Wire
    Style
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Thread Size
    Lg.
    Wd.
    Thk.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Lead
    Lg.
    AWG
    No. of
    Wires
    Wire
    Color
    Specs. Met
    Each
    Stainless Steel Probe (IP67)
    B100-20 to 300M12 × 1.5 mm1 3/16"0.375"0.688"±0.5%12Not Rated16Silicone Rubber
    		1"22
    		4Red/WhiteEN 60751 Class A6577T460000000
     
    Wire-Lead Connection
    Image of Product. Front orientation. RTDs. Threaded RTD Probes for Surfaces, Style C.

    Style C

    EN 60751 Class B—Probes that meet EN 60751 adhere to industry standards for accuracy.
    MIL-STD-202 Method 204 Test Condition D—Probes that meet MIL-STD-202 Method 204 Test Condition D have been tested for use in vibration-heavy environments.
    Probe
    Cable
    Wire
    Style
    RTD Probe Resistance,
    ohm
    Temp. Range,
    ° F
    Thread
    Size
    Lg.
    Accuracy
    Response
    Time, sec.
    Max.
    Pressure
    Lg.,
    ft.
    Material
    Lead
    Lg.
    AWG
    No. of
    Wires
    Wire
    Color
    Specs. Met
    Mil. Spec.
    Each
    303 Stainless Steel Probe
    C100-55 to 5001/4"-20
    		3/8"±0.12%10Not Rated3PTFE
    		1/2"26
    		3Red/WhiteEN 60751 Class BMIL-STD-202 Method 204 Test Condition D6577T380000000
    C1,000-55 to 5001/4"-20
    		3/8"±0.12%10Not Rated3PTFE
    		1/2"24
    		2Red/White—MIL-STD-202 Method 204 Test Condition D6577T28000000
     

    Long-Life Data-Logging Thermometers

    Image of Product. Front orientation. Thermometers. Long-Life Data-Logging Thermometers.
    For more accurate and consistent readings than thermometers with thermocouple probes and a longer service life, these thermometers have a resistance temperature detector (RTD) probe. It logs up to 2,000 time- and date-stamped readings and uploads data to a PC through the USB port.
    Probe
    Temp. Range
    Resolution,
    ° C
    Accuracy
    No. of Probe
    Inputs
    Response
    Time, sec.
    Cable Lg.,
    ft.
    Lg.
    Dia.
    Certification
    Batteries
    Included
    Each
    For Use With Air, Gas, Liquids, Solids, and Surfaces
    -58° F to 932° F/-50° C to 500° C0.1/0.1±0.1° F/±0.1° C11054"3/16"CE Marked
    		Yes38655K18000000000
     
    Accessories and Replacements for Thermometers
    To conserve battery life, use the power adapter.
    Each
    316 Stainless Steel Replacement Probe38655K490000000
    Power Adapter (120V AC, 240V AC)38655K5200000
    back to top