These seals are made of solid EPDM foam rubber.

These solid EPDM rubber seals also resist salts.

The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.

These solid silicone rubber seals also stand up to water and salts.

Made of solid silicone foam rubber, these seals also resist water and salts.

These seals have a solid bulb.

Able to withstand temperatures up to 500° F, these all-rubber silicone seals resist water and salts.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.

Push these T-seals into grooves and channels to block out moisture, dust, and debris.

Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.

Hollow construction on these vinyl rubber seals provides better compressibility than seals with a foam core. They also resist salts and detergents.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

Hollow construction makes these seals more compressible than solid seals.

These hollow seals offer better compressibility than solid seals.

These Viton® fluoroelastomer O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol.

These hard O-rings offer better wear resistance than standard Viton® fluoroelastomer O-rings.

Also known as Boss O-rings, these hard O-rings are for use in tube fittings with a straight-thread connection.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection. They are brown for easy identification.

These durable O-rings bounce back to shape after repeated compression better than other types of Viton® fluoroelastomer O-rings.

These are the highest purity chemical-resistant O-rings we offer. They are made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room, plus they’re USP VI certified; not for use in medical applications.

In addition to resisting chemicals, such as benzene, butyl alcohol, and ethylene glycol, these Viton® fluoroelastomer ETP O-rings resist steam.

The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.

Flexible even at temperatures as low as -60° F, these fluorosilicone O-rings will keep your fittings free from leaks. They’re often used on fuel and coolant hose because fluorosilicone resists many chemicals, including ethanol and ethylene glycol.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.

Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors.

Inherently softer and more compressible than PTFE O-rings, these Kalrez 4079 O-rings have comparable chemical resistance.

Also known as Boss O-rings, these Kalrez 4079 O-rings are for use in tube fittings with a straight-thread connection. They’re inherently softer and more compressible than PTFE O-rings with comparable chemical resistance.

Made of Buna-N, these O-rings resist grease, hydraulic oil, and motor oil—plus mild chemicals and water.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These resist grease, hydraulic oils, and motor oil.

These hard O-rings offer better wear resistance than standard Buna-N O-rings.

These O-rings have eight points of contact for a better seal in dynamic applications than X-profile O-rings, plus they have eight grooves that hold lubricant to reduce friction and wear for a longer service life.

These Buna-N O-rings are made of FDA-listed material for use with food and beverage.

Choose these O-rings for their adherence to strict military standards for material and construction.

More abrasion resistant than Buna-N O-rings, these also resist mineral oil and motor oil.

These silicone O-rings withstand temperatures up to 400° F or 450° F.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These O-rings withstand temperatures up to 450° F.

Made and bagged in an ISO Class 7 (Fed. Std. Class 10,000) clean room, these are the highest purity high-temperature O-rings we offer.

When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.

These O-rings withstand higher temperatures than standard EPDM O-rings.

Made of FDA-listed material for use with food and beverage.

These O-rings also resist ammonia, ethylene glycol, and isopropyl alcohol.

This cord stock is softer and creates a better seal in low-pressure applications than standard Buna-N cord stock.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

Made of FDA-listed material for use with food and beverage, this cord stock resists animal and vegetable oils, citric acid, sodium bicarbonate, and grease.

This cord stock resists benzene, boric acid, ethylene glycol, and isopropyl alcohol.

The X shape of this cord stock provides four points of contact for a better seal in dynamic applications than round profile. It also requires less compression to make a seal, so it offers a longer service life.

More chemical resistant than standard Viton® fluoroelastomer, this cord stock is made of Grade ETP Viton® fluoroelastomer. It resists harsh chemicals, such as calcium hydroxide, methyl ethyl ketone (MEK), and nitric and phosphoric acids.

The brown color of this cord stock makes it easy to identify.

Use this cord stock to create O-rings for high-temperature applications up to 400° F.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

Use neoprene cord stock to make O-rings for applications that come into contact with water.

All of the O-rings in these assortments are made of Buna-N. They resist animal, vegetable, and motor oils.

These O-rings are harder than standard Buna-N O-rings for better resistance to wear.

Also known as Quattro Seals and X-rings, these X-profile O-rings have four points of contact for a better seal in dynamic applications than round-profile O-rings. They also require less compression to make a seal, so they offer a longer service life.

All of the O-rings in these assortments are Viton® fluoroelastomer and resist isopropyl alcohol, mineral oils, and transmission fluid.

These assortments include a mix of EPDM O-rings that resist water and steam and silicone O-rings that resist temperatures up to 450° F.

Able to withstand heat up to 450° F, these O-rings maintain a strong seal even when the temperature rises.

Also known as O-ring vulcanizing kits, these use a combination of heat and adhesive to create a bond that’s stronger with greater elasticity than a bond made of adhesive alone.

For use in high-pressure applications up to 3,000 psi.

This neoprene gasket material is reinforced with a nylon insert to prevent it from losing shape while under pressure up to 1,000 psi.

Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.

Also resistant to inert gases and abrasion, this material is made from blended aramid fiber/SBR rubber.

Also resistant to water and salts.

Made from a blend of aramid fiber and Buna-N rubber.

Commonly used in low-pressure applications, cork is blended with Buna-N rubber for a flexible, oil-resistant gasket material.

Made from a blend of carbon and Buna-N rubber, this material is unaffected by oil and temperatures up to 650° F.

This material resists boric acid, citric acid, isopropyl alcohol, fuel, and oil.

Fit these gaskets over connectors that plug in to your enclosure to absorb interference and prevent signal problems.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.

These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.

These compressible Buna-N rubber gaskets ensure a tight seal. They also resist water and salts.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.

Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.

Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.

Made from a blend of graphite and Buna-N rubber, these gaskets withstand temperatures up to 650° F.

Form a tight seal on cam-and-groove hose connections without fear of contaminating your food processing line. The metal additive in these gaskets can be picked up by a metal detector, so you can find and remove them if they fall into your line.

Made of FDA-listed material, use these gaskets in polypropylene cam-and-groove hose couplings for food and beverage.

Use these gaskets in twist-claw hose couplings, also known as universal hose and Chicago couplings.

The built-in screen is made of corrosion-resistant 316 stainless steel and provides inline straining.

These gaskets have a perforated plate to filter, separate, and strain liquids or dry materials in your line.

In addition to oil, these Buna-N gaskets resist water and salts.