Neoprene is also known as chloroprene. It offers good oil and abrasion resistance.

Made from FDA-listed materials for use with food.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

Meeting transportation industry standards for flames, smoke, and toxicity, these neoprene sheets and strips are used as cushioning pads in panels to reduce vibration and noise.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

Made of FDA-listed materials, these sheets and strips are for use with food.

Create a barrier against fire and smoke. These sheets and strips meet FAR 25.856 and UL 94 V-0 for flame retardance.

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts.

With one layer of polyester fabric for every 1/16” of thickness, these sheets and strips maintain their size and shape under heavy compression better than the nonreinforced abrasion-resistant SBR.

Sunlight, ozone, and water won’t affect these sheets and strips.

A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

Buna-N rubber resists fuel oil, hydraulic oil, ethylene glycol, and grease.

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

Viton® fluoroelastomer stands up to tough chemicals, such as nitric acid, ethylene glycol, and isopropyl alcohol.

Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.

Even when temperatures rise to 445° F, these Kalrez sheets are resistant to virtually all classes of chemicals.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Silicone maintains its flexibility across a wide range of temperatures.

These sheets and strips will bounce back to shape, even after extended compression.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

Often used as padding in helmets, gloves, and boots, this super-strong EVA foam absorbs shock and resists tearing better than other types of foam.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Made of Buna-N foam, these sheets offer excellent oil resistance. They also resist fuel and solvents.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

This material suppresses static charges to prevent dust from building up.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

Prolonged outdoor exposure won’t discolor or degrade VHMW.

If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

Because this 6/12 material absorbs less water than standard nylon 6/6, it holds its shape better. It’s often machined into hose fittings and valve components.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Also known as pipe-grade HDPE, these sheets are about four times more impact resistant than standard HDPE and hold up outdoors, and in wet environments.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

This material prevents the buildup of static charges.

A layer of soft LDPE is sandwiched between two thin layers of aluminum for strength and rigidity.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

Add stiffness to composite sandwiches without adding a lot of weight.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.

Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.

Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.

These black polyester sheets protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into pump components and spacers.

Made with Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

Filled with glass, these Torlon 5030 bars are stronger and more rigid than Torlon 4301 and 4203, yet still electrically insulate like Torlon 4203.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Common in food and pharmaceutical plants, these PEEK sheets and bars help you identify contaminated batches.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

A static-dissipative coating on this cast acrylic prevents electrostatic discharge from damaging sensitive electronic equipment.

Modified for increased impact strength over other types of acrylic, this acrylic is often used for skylights and outdoor signs.

With a clear coating that provides protection from abrasion, UV light, and harsh cleaners, this polycarbonate is often used to create transit shelters and equipment shields.

Often used in security doors and windows to protect against forced entry, this laminated polycarbonate is nearly impenetrable.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

Resistant to scratches and scuffs, mirrored acrylic is an economical alternative to mirrored polycarbonate.

Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.

This neoprene gasket material is reinforced with a nylon insert to prevent it from losing shape while under pressure up to 1,000 psi.

For use in high-pressure applications up to 3,000 psi.

Also resistant to inert gases and abrasion, this material is made from blended aramid fiber/SBR rubber.

This paper-thin material is commonly used for light-duty gasketing.

Made of FDA-listed material for use with food and beverage.

Stronger and able to withstand higher pressures than other types of aramid/Buna-N.

In addition to withstanding temperatures up to 450° F, this silicone gasket material resists water and salts.

Made of American Bureau of Shipping Fire Safe approved graphite material, these sheets withstand temperatures up to 650° F and pressure up to 2,000 psi.