For quick repairs, these epoxies begin to harden in 6 minutes or less.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

For invisible bond lines, these adhesives dry clear.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Bond glass and stone to drywall, treated lumber, and subfloors.

Install vinyl and rubber treads on stairs with this adhesive.

Install foam insulation, drywall, and paneling with these adhesives.

Rubber cement allows repositioning until fully dried. Use it on paper and cardboard.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.