Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Form bonds in 5 seconds or less.

In especially damp or humid environments, these adhesives keep their hold.

Form bonds without the strong odor of other instant-bond adhesives.

Bond plastics, porous materials, or dirty surfaces.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

These adhesives withstand temperatures up to 480° F.

These thin liquids, also known as super glue, flow into small gaps.

For flexible bonds that resist cracking, these adhesives stay pliable.

For easy positioning, these adhesives begin to harden only when exposed to light.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

For invisible bond lines, these adhesives dry clear.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Install building materials such as wood and drywall with these general purpose adhesives.

Install vinyl and rubber treads on stairs with this adhesive.

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

This general purpose glue tackles a variety of repairs.

Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.

Use these primers with structural epoxies, acrylics, and urethanes to promote bonding to EPDM rubber, polyolefin, and thermoplastic elastomers.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Use these two-part fillers to rebuild cracked or worn plastic surfaces.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These adhesives come in a can.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.