Safety Goggles with Green Lens

Filter by

Shade Number

Application

Arc-Flash Protection

Electrical Protection

Lens Color

Color

UV Protection Rating

Lens Material

Garment

Performance

Shape

Lens Properties

Lens Style

Lens Height

Material

Lens Width

Optical Density @ Wavelength

6 @ 190 nm to 400 nm

5 @ 850 nm to 2,700 nm

5 @ 870 nm to 1,200 nm

6 @ 1,000 nm to 1,100 nm

7 @ 1,000 nm to 2,500 nm

7 @ 1,020 nm to 1,100 nm

8 @ 1,200 nm to 2,450 nm

6 @ 9,000 nm to 11,000 nm

Specifications Met

Welding Lens Type

RoHS

Shade Type

Visible Light

DFARS Specialty Metals

Exempt

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Frame Color

Black

Export Control Classification Number (ECCN)

Lens Size

99 Products

Laser Welding Safety Glasses

Shield your eyes from harmful light during laser or traditional welding. These glasses meet ANSI Z136.1 specifications for laser safety. Since they can be worn for traditional welding as well as laser welding, you can switch between the two without needing to swap out your safety glasses. When laser welding, always wear them with a laser welding helmet or hood—they’re slim enough to fit underneath without a problem. Do not wear these glasses under a regular welding helmet when laser welding—they do not offer sufficient protection.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

Visible Light—Visible light is the percentage of visible light that passes through the lens. The lower the percentage, the more light is blocked. Make sure enough light passes through to see your welding work clearly but not so much that it becomes dangerous.

Optical Density @ Wavelength—Optical density indicates how much light a lens absorbs at a specific wavelength. The higher the density, the more UV, infrared, and visible light is blocked. Powerful lasers often require an optical density of 5 or higher.

					Frame
	Shade No.	Visible Light	Optical Density @ Wavelength	Lens Color	Material	Color	Arm Type	Temple-to-Temple Wd.	UV Protection Rating	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Length and -Tilt Arm

				3	14%	7 @ 10,600 nm	Green	Nylon	Black	Rigid	5 5/16"	Not Rated	Adjustable Arms	ANSI Z136.1, ANSI/ISEA Z87.1	9346N121	000000


				5	2.5%	7 @ 10,600 nm	Green	Nylon	Black	Rigid	5 5/16"	Not Rated	Adjustable Arms	ANSI Z136.1, ANSI/ISEA Z87.1	9346N122	00000

Wraparound Welding Safety Glasses


Style A	Style B	Style C

These glasses protect your eyes from harmful infrared light while welding.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

Padded Nosepiece and Padded Frame—Glasses with a padded frame or padded nosepiece provide added comfort.

			Lens		Frame
	Style	Shade No.	Properties	Color	Material	Color	Arm Type	Temple-to-Temple Wd.	UV Protection Rating	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Fixed Arm

				A	2	Scratch Resistant	Green	Nylon	Black	Flexible	5 3/8"	100.0%	Padded Nosepiece, Padded Arm Tips	ANSI/ISEA Z87.1	5803T103	000000


				A	3	Scratch Resistant	Green	Nylon	Black	Flexible	5 3/8"	100.0%	Padded Nosepiece, Padded Arm Tips	ANSI/ISEA Z87.1	5803T104	00000
				A	4	Scratch Resistant	Green	Nylon	Black	Flexible	5 3/8"	100.0%	Padded Nosepiece, Padded Arm Tips	ANSI/ISEA Z87.1	5803T105	00000
				A	5	Scratch Resistant	Green	Nylon	Black	Flexible	5 3/8"	100.0%	Padded Nosepiece, Padded Arm Tips	ANSI/ISEA Z87.1	5803T106	00000
				A	6	Scratch Resistant	Green	Nylon	Black	Flexible	5 3/8"	100.0%	Padded Nosepiece, Padded Arm Tips	ANSI/ISEA Z87.1	5803T107	00000
				A	8	Scratch Resistant	Green	Nylon	Black	Flexible	5 3/8"	100.0%	Padded Nosepiece, Padded Arm Tips	ANSI/ISEA Z87.1	5803T108	00000




						Adjustable-Length and -Tilt Arm

						B	3	Scratch Resistant	Green	Nylon	Black	Rigid	5 1/2"	—	Padded Frame	ANSI/ISEA Z87.1+, CAN/CSA Z94.3	5803T122	0000


						B	5	Scratch Resistant	Green	Nylon	Black	Rigid	5 1/2"	—	Padded Frame	ANSI/ISEA Z87.1+	5803T123	0000


						Oversized Polycarbonate Lens







										Adjustable-Length Arm

										C	3	Scratch Resistant	Green	Nylon	Black	Rigid	5 5/8"	—	Padded Nosepiece, Padded Arm Tips, Padded Frame	ANSI/ISEA Z87.1+, CAN/CSA Z94.3	5803T124	0000


										C	5	Scratch Resistant	Green	Nylon	Black	Rigid	5 5/8"	—	Padded Nosepiece, Padded Arm Tips, Padded Frame	ANSI/ISEA Z87.1+, CAN/CSA Z94.3	5803T125	0000

Welding Safety Goggles


Style A	Style B	Style C

Designed for continuous-use welding, these goggles protect your eyes from harmful infrared light.

Padded Frame—Goggles with a padded frame provide added comfort.

Splash Guard—Lenses with splash guard are indirectly ventilated to keep liquids out too.

			Lens
	Style	Shade No.	Color	Dia.	Ht.	Wd.	Features	Specs. Met		Each
Standard Polycarbonate Lens with Elastic Headband



		A	3	Green	2"	—	—	Adjustable Headband	ANSI/ISEA Z87.1	5444T9	000000


		Polycarbonate Lens with Elastic Headband



				B	5	Green	—	2"	4 1/4"	Adjustable Headband, Splash Guard	ANSI/ISEA Z87.1+	5444T107	00000


				Wraparound Polycarbonate Lens with Elastic Headband



						C	2	Green	—	1 1/2"	2 1/2"	Adjustable Headband, Padded Frame	ANSI/ISEA Z87.1	5444T101	00000


						C	3	Green	—	1 1/2"	2 1/2"	Adjustable Headband, Padded Frame	ANSI/ISEA Z87.1	5444T102	00000
						C	4	Green	—	1 1/2"	2 1/2"	Adjustable Headband, Padded Frame	ANSI/ISEA Z87.1	5444T103	00000
						C	5	Green	—	1 1/2"	2 1/2"	Adjustable Headband, Padded Frame	ANSI/ISEA Z87.1	5444T104	00000
						C	6	Green	—	1 1/2"	2 1/2"	Adjustable Headband, Padded Frame	ANSI/ISEA Z87.1	5444T105	00000
						C	7	Green	—	1 1/2"	2 1/2"	Adjustable Headband, Padded Frame	ANSI/ISEA Z87.1	5444T106	00000

Close-Fit Face Shields

Flip-Up Lens

The snug-fitting goggles attached to this face shield add protection from dust, liquids, and debris. They are designed to fit over most prescription glasses.

Flip-Up Lens—Shields with a flip-up lens are ideal for switching between tasks. Flip the shield down for full face protection, or flip it up when you only need to protect your eyes. You can also detach the shield when it’s not needed.

Shade Number—Those with a goggle shade number protect your eyes from infrared light, such as during light brazing and plasma cutting.

		Lens						Frame						Face Shield
	Shade No.	Properties	Material	Wd.	Thk.	Construction	Color	Material	Color	Headband Material	UV Protection Rating	Features	Specs. Met	Material	Wd.	Ht.	Color		Each
Flip-Up Lens



		3	Fog-Free, Ventilated	Polycarbonate	6 3/4"	0.06"	Solid	Green	Vinyl Plastic	Black	Plastic	99.9%	Flame-Retardant Adjustable Headband	ANSI/ISEA Z87.1+	Polycarbonate	7 3/8"	5"	Green	9219N112	000000


		5	Fog-Free, Ventilated	Polycarbonate	6 3/4"	0.06"	Solid	Green	Vinyl Plastic	Black	Plastic	99.9%	Flame-Retardant Adjustable Headband	ANSI/ISEA Z87.1+	Polycarbonate	7 3/8"	5"	Green	9219N113	00000

Eyeglass Side Shields

Semi-Rigid Polycarbonate

Add ANSI-rated side protection to the glasses you wear every day. Slide these shields onto the arms of your glasses to protect your eyes from impact.

Semi-Rigid Polycarbonate—Conform closely to your frames for a more secure fit than vinyl plastic shields. An angled wing tip increases surface coverage for enhanced side protection. These shields meet ANSI/ISEA Z87.1+ to withstand high-speed impact.

Green Lens—Tinted to block more light than clear shields and reduce glare in bright environments.

For Frame Height—Shields for glasses with a 1.2-1.7” frame height fit most eyewear. For larger glasses, such as aviators, choose shields designed for 1.6-2.1” frame heights.

						Pair
	Lens Color	For Frame Ht.	UV Protection Rating	Specs. Met		1-9	10-Up
Semi-Rigid Polycarbonate



		Green	1.2" to 1.7"	98.0%	ANSI/ISEA Z87.1+	2571T3	00000	00000


		Green	1.6" to 2.1"	98.0%	ANSI/ISEA Z87.1+	2571T5	0000	0000

Wraparound Laser-Protection Welding Safety Goggles

An adjustable strap keeps these goggles secure on your head better than safety glasses. Use them to guard your eyes from harmful light during laser welding and traditional welding. Since they can be worn for both traditional and laser welding, you can switch between the two without needing to swap out your safety goggles. When laser welding, always wear these goggles with a laser welding helmet or hood—they’re slim enough to fit underneath. Do not wear these goggles under a regular welding helmet for laser welding, because they do not offer sufficient protection.

ANSI Z136.1—These goggles meet ANSI Z136.1 specifications for safety when using lasers.

				Lens
	Shade No.	Visible Light	Optical Density @ Wavelength	Color	Ht.	Wd.	Features	Specs. Met		Each
Polycarbonate Lens with Elastic Headband



		3	14%	7 @ 10,600 nm	Green	2"	2 1/4"	Adjustable Headband, Padded Frame	ANSI Z136.1, ANSI/ISEA Z87.1+	9188N121	000000


		5	3%	7 @ 10,600 nm	Green	2"	2 1/4"	Adjustable Headband, Padded Frame	ANSI Z136.1, ANSI/ISEA Z87.1+	9188N122	00000

Eyeglass-Fit Panoramic Welding Safety Glasses

Image of Product. Front orientation. Safety Glasses. Eyeglass-Fit Panoramic Welding Glasses.

These glasses protect your eyes from harmful infrared light while welding. Wear them over prescription eyeglasses. The lens extends around the temple for additional eye protection.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

			Frame
	Shade No.	Lens Color	Material	Color	Temple-to-Temple Wd.	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Length and -Tilt Arm

				3	Green	Polycarbonate	Black	5 13/16"	Adjustable Arms	ANSI/ISEA Z87.1+	47515T24	00000


				5	Green	Polycarbonate	Black	5 13/16"	Adjustable Arms	ANSI/ISEA Z87.1+	47515T25	0000

Laser Welding Face Shields

The lens on these shields filters out harmful light to protect your eyes during traditional and laser welding. The curved design offers better peripheral vision than laser welding goggles and additional face protection from impact, sparks, and radiation. To meet ANSI Z87.1 standards for eye protection, wear these shields with compliant safety glasses. Customize the shield’s fit by twisting the easy-turn knob on the ratchet adjustment.

ANSI Z136.1—They meet ANSI Z136.1 specifications for laser safety.

Shade Number—Shade number indicates how much light is filtered by lenses. The higher the shade number, the darker and more protective the lens.

				Lens						Hat Size
	Visible Light	Optical Density @ Wavelength	Shade No.	Color	Material	Ht.	Wd.	Thk.	Construction	Min.	Max.	Specs. Met		Each
Flip-Up Welding Lens



		2%	5 @ 850 nm to 2,700 nm 6 @ 190 nm to 400 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,000 nm to 2,500 nm 8 @ 1,200 nm to 2,450 nm	5	Green	Acrylic Plastic	5 1/2"	16 1/2"	0.1"	Solid	7	8	ANSI Z136.1	9342N122	0000000


		18%	5 @ 870 nm to 1,200 nm 6 @ 190 nm to 400 nm 6 @ 1,000 nm to 1,100 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,020 nm to 1,100 nm	3	Green	Acrylic Plastic	5 1/2"	16 1/2"	0.1"	Solid	7	8	ANSI Z136.1	9342N121	000000

Flip-Up Welding Safety Goggles

Flip between a clear lens for viewing and a green lens to protect your vision from harmful infrared light during welding. These goggles have a splash guard and are indirectly ventilated to keep liquids out. Adjust the headband to prevent the goggles from shifting or falling off.

		Lens
	Shade No.	Color	Ht.	Wd.	Features	Specs. Met		Each
Flip-Up Polycarbonate Lens with Elastic Headband



		5	Clear, Green	2"	4 1/4"	Adjustable Headband, Splash Guard	ANSI/ISEA Z87.1+	4874N11	000000

Eyeglass-Fit Welding Safety Goggles

Wear these goggles over your prescription eyeglasses. Designed for continuous-use welding, they protect your eyes from harmful infrared light.

	Safety Goggles								Replacement Headbands
		Lens
	Shade No.	Color	Ht.	Wd.	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Standard Polycarbonate Lens with Elastic Headband



		5	Green	2 3/4"	5 3/4"	Adjustable Headband	ANSI/ISEA Z87.1+	11655T21	000000	12	5465T1	000000

Arc-Flash-Protection Face Shields

Face Shield

Protect your face from low-level arc flashes when a full hood is not necessary.

All hard hats have a ratchet suspension that adjusts with an easy-turn knob.

Flip-Up Lens—The lens on these shields flips up, so you can keep your hard hat on during breaks from electrical work.

Green Lens—Shields with a green lens have a light tint that absorbs visible light and blocks glare. They let through 55% of visible light. While the green tint reduces glare, it also distorts colors, which may limit your ability to distinguish them.

PPE Category 2—These shields meet NFPA 70E standards for protection against electrical arc flashes for personal protective equipment (PPE) category 2.

ANSI/ISEA Z87.1—The shields meet ANSI/ISEA Z87.1 basic impact standards when worn with safety glasses or goggles.

Arc-Rated PPE Category—Choose shields that meet the arc rated PPE category required by your workplace.

	Face Shields																Replacement Lenses
				Lens								Hat Size
	Arc-Rated PPE Category	Arc Rating, cal/cm²	No. of Suspension Points	Properties	Color	Material	Ht.	Wd.	Thk.	Construction	Material	Min.	Max.	Specs. Met		Each		Each
Flip-Up Lens



		2	12	4	Scratch Resistant	Green	Polycarbonate	20"	9 3/4"	0.06"	Solid	Polyethylene	6 1/2	8	ANSI/ISEA Z87.1, ANSI/ISEA Z89.1, ASTM F2178	9245N112	0000000	9245N111	0000000

Laser Welding Lenses

Replace scratched lenses in your laser welding helmet or goggles. These lenses keep harmful UV and infrared light from damaging your eyes. Do not use with regular welding helmets or goggles.

Rectangle

ANSI Z136.1—To meet ANSI Z136.1 standards for protection from lasers, factor the strength of your laser.

Optical Density @ Wavelength—Optical density indicates how much light a lens absorbs at a specific wavelength. The higher the density, the more UV, infrared, and visible light is blocked. Powerful, Class 4 lasers require an optical density of 5 or higher.

Visible Light—Visible light is the percentage of visible light that passes through the lens. The lower the percentage, the more light is blocked.

			Lens			2" Ht. × 4 1/4" Wd.		4 1/2" Ht. × 5 1/4" Wd.
Shade No.	Optical Density @ Wavelength	Visible Light	Color	Material	Specs. Met		Each		Each



	3	5 @ 870 nm to 1,200 nm 6 @ 190 nm to 400 nm 6 @ 1,000 nm to 1,100 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,020 nm to 1,100 nm	18%	Green	Acrylic Plastic	ANSI Z136.1	9354N11	0000000	9354N13	0000000


	5	5 @ 850 nm to 2,700 nm 6 @ 190 nm to 400 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,000 nm to 2,500 nm 8 @ 1,200 nm to 2,450 nm	2%	Green	Acrylic Plastic	ANSI Z136.1	9354N12	000000	9354N14	000000

Round

ANSI Z136.1—To meet ANSI Z136.1 standards for protection from lasers, factor the strength of your laser.

Optical Density @ Wavelength—Optical density indicates how much light a lens absorbs at a specific wavelength. The higher the density, the more UV, infrared, and visible light is blocked. Powerful, Class 4 lasers require an optical density of 5 or higher.

Visible Light—Visible light is the percentage of visible light that passes through the lens. The lower the percentage, the more light is blocked.

				Lens
	Shade No.	Optical Density @ Wavelength	Visible Light	Color	Material	Specs. Met	Pkg. Qty.		Pkg.
2" Diameter Lens



		3	5 @ 870 nm to 1,200 nm 6 @ 190 nm to 400 nm 6 @ 1,000 nm to 1,100 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,020 nm to 1,100 nm	18%	Green	Acrylic Plastic	ANSI Z136.1	2	9354N15	0000000


		5	5 @ 850 nm to 2,700 nm 6 @ 190 nm to 400 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,000 nm to 2,500 nm 8 @ 1,200 nm to 2,450 nm	2%	Green	Acrylic Plastic	ANSI Z136.1	2	9354N16	000000

Hand-Held Welding Face Shields

Hold these lightweight face shields up to your face for quick inspection of welding activity.

ANSI/ISEA Z87.1—They meet ANSI/ISEA Z87.1 basic-impact standards when used with safety glasses or goggles.

		Lens
	Shade No.	Color	Material	Ht.	Wd.	Thk.	Construction	Includes	Specs. Met		Each
Standard Welding Lens



		10	Green	Polycarbonate	2"	4 1/4"	1/8"	Solid	Handle, Lens Cover	ANSI/ISEA Z87.1	5470T24	000000

Filter Lenses for Welding Helmets and Goggles

Replace the filter lens on your welding helmet or goggles. These lenses reduce glare and filter out harmful infrared radiation. They are available in shade numbers 4 through 14.

Rectangle

Green Lens—Use green lenses for welding applications. They increase visual contrast so you can see the weld pool without making the environment too dark.

		Lens
	Shade No.	Ht. × Wd.	Material		Each
Single Shade







				Green Lens

				4	2" × 4 1/4"	Polycarbonate	5424T34	00000


				4	4 1/2" × 5 1/4"	Glass	5424T115	0000
				5	2" × 4 1/4"	Polycarbonate	5424T35	0000
				5	4 1/2" × 5 1/4"	Glass	5424T116	0000
				6	2" × 4 1/4"	Polycarbonate	5424T36	0000
				6	4 1/2" × 5 1/4"	Glass	5424T117	0000
				8	2" × 4 1/4"	Glass	5424T121	0000
				8	4 1/2" × 5 1/4"	Glass	5424T118	0000
				9	2" × 4 1/4"	Polycarbonate	5424T38	0000
				9	4 1/2" × 5 1/4"	Polycarbonate	5424T61	00000
				10	2" × 4 1/4"	Glass	5424T39	0000


				10	4 1/2" × 5 1/4"	Polycarbonate	5424T62	00000
				11	2" × 4 1/4"	Polycarbonate	5424T41	0000
				11	4 1/2" × 5 1/4"	Polycarbonate	5424T63	00000
				12	2" × 4 1/4"	Polycarbonate	5424T42	0000
				12	4 1/2" × 5 1/4"	Polycarbonate	5424T64	00000
				14	2" × 4 1/4"	Glass	5424T122	0000
				14	4 1/2" × 5 1/4"	Glass	5424T119	00000

Round

Green Lens—Use green lenses for welding applications. They increase visual contrast so you can see the weld pool without making the environment too dark.

		Lens
	Shade No.	Dia.	Material	Pkg. Qty.		Pkg.
Single Shade







				Green Lens

				4	2"	Glass	2	5424T107	00000


				5	2"	Glass	2	5424T72	0000
				6	2"	Glass	2	5424T73	0000
				8	2"	Glass	2	5424T108	0000
				9	2"	Glass	2	5424T109	0000
				10	2"	Glass	2	5424T111	0000
				11	2"	Glass	2	5424T112	0000
				12	2"	Glass	2	5424T113	0000
				14	2"	Glass	2	5424T114	00000

Face Shields

Ratchet Adjustment

Ratchet Adjustment—Ratchet adjustment has an easy-turn knob.

Polycarbonate Lens—Polycarbonate lenses have greater impact resistance than acetate and PETG lenses.

Green Lens—Green lenses protect your eyes from bright light but are not intended for welding or arc-flash applications.

ANSI/ISEA Z87.1+—These face shields meet ANSI/ISEA impact standards when worn with safety glasses or goggles.

	Face Shields									Replacement Lenses
	Lens				Hat Size
	Color	Ht.	Wd.	Thk.	Min.	Max.	Specs. Met		Each		Each
Face Shield—Ratchet Adjustment







				Polycarbonate Lens

				Green	8"	15 1/2"	0.04"	6 1/2	8	ANSI/ISEA Z87.1+	56505T71	000000	56505T711	00000

Flip-Up Welding Safety Glasses

Image of ProductInUse. Front orientation. Safety Glasses. Flip-Up Welding Glasses.

Flip between clear lenses for viewing and welding lenses that protect your vision from harmful infrared light. These glasses are curved, so they sit close to your face to protect against debris. For a comfortable fit, you can adjust how these glasses sit on your cheeks and nose.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

Adjustable Nosepiece—Widen or pinch the nosepiece to sit securely on your nose.

		Lens		Frame
	Shade No.	Properties	Color	Material	Color	Arm Type	Temple-to-Temple Wd.	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Tilt Arm

				3	Scratch Resistant, Fog-Free	Clear/Green	Nylon/Polycarbonate	Black	Rigid	5 1/4"	Padded Nosepiece, Padded Arm Tips, Adjustable Nosepiece	ANSI/ISEA Z87.1+	4814N11	000000


				5	Scratch Resistant, Fog-Free	Clear/Green	Nylon/Polycarbonate	Black	Rigid	5 1/4"	Padded Nosepiece, Padded Arm Tips, Adjustable Nosepiece	ANSI/ISEA Z87.1+	4814N12	00000

Frameless Safety Sunglasses


Style D	Style E	Green Mirrored

Constructed without a frame, these sunglasses won't obstruct your view.

Mirrored Lens—Mirrored lenses reflect the most sunlight.

Padded Nosepiece and Padded Arm Tips—Padded arm tips or a padded nosepiece keep glasses comfortably in place.

		Lens
	Style	Properties	Color	Appearance	Arm Type	Temple-to-Temple Wd.	UV Protection Rating	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Fixed Arm

				D	Scratch Resistant	Green	Mirrored	Rigid	5"	99.0%	Padded Nosepiece, Padded Arm Tips, Spring-Hinged Arms	ANSI/ISEA Z87.1+	7587T4	000000




						Adjustable-Length Arm

						E	Scratch Resistant	Green	Mirrored	Rigid	5 1/4"	99.9%	Padded Nosepiece	ANSI/ISEA Z87.1+	7587T15	00000

Panoramic Welding Safety Glasses

Image of Product. Front orientation. Safety Glasses. Panoramic Welding Glasses.

These glasses protect your eyes from harmful infrared light while welding. The lens extends around the temple for additional eye coverage.

			Frame
	Shade No.	Lens Color	Material	Color	Temple-to-Temple Wd.	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Length Arm

				3	Green	Nylon	Black	5 7/8"	Adjustable Arms	ANSI/ISEA Z87.1+	9313T4	00000


				5	Green	Nylon	Black	5 7/8"	Adjustable Arms	ANSI/ISEA Z87.1+	9313T5	0000

Hard-Hat Mount Welding Face Shields


	Replacement Lenses

Ideal for welders that face flying debris, these shields give you full face protection and snap onto a hard hat. When you’re ready to weld, flip down the welding lens. They’re compatible with any cap-style hard hat with slots.

Green Lens—Shields with a green lens filter out infrared light emitted during welding.

	Face Shields												Replacement Lenses
		Lens
	Shade No.	Properties	Color	Material	Ht.	Wd.	Thk.	Construction	Bracket Material	Specs. Met		Each		Each
Flip-Up Welding Lens



		3	Glare Reducing	Green	Polycarbonate	4"	15 1/2"	0.06"	Solid	Nylon	ANSI/ISEA Z87.1+	9076N101	0000000	9076N104	000000


		5	Glare Reducing	Green	Polycarbonate	4"	15 1/2"	0.06"	Solid	Nylon	ANSI/ISEA Z87.1+	9076N102	000000	9076N105	00000

Replacement Lenses

Lens
Clear	Polycarbonate	8"	15 1/2"	0.06"	ANSI/ISEA Z87.1+	9076N107	000000

Scratch-Resistant Face Shields


Face Shield	Face Shield with Chin Guard	Extenders for Face Shields

The scratch-resistant coating on these face shields extends the lens life.

Chin Guard—Face shields with chin guard provide added protection.

Ratchet Adjustment—They have a ratchet adjustment with an easy-turn knob.

ANSI/ISEA Z87.1+—Shields meet ANSI/ISEA Z87.1+ high-impact standards when worn with safety glasses or goggles.

Extenders for Face Shields—Attach the shield extenders to these face shields for an extra 3” of coverage on each side of your face. Once in place, they’ll overlap the face shields so nothing passes through.

	Face Shields												Replacement Lenses		Replacement Face Shield Suspensions		Extenders for Face Shields
	Lens							Hat Size
	Properties	Material	Color	Ht.	Wd.	Thk.	UV Protection Rating	Min.	Max.	Specs. Met		Each		Each		Each		Pair
Face Shields







				Ratchet Adjustment

				Scratch Resistant, Oil Resistant, Glare Reducing	Polycarbonate	Green	8"	14"	0.105"	Not Rated	6 1/2	8	ANSI/ISEA Z87.1+	10865T93	000000	10865T931	000000	51865T67	000000	10865T18	000000


				Face Shields With Black Chin Guard







								Ratchet Adjustment

								Scratch Resistant, Oil Resistant, Glare Reducing	Polycarbonate	Green	8"	14"	0.105"	Not Rated	6 1/2	8	ANSI/ISEA Z87.1+	10865T94	00000	10865T941	00000	51865T67	00000	10865T18	00000

Welding Face Shields


Face Shield	Face Shield with Chin Guard	Face Shield with Flip-Up Welding Lens

For full-face protection while welding, select one of these shields. All have a ratchet adjustment with an easy-turn knob.

Flip-Up Welding Lens—Flip-up lenses have a welding shade that raises to expose a viewing lens. These shields are good for cutting and brazing jobs.

Chin Guard—Face shields with chin guard provide added protection.

ANSI/ISEA Z87.1+—They meet ANSI/ISEA Z87.1+ high-impact standards when worn with safety glasses or goggles.

	Face Shields													Replacement Lenses		Replacement Shade No. 5 Lenses		Replacement Lens Covers
		Lens						Hat Size
	Shade No.	Color	Material	Ht.	Wd.	Thk.	Construction	Min.	Max.	Features	Specs. Met		Each		Each		Each		Each
Standard Welding Lens



		5	Green	Acetate	6 1/2"	19 1/2"	0.06"	Solid	6 1/2	8	Chin Guard	ANSI/ISEA Z87.1+	13185T26	000000	13185T27	000000	———	0	———	0


		5	Green	Polycarbonate	9"	12"	0.06"	Solid	6 1/2	8	—	ANSI/ISEA Z87.1+	13185T347	00000	13185T345	00000	———	0	———	0
		9	Green	Polycarbonate	8"	14"	0.1"	Solid	6 1/2	8	Chin Guard	ANSI/ISEA Z87.1+	3513T4	000000	———	0	———	0	3513T8	000000


		Flip-Up Welding Lens



				5	Green	Polycarbonate	4 1/2"	9"	0.07"	Solid	6 1/2	8	Concealed Viewing Lens	ANSI/ISEA Z87.1+	4263T44	00000	4263T57	00000	4263T62	000000	———	0


				8	Green	Polycarbonate	4 1/2"	9"	0.07"	Solid	6 1/2	8	Concealed Viewing Lens	ANSI/ISEA Z87.1+	4263T111	00000	4263T112	00000	———	0	———	0