Stronger than natural rubber, these polyurethane rods combine the shock-absorbing qualities of rubber with the tear resistance of plastic. Use them to seal narrow spaces such as channels.

Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.

Commonly used for tires, conveyor belts, and chutes, SBR (styrene butadiene rubber) is harder and offers better abrasion resistance than natural rubber.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

With a thin metal backing, these sheets are good for use in bumpers, wear pads, machinery mounts, and other applications where some structural support is needed.

FDA compliant for use with food and beverage, these rods fit into channels and other narrow spaces for sealing and cushioning.

Stronger than standard high-temperature silicone rods, these rods are longer lasting and more shock absorbent.

Also known as polysiloxane, this silicone rubber offers good resistance to ozone and salt water.

Made of FDA-listed materials, these sheets and strips are for use with food.

Create a barrier against fire and smoke. These sheets and strips meet FAR 25.856 and UL 94 V-0 for flame retardance, so they emit extremely low levels of smoke when exposed to fire.

These 90° angles meet UL 94V0 for flame retardance.

With nearly twice the tensile strength of standard high-temperature silicone, these 90° angles absorb shock better and last longer.

The cylindrical shape fits into channels and other narrow spaces for sealing and cushioning.

Neoprene is also known as chloroprene. It offers good oil and abrasion resistance.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

An economical choice when performance isn’t critical. Neoprene is a good general purpose rubber that resists oil, water, and scrapes.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Use these small-diameter rods to seal narrow spaces.

Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.

Resistant to the chemicals that are commonly used to clean and sterilize food-processing equipment, these sheets and strips are made from FDA-listed materials for use with food and beverage.

Viton® fluoroelastomer stands up to tough chemicals, such as nitric acid, ethylene glycol, and isopropyl alcohol.

Seal and cushion narrow spaces, such as inside channels and seams.

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

An economical choice when performance isn't critical. Buna-N resists fuel oil, hydraulic oil, ethylene glycol, and grease.

Buna-N rubber resists fuel oil, hydraulic oil, ethylene glycol, and grease.

Also called hydrogenated nitrile or highly saturated nitrile, HNBR is Buna-N rubber that’s modified with hydrogen to boost its performance. These sheets can handle higher heat and more pressure than standard Buna-N sheets, and they’re less likely to warp or rip. They’re also more resistant to oil, fuel, and chemicals.

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

An economical choice when performance isn’t critical. They aren’t affected by sunlight, ozone, or water, so you can also use them in outdoor applications such as weatherstripping.

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.