Jackets, seals, and insulation are just a few of the many uses for rubber tubes.

The open top allows U-channels to slide over an edge. Use them as seals and trim.

Applications for these tubes include jackets, seals, and insulation.

These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.

The open top allows these foam U-channels to slide over and cushion an edge.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Keep grommets of various sizes on hand to solve whatever problems arise.

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

This trim withstands temperatures up to 450° F—more than twice as high as other foam trim. Designed to cushion during impact, it protects equipment and surfaces from damage.

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

Made of FDA listed materials, these rigid bellows are suitable for food and beverage applications.

Add cuff inserts to these flexible bellows for a custom fit.

Sewn seams let these bellows breathe, so they retract quickly in fast-cycling applications.

Interlock bellows, mounting flanges, and links to create a custom-length bellows. These molded bellows are airtight to keep contaminants out.

Attach the cuff end with a hose clamp, and screw mount the flange end.

Secure the cuff ends with hose clamps.

Similar to a window shade, pull these covers out to protect surfaces and equipment in tight spaces.

Install these bellows over gas springs to protect their piston rods.

Secure these bellows to punch presses to prolong the life of their die sets.

Shield ball joint rod ends to keep lubricants in and contaminants out.

Slide or zip these protectors around shocks and other moving parts to keep debris out of their seals.

Hose has a flexible plastic spiral that bounces back to its original shape when stepped on.

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

These short lengths of hose have a collar on each end to prevent the clamp from slipping off.

Hose has a plastic spiral that acts as a wear strip to protect against damage.

Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.

Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.

Hose meets UL 94 V-2 for flame retardance.

If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion.

These expansion joints have a double-bulb design for extra movement and vibration absorption.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

The ends of these removable supports snap in and compress between panels to reduce vibration of miniature cooling fans in compact electronics.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Often used as laboratory stoppers, these rubber plugs have good impact and abrasion resistance. They’re tapered to fit a range of hole diameters.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.

A specially formulated silicone rubber coating allows this sleeving to stretch over items during installation; it then tightens around its contents for a secure fit.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.

Made of silicone, these grips withstand temperatures up to 400° F.

Add or replace worn grips on round and irregularly shaped handles on hammers, axes, and other hand tools. These grips have a removable spiral-wound core. Slide them on a handle and use the tab to pull out the core. The grips contract and conform to your handle as the core is removed. Made of EPDM foam, they insulate and cushion vibration.

The adhesive backing keeps these grips in place. Made of EPDM foam, they are three times thicker than standard wrap-on grips to insulate and cushion vibration.