Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be removed with an alkaline cleaner.

These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.

Protect tools, dies, and other parts during shipping and storage with these durable, removable coatings. After peeling, they leave a greasy film for continued corrosion protection. Once removed, coatings can be melted again for repeat use.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

These polyurethane-based coatings resist moisture, corrosion, abrasion, and impact better than paint and have excellent color retention. They're often used as a topcoat over epoxy coatings.

These two-part epoxy coatings resist chemicals and other solvents.

More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Also known as antifouling paint, the copper additive in these coatings prevents organic material, such as algae, barnacles, and slime from attaching to the surface. Use on boats, submerged structures, and inside tanks.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Restore rusted metal surfaces to their original state. These removers dissolve rust and prevent it from returning.

Remove and prevent rust inside of pipes and equipment such as boilers and heat exchangers.

These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.

Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings.

Extend the life of your paint and coatings on damage-prone metal surfaces. When scratched or worn, these primers release small capsules of uncured primer to provide continued corrosion resistance.

Use these primers on your surface before antislip coatings to maximize longevity.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Prep, paint, and seal small scratches on metal surfaces with these pens.

Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.

Match the manufacturers’ color of your lift, jack, or motor to cover scratches and wear. This paint resists oil, gas, heat, and sunlight for use in demanding environments.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

Shield iron, steel, stainless steel and tin from corrosion.

This film has a corrosion inhibitor built-in to shield metal contents from corrosion.

Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

Waterproof and heat-resistant, this grease can be autoclaved without washing out of equipment. It's chemically inert, so it won't interact with process fluids.

For use in applications where acids, bases, oxidizers, and fuels are present.

Made with moisture-resistant thickeners, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads.

Made with moisture-resistant aluminum thickener, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads. It is NSF registered H1 for incidental food contact.

Made with moisture-resistant thickener, this grease resists washing off and reduces corrosion and oxidation in wet environments.

Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments.

These corrosion-resistant lubricants come with a traceable lot number and material report. The addition of nickel prevents dissimilar metals, such as brass and steel, from locking together.

Thick to cling to wet surfaces, these corrosion-resistant lubricants won’t wash off of chain or other moving metal parts in wet environments. They withstand heavy loads, cut through dirt, grease, and rust, and protect metal surfaces.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

Stop corrosion caused by battery acid fumes leaking at the posts of battery terminals.

Screw this dispenser to the top of most 8-oz. and 1-lb. brush-top antiseize lubricant cans. It has a trigger and a brush-tip nozzle that allow neat and easy one hand dispensing.