5 Shade Number Safety Goggles

Filter by

Shade Number

Application

Lens Color

Color

Garment

Performance

Lens Style

Specifications Met

Lens Height

Shape

Lens Properties

Lens Width

Shade Type

Optical Density @ Wavelength

6 @ 190 nm to 400 nm

5 @ 850 nm to 2,700 nm

7 @ 1,000 nm to 2,500 nm

8 @ 1,200 nm to 2,450 nm

6 @ 9,000 nm to 11,000 nm

Lens Material

Visible Light

Welding Lens Type

Lens Size

DFARS Specialty Metals

Material

UV Protection Rating

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Frame Color

RoHS

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

36 Products

Laser Welding Safety Glasses

Shield your eyes from harmful light during laser or traditional welding. These glasses meet ANSI Z136.1 specifications for laser safety. Since they can be worn for traditional welding as well as laser welding, you can switch between the two without needing to swap out your safety glasses. When laser welding, always wear them with a laser welding helmet or hood—they’re slim enough to fit underneath without a problem. Do not wear these glasses under a regular welding helmet when laser welding—they do not offer sufficient protection.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

Visible Light—Visible light is the percentage of visible light that passes through the lens. The lower the percentage, the more light is blocked. Make sure enough light passes through to see your welding work clearly but not so much that it becomes dangerous.

Optical Density @ Wavelength—Optical density indicates how much light a lens absorbs at a specific wavelength. The higher the density, the more UV, infrared, and visible light is blocked. Powerful lasers often require an optical density of 5 or higher.

					Frame
	Shade No.	Visible Light	Optical Density @ Wavelength	Lens Color	Material	Color	Arm Type	Temple-to-Temple Wd.	UV Protection Rating	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Length and -Tilt Arm

				5	2.5%	7 @ 10,600 nm	Green	Nylon	Black	Rigid	5 5/16"	Not Rated	Adjustable Arms	ANSI Z136.1, ANSI/ISEA Z87.1	9346N122	000000

Close-Fit Face Shields

Flip-Up Lens

The snug-fitting goggles attached to this face shield add protection from dust, liquids, and debris. They are designed to fit over most prescription glasses.

Flip-Up Lens—Shields with a flip-up lens are ideal for switching between tasks. Flip the shield down for full face protection, or flip it up when you only need to protect your eyes. You can also detach the shield when it’s not needed.

Shade Number—Those with a goggle shade number protect your eyes from infrared light, such as during light brazing and plasma cutting.

		Lens						Frame						Face Shield
	Shade No.	Properties	Material	Wd.	Thk.	Construction	Color	Material	Color	Headband Material	UV Protection Rating	Features	Specs. Met	Material	Wd.	Ht.	Color		Each
Flip-Up Lens



		5	Fog-Free, Ventilated	Polycarbonate	6 3/4"	0.06"	Solid	Green	Vinyl Plastic	Black	Plastic	99.9%	Flame-Retardant Adjustable Headband	ANSI/ISEA Z87.1+	Polycarbonate	7 3/8"	5"	Green	9219N113	000000

Wraparound Laser-Protection Welding Safety Goggles

An adjustable strap keeps these goggles secure on your head better than safety glasses. Use them to guard your eyes from harmful light during laser welding and traditional welding. Since they can be worn for both traditional and laser welding, you can switch between the two without needing to swap out your safety goggles. When laser welding, always wear these goggles with a laser welding helmet or hood—they’re slim enough to fit underneath. Do not wear these goggles under a regular welding helmet for laser welding, because they do not offer sufficient protection.

ANSI Z136.1—These goggles meet ANSI Z136.1 specifications for safety when using lasers.

				Lens
	Shade No.	Visible Light	Optical Density @ Wavelength	Color	Ht.	Wd.	Features	Specs. Met		Each
Polycarbonate Lens with Elastic Headband



		5	3%	7 @ 10,600 nm	Green	2"	2 1/4"	Adjustable Headband, Padded Frame	ANSI Z136.1, ANSI/ISEA Z87.1+	9188N122	000000

Welding Safety Goggles


Style B	Style C

Designed for continuous-use welding, these goggles protect your eyes from harmful infrared light.

Padded Frame—Goggles with a padded frame provide added comfort.

Splash Guard—Lenses with splash guard are indirectly ventilated to keep liquids out too.

			Lens
	Style	Shade No.	Color	Ht.	Wd.	Features	Specs. Met		Each
Polycarbonate Lens with Elastic Headband



		B	5	Green	2"	4 1/4"	Adjustable Headband, Splash Guard	ANSI/ISEA Z87.1+	5444T107	000000


		Wraparound Polycarbonate Lens with Elastic Headband



				C	5	Green	1 1/2"	2 1/2"	Adjustable Headband, Padded Frame	ANSI/ISEA Z87.1	5444T104	00000

Eyeglass-Fit Panoramic Welding Safety Glasses

Image of Product. Front orientation. Safety Glasses. Eyeglass-Fit Panoramic Welding Glasses.

These glasses protect your eyes from harmful infrared light while welding. Wear them over prescription eyeglasses. The lens extends around the temple for additional eye protection.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

			Frame
	Shade No.	Lens Color	Material	Color	Temple-to-Temple Wd.	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Length and -Tilt Arm

				5	Green	Polycarbonate	Black	5 13/16"	Adjustable Arms	ANSI/ISEA Z87.1+	47515T25	00000

Flip-Up Welding Safety Goggles

Flip between a clear lens for viewing and a green lens to protect your vision from harmful infrared light during welding. These goggles have a splash guard and are indirectly ventilated to keep liquids out. Adjust the headband to prevent the goggles from shifting or falling off.

		Lens
	Shade No.	Color	Ht.	Wd.	Features	Specs. Met		Each
Flip-Up Polycarbonate Lens with Elastic Headband



		5	Clear, Green	2"	4 1/4"	Adjustable Headband, Splash Guard	ANSI/ISEA Z87.1+	4874N11	000000

Eyeglass-Fit Welding Safety Goggles

Wear these goggles over your prescription eyeglasses. Designed for continuous-use welding, they protect your eyes from harmful infrared light.

	Safety Goggles								Replacement Headbands
		Lens
	Shade No.	Color	Ht.	Wd.	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Standard Polycarbonate Lens with Elastic Headband



		5	Green	2 3/4"	5 3/4"	Adjustable Headband	ANSI/ISEA Z87.1+	11655T21	000000	12	5465T1	000000

Laser Welding Face Shields

The lens on these shields filters out harmful light to protect your eyes during traditional and laser welding. The curved design offers better peripheral vision than laser welding goggles and additional face protection from impact, sparks, and radiation. To meet ANSI Z87.1 standards for eye protection, wear these shields with compliant safety glasses. Customize the shield’s fit by twisting the easy-turn knob on the ratchet adjustment.

ANSI Z136.1—They meet ANSI Z136.1 specifications for laser safety.

Shade Number—Shade number indicates how much light is filtered by lenses. The higher the shade number, the darker and more protective the lens.

				Lens						Hat Size
	Visible Light	Optical Density @ Wavelength	Shade No.	Color	Material	Ht.	Wd.	Thk.	Construction	Min.	Max.	Specs. Met		Each
Flip-Up Welding Lens



		2%	5 @ 850 nm to 2,700 nm 6 @ 190 nm to 400 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,000 nm to 2,500 nm 8 @ 1,200 nm to 2,450 nm	5	Green	Acrylic Plastic	5 1/2"	16 1/2"	0.1"	Solid	7	8	ANSI Z136.1	9342N122	0000000

Wraparound Welding Safety Glasses


Style A	Style B	Style C

These glasses protect your eyes from harmful infrared light while welding.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

Padded Nosepiece and Padded Frame—Glasses with a padded frame or padded nosepiece provide added comfort.

			Lens		Frame
	Style	Shade No.	Properties	Color	Material	Color	Arm Type	Temple-to-Temple Wd.	UV Protection Rating	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Fixed Arm

				A	5	Scratch Resistant	Green	Nylon	Black	Flexible	5 3/8"	100.0%	Padded Nosepiece, Padded Arm Tips	ANSI/ISEA Z87.1	5803T106	000000




						Adjustable-Length and -Tilt Arm

						B	5	Scratch Resistant	Green	Nylon	Black	Rigid	5 1/2"	—	Padded Frame	ANSI/ISEA Z87.1+	5803T123	0000


						Oversized Polycarbonate Lens







										Adjustable-Length Arm

										C	5	Scratch Resistant	Green	Nylon	Black	Rigid	5 5/8"	—	Padded Nosepiece, Padded Arm Tips, Padded Frame	ANSI/ISEA Z87.1+, CAN/CSA Z94.3	5803T125	0000

Hard-Hat Mount Welding Face Shields


	Replacement Lenses

Ideal for welders that face flying debris, these shields give you full face protection and snap onto a hard hat. When you’re ready to weld, flip down the welding lens. They’re compatible with any cap-style hard hat with slots.

Blue Lens—Shields with a blue lens increase visibility for tasks that emit bright yellow light, such as welding steel.

Green Lens—Shields with a green lens filter out infrared light emitted during welding.

	Face Shields												Replacement Lenses
		Lens
	Shade No.	Properties	Color	Material	Ht.	Wd.	Thk.	Construction	Bracket Material	Specs. Met		Each		Each
Flip-Up Welding Lens



		5	Glare Reducing	Blue	Polycarbonate	4"	15 1/2"	0.06"	Solid	Nylon	ANSI/ISEA Z87.1+	9076N103	000000	9076N106	000000


		5	Glare Reducing	Green	Polycarbonate	4"	15 1/2"	0.06"	Solid	Nylon	ANSI/ISEA Z87.1+	9076N102	000000	9076N105	00000

Replacement Lenses

Lens
Clear	Polycarbonate	8"	15 1/2"	0.06"	ANSI/ISEA Z87.1+	9076N107	000000

Filter Lenses for Welding Helmets and Goggles

Replace the filter lens on your welding helmet or goggles. These lenses reduce glare and filter out harmful infrared radiation. They are available in shade numbers 4 through 14.

Rectangle

Green Lens—Use green lenses for welding applications. They increase visual contrast so you can see the weld pool without making the environment too dark.

		Lens
	Shade No.	Ht. × Wd.	Material		Each
Single Shade







				Green Lens

				5	2" × 4 1/4"	Polycarbonate	5424T35	00000


				5	4 1/2" × 5 1/4"	Glass	5424T116	0000

Round

Green Lens—Use green lenses for welding applications. They increase visual contrast so you can see the weld pool without making the environment too dark.

		Lens
	Shade No.	Dia.	Material	Pkg. Qty.		Pkg.
Single Shade







				Green Lens

				5	2"	Glass	2	5424T72	00000

Laser Welding Lenses

Replace scratched lenses in your laser welding helmet or goggles. These lenses keep harmful UV and infrared light from damaging your eyes. Do not use with regular welding helmets or goggles.

Rectangle

ANSI Z136.1—To meet ANSI Z136.1 standards for protection from lasers, factor the strength of your laser.

Optical Density @ Wavelength—Optical density indicates how much light a lens absorbs at a specific wavelength. The higher the density, the more UV, infrared, and visible light is blocked. Powerful, Class 4 lasers require an optical density of 5 or higher.

Visible Light—Visible light is the percentage of visible light that passes through the lens. The lower the percentage, the more light is blocked.

			Lens			2" Ht. × 4 1/4" Wd.		4 1/2" Ht. × 5 1/4" Wd.
Shade No.	Optical Density @ Wavelength	Visible Light	Color	Material	Specs. Met		Each		Each



	5	5 @ 850 nm to 2,700 nm 6 @ 190 nm to 400 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,000 nm to 2,500 nm 8 @ 1,200 nm to 2,450 nm	2%	Green	Acrylic Plastic	ANSI Z136.1	9354N12	0000000	9354N14	0000000

Round

ANSI Z136.1—To meet ANSI Z136.1 standards for protection from lasers, factor the strength of your laser.

Optical Density @ Wavelength—Optical density indicates how much light a lens absorbs at a specific wavelength. The higher the density, the more UV, infrared, and visible light is blocked. Powerful, Class 4 lasers require an optical density of 5 or higher.

Visible Light—Visible light is the percentage of visible light that passes through the lens. The lower the percentage, the more light is blocked.

				Lens
	Shade No.	Optical Density @ Wavelength	Visible Light	Color	Material	Specs. Met	Pkg. Qty.		Pkg.
2" Diameter Lens



		5	5 @ 850 nm to 2,700 nm 6 @ 190 nm to 400 nm 6 @ 9,000 nm to 11,000 nm 7 @ 1,000 nm to 2,500 nm 8 @ 1,200 nm to 2,450 nm	2%	Green	Acrylic Plastic	ANSI Z136.1	2	9354N16	0000000

Auto-Darkening Welding Safety Goggles with Hood


Goggles with Hood Attached	Goggles with Hood Detached

Get up close to your welds with these goggles. Their lightweight, compact design lets you weld in tight spots or awkward positions. A flame-resistant hood shields your ears, head, and neck from sparks and spatter better than traditional welding helmets. For different protection needs, wear them over prescription glasses, under a hard hat, or without the hood. Use the external controls to adjust power and shade settings without removing these goggles.

As you begin to weld, two sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these goggles use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain.

Welding Lens Optical Clarity—Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

			Hood			Welding Lens		Lens
	Application	Specs. Met	Color	Material	Shade No.	Optical Clarity	Properties	Color	Material	Construction	Ht.	Wd.	Features	Clothing Size	Wt., lb.	Batteries Included	Switching Time, ms	No. of Arc Sensors		Each
With Slider Adjustment, Inner Filter Lens Cover, and Outer Filter Lens Cover



		Welding, Heat Protection, Safety	ANSI/ISEA Z87.1	Black	Cotton Fabric	3, 5, 6, 7, 8, 9, 10, 11, 12	1/1/1/2	Auto Darkening, True Color	Blue	Polycarbonate	Solid	2"	4 1/4"	Digital Controls, External Controls	One Size	1.6	Yes	0.07	2	9356N111	0000000

Replacements for Hoods

Hood
Black	Cotton Fabric	One Size	9356N112	000000

For Lens
2"	4 1/4"	Five Replacement Outer Filter Lens Covers, Three Replacement Inner Filter Lens Covers	9356N113	000000

Flip-Up Welding Safety Glasses

Image of ProductInUse. Front orientation. Safety Glasses. Flip-Up Welding Glasses.

Flip between clear lenses for viewing and welding lenses that protect your vision from harmful infrared light. These glasses are curved, so they sit close to your face to protect against debris. For a comfortable fit, you can adjust how these glasses sit on your cheeks and nose.

Adjustable-Tilt Arm—Glasses with adjustable-tilt arms have ratcheting hinges that allow you to angle the glasses toward or away from your cheeks for a comfortable fit.

Adjustable Nosepiece—Widen or pinch the nosepiece to sit securely on your nose.

		Lens		Frame
	Shade No.	Properties	Color	Material	Color	Arm Type	Temple-to-Temple Wd.	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Tilt Arm

				5	Scratch Resistant, Fog-Free	Clear/Green	Nylon/Polycarbonate	Black	Rigid	5 1/4"	Padded Nosepiece, Padded Arm Tips, Adjustable Nosepiece	ANSI/ISEA Z87.1+	4814N12	000000

Panoramic Welding Safety Glasses

Image of Product. Front orientation. Safety Glasses. Panoramic Welding Glasses.

These glasses protect your eyes from harmful infrared light while welding. The lens extends around the temple for additional eye coverage.

			Frame
	Shade No.	Lens Color	Material	Color	Temple-to-Temple Wd.	Features	Specs. Met		Each
Regular Polycarbonate Lens







				Adjustable-Length Arm

				5	Green	Nylon	Black	5 7/8"	Adjustable Arms	ANSI/ISEA Z87.1+	9313T5	00000

Welding Face Shields


Face Shield	Face Shield with Chin Guard	Face Shield with Flip-Up Welding Lens

For full-face protection while welding, select one of these shields. All have a ratchet adjustment with an easy-turn knob.

Flip-Up Welding Lens—Flip-up lenses have a welding shade that raises to expose a viewing lens. These shields are good for cutting and brazing jobs.

Chin Guard—Face shields with chin guard provide added protection.

ANSI/ISEA Z87.1+—They meet ANSI/ISEA Z87.1+ high-impact standards when worn with safety glasses or goggles.

	Face Shields													Replacement Lenses		Replacement Shade No. 5 Lenses
		Lens						Hat Size
	Shade No.	Color	Material	Ht.	Wd.	Thk.	Construction	Min.	Max.	Features	Specs. Met		Each		Each		Each
Standard Welding Lens



		5	Green	Acetate	6 1/2"	19 1/2"	0.06"	Solid	6 1/2	8	Chin Guard	ANSI/ISEA Z87.1+	13185T26	000000	13185T27	000000	———	0


		5	Green	Polycarbonate	9"	12"	0.06"	Solid	6 1/2	8	—	ANSI/ISEA Z87.1+	13185T347	00000	13185T345	00000	———	0


		Flip-Up Welding Lens



				5	Green	Polycarbonate	4 1/2"	9"	0.07"	Solid	6 1/2	8	Concealed Viewing Lens	ANSI/ISEA Z87.1+	4263T44	00000	4263T57	00000	4263T62	000000

For Lens
Ht.	Wd.	Includes		Each
2"	4 1/4"	Five Replacement Outer Filter Lens Covers, Three Replacement Inner Filter Lens Covers	9356N113	000000