Finish and polish metals without producing dust.

Evenly sand two surfaces at once.

These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.

Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

These discs have multiple layers of brick-shaped abrasive arranged in a pattern to create highly consistent finishes.

Fit these discs over your tool's arbor to sand masonry, ceramics, and composites.

Holes allow dust removal when used with a vacuum sander.

A special fastener on the back of these discs allows you to easily swap one disc for another.

A coating prevents dust and debris from building up on the abrasive surface.

The bits in these sets have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.

Bits attach to mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

Each set contains a selection of our most popular grinding bits.

Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.

The special shapes of these wheels provide more clearance than typical straight wheels.

The silicon carbide abrasive cuts quickly with light pressure.