McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    55 Products

    Fall-Arrest Anchors

    Connect fall-arrest lanyards to these anchor points. You'll want to install these into an approved, stable surface that is strong enough to support someone. When used together with a lanyard and a harness, they help you meet OSHA and ANSI safety standards.
    Bolt On
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Bolt On.
    Stainless Steel—Stainless steel anchors resist corrosion, so they stand up to outdoor elements and in spaces where moisture and grime could weaken the anchor.
    Mounting
    Holes
    Material
    Dia.
    No.
    of
    Fasteners
    Included
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Steel1/2"2NoD-RingRigid5,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
    Stainless Steel1/2"2NoD-RingRigid5,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     
    Quick Install Push In
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Push-In Attachment.
    Quick-install push-in anchors mount overhead into vertical holes in steel without requiring any tools. Pull the collar back to retract the spring-loaded blade and slide the anchor into the hole. When you release, the blade rotates to lock the anchor in place. When you’re done, pull the collar back to remove the anchor.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    3/4" to 1 1/4"SteelD-RingRigid5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     
    Weld On
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Weld On.
    Weld-on anchors swivel 360°, so your lanyard turns smoothly with you as you move.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    SteelD-RingSwivel10,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     

    I-Beam Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors.
    Image of Product. Stationary. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Stationary.
    Image of Product. Rolling with Roller Bearings. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Stationary

    Rolling with Roller Bearings

    Image of Product. Rolling. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Rolling

    Clamp these anchors onto I-beams—they give you a secure place to clip your fall-arrest lanyard without damaging the beam surface. Plus, they’re reusable and don’t require tools to install and remove. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Clamp On
    Image of Product. Stationary. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Stationary.
    Image of Product. Rolling with Roller Bearings. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Stationary

    Rolling with Roller Bearings

    Image of Product. Rolling. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Rolling.

    Rolling

    Stationary—Stationary anchors mount to horizontal and vertical I-beams. They’re great when working in a single location.
    Rolling—Rolling anchors move with you, so you’re free to work along the length of the beam.
    Roller Bearings—Those with roller bearings are best when you need to move back and forth frequently. They roll along the beam with less effort than with other mobile anchors.
    Bronze Insert—Those with bronze inserts glide smoothly for easy movement.
    For I-Beam
    Flange
    Wd.
    Thk.
    Material
    Insert
    Material
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Stationary
    4" to 14"1 1/2"Stainless Steel—D-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     
    Rolling
    3 1/2" to 14"1 1/4"Aluminum—D-Ring5,000400ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
    12" to 30"2 1/2"AluminumBronzeD-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     
    Rolling with Roller Bearings
    4" to 14"1 1/8"Stainless Steel—D-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     

    Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors.
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.
    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing

    Webbing with Cinching

    Buckle

    Image of Product. Wire Rope. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope.
    Image of Product. Wire Rope with Roller Cable and Carabiner. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope with Roller Cable and Carabiner.

    Wire Rope

    Wire Rope with Roller Cable and

    Carabiner

    Move these anchors between work sites—they loop around beams, rails, and other approved structures. They’re quick to install and don’t require any tools. Plus, they won’t damage your anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.
    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing

    Webbing with Cinching

    Buckle

    Image of Product. Wire Rope. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope.
    Image of Product. Wire Rope with Roller Cable and Carabiner. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope with Roller Cable and Carabiner.

    Wire Rope

    Wire Rope with Roller Cable and

    Carabiner

    Wire Rope—Wire rope anchors resist cuts and abrasion better than webbing anchors, so they last longer.
    Cinching Buckle—Anchors with a cinching buckle, also known as boom straps, are designed to be attached to the arm of a bucket truck. Tighten them for a snug, nonslip fit.
    Roller Cable—Anchors with a roller cable are a good choice when you have to move back and forth while staying tethered. Use the included carabiner to attach the two loop ends together.
    Nylon Liner—Webbing anchors with a nylon liner have an extra layer to protect the webbing from wear and tear.
    Lg.,
    ft.
    Material
    Liner
    Material
    Connection Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    3Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
    6Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
    12Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
     
    Webbing with Cinching Buckle
    4Polyester Fabric—D-Ring5,000350ANSI/ASSP A10.32, ANSI/ASSP Z359.10000000000000
     
    Wire Rope
    4Steel—Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
    6Steel—Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
     
    Wire Rope with Roller Cable and Carabiner
    6Steel—Reinforced Loop × Reinforced Loop5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     

    Concrete Fall-Arrest Anchors

    Clip your fall-arrest lanyard to a secure connection point on approved concrete surfaces. These anchors expand into a hole, locking against the sides to form a secure hold. They swivel 360° as you move. When used together with a harness and lanyard, these anchors help you meet ANSI and OSHA safety standards.
    Wedge In
    Image of Product. Front orientation. Fall-Arrest Anchors. Concrete Fall-Arrest Anchors, Wedge In.
    Wedge-in anchors are more secure than push-in anchors. They expand in the hole as you turn the bolt.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    3/4"SteelD-RingSwivel10,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     
    Push In
    Image of Product. Front orientation. Fall-Arrest Anchors. Concrete Fall-Arrest Anchors, Push In.
    Push-in anchors are easier to install than wedge anchors, and they’re reusable. Expand and release them by pushing a button. You can attach them to vertical or horizontal surfaces. Made of stainless steel, they resist the weather and grime that could decrease an anchor’s lifespan.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    3/4"Stainless SteelD-RingSwivel5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000000
     

    Shock-Absorbing Fall-Arrest Lanyards with Anchor

    Image of ProductInUse. Wraparound. Back orientation. Wraparound Anchor Point. Shock-Absorbing Fall-Arrest Lanyards with Anchor.

    Wraparound

    Image of Product. Front orientation. Fall-Arrest Lanyards. Shock-Absorbing Fall-Arrest Lanyards with Anchor, Wraparound with 1 Anchor End Connection.
    Image of Product. Front orientation. Fall-Arrest Lanyards. Shock-Absorbing Fall-Arrest Lanyards with Anchor, Wraparound with 2 Anchor End Connections.

    Wraparound with 1 Anchor End

    Connection

    Wraparound with 2 Anchor End

    Connections

    A lanyard and an anchor in one—these lanyards attach to rated structures to give you a secure place to clip in for fall protection. If you fall when working at height, these lanyards extend to slow and stop your fall. However, you'll fall farther than you would with a quick-stop lanyard. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.
    Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.
    1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in a single location.
    2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.
    Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.
    RFID Tag—Lanyards with an RFID tag can be scanned to log inspections, track usage, and schedule maintenance to keep your lanyard compliant with safety regulations.
    Harness End
    Connection
    Anchor End
    Connection
    Lg.,
    ft.
    Lg. After
    Fall, ft.
    Material
    Hardware
    Material
    Hardware
    Material
    Snap Hook
    Opening Size
    Wt. Cap.,
    lb.
    Specs. Met
    Features
    Each
    Wraparound with 1 Anchor End Connection
     
    Shock Absorbing Webbing
    610Polyester PlasticSnap HookSteelSnap HookSteel3/4"310ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502RFID Tag0000000000000
     
    Wraparound with 2 Anchor End Connections
     
    Shock Absorbing Webbing
    610Polyester PlasticSnap HookSteelSnap HookSteel3/4"310ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502RFID Tag0000000000000
     

    Strut Channel Fall-Arrest Anchors

    Sliding in a track, these anchors give you freedom of movement while staying safely tethered. They fit into strut channels embedded in concrete for a secure place to clip your fall-arrest lanyard. They take just seconds to install and remove—the two sides of the anchor hook separately into your strut channel and lock together with a carabiner. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.
    Slide In
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Strut Channel Fall-Arrest Anchors.
    Image of Product. Front orientation. Fall-Arrest Anchors. Strut Channel Fall-Arrest Anchors.
    For Channel
    Wd.
    Material
    Connection
    Hardware
    Carabiner
    Material
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    With Carabiner
    1 5/8"Zinc-Plated SteelCarabinerSteel5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     

    Twist-Locking-Latch Carabiners—Not for Lifting

    Image of Product. Side1 orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 3.
    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 4.
    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 5.
    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 6.
    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 7.

    Style 3

    Style 4

    Style 5

    Style 6

    Style 7

    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 8.
    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 9.
    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 12.
    Image of Product. Front orientation. Carabiners. Twist-Locking-Latch Carabiners—Not for Lifting, Style 17.
    Image of Attribute. Front orientation. Contains Annotated. Twist-Locking-Latch Carabiners—Not for Lifting.

    Style 8

    Style 9

    Style 12

    Style 17

    Image of Specification. Front orientation. Straight Open Latch Position. Twist-Locking-Latch Carabiners—Not for Lifting.
    Image of Specification. Front orientation. Offset Open Latch Position. Twist-Locking-Latch Carabiners—Not for Lifting.

    Straight

    Open

    Latch

    Position

    Offset

    Open

    Latch

    Position

    Hold rope more securely than nonlocking and slide-locking-latch carabiners. While these carabiners are not as secure as screw-locking-latch carabiners, they are easier to open.
    Pull Down/Twist 90°/Push In and Lift Up/Twist 90°/Push In—Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open.
    Zinc-Plated Steel—Zinc-plated steel carabiners are mildly corrosion resistant.
    Anodized Aluminum—Anodized aluminum carabiners offer excellent corrosion resistance. They're also more lightweight than zinc-plated steel carabiners.
    17-4 PH Stainless Steel and 420 Stainless Steel—Stainless steel carabiners have excellent resistance to salt water and chemicals.
    Styles 3, 7, 8, 9, and 12—Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.
    Offset Open Latch Position—Carabiners with an offset latch position open to the side, giving you more space to attach large items.
    With Locking Indicator—Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.
    ANSI/ASSP Z359.12—Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.
    Style
    Wt. Cap.,
    lb.
    Thk.
    Opening
    Wd.
    Inside
    Lg.
    Narrow End
    Inside Wd.
    Open Latch
    Position
    Locking
    Indicator
    Color
    Specs. Met
    Certification
    Each
    Pull Down/Twist 90°/Push In
     
    17-4 PH Stainless Steel
    38,9007/16"15/16"3 1/2"1 5/16"OffsetYes—ANSI/ASSP Z359.12CE Marked
    		0000000000000
    48,9007/16"15/16"3 1/2"1 1/4"OffsetYes—ANSI/ASSP Z359.12CE Marked
    		000000000000
    511,2007/16"1 3/16"4 1/16"1 3/4"OffsetYes—ANSI/ASSP Z359.12CE Marked
    		000000000000
     
    Lift Up/Twist 90°/Push In
     
    Zinc-Plated Steel
    65,0007/16"13/16"3 1/4"1 1/4"StraightNoGoldANSI/ASSP Z359.12—000000000000
    75,0007/16"1"4"3/8"StraightNoGoldANSI/ASSP Z359.12—000000000000
    85,0009/16"2 1/4"7 1/2"1 13/16"StraightNoGoldANSI/ASSP Z359.12—000000000000
    95,0009/16"1 3/16"6 1/8"7/8"StraightNoGoldANSI/ASSP Z359.12—0000000000000
     
    Anodized Aluminum
    125,0001/2"7/8"3 3/4"1"StraightNo—ANSI/ASSP Z359.12—000000000000
    125,00011/16"2"8"7/8"StraightNo—ANSI/ASSP Z359.12—0000000000000
    175,0001/2"13/16"3 1/2"7/8"StraightNo—ANSI/ASSP Z359.12—000000000000
     
    420 Stainless Steel
    65,0007/16"7/8"3 7/16"1 1/8"StraightNo—ANSI/ASSP Z359.12—000000000000
     

    Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors.
    Made of Kevlar, these anchors withstand high heat and electrical arcs that would weaken a standard webbing anchor. They’ve been tested against the highest level of electrical arc-flash hazards to meet ASTM F887. Loop them around beams, rails, and other approved structures—they’re easy to move between work sites. Their webbing construction makes them lightweight and flexible. Plus, they won’t damage the anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Lg.,
    ft.
    Material
    Connection Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    4KevlarD-Ring × Webbing Loop5,000425ANSI/ASSP Z359.18, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.50200000000000000
     

    Clamp-On Fall-Arrest Anchors

    Image of ProductInUse. Side1 orientation. Fall-Arrest Anchors. Clamp-On Fall-Arrest Anchors.
    A secure hold that won’t damage your mounting surface—these anchors clamp onto stable structures such as half-walls to give you a place to clip your fall-arrest lanyard. Even though they clamp, they grip firmly with set screws and a locking pin. Made of powder-coated steel, they’re tough enough to stand up to frequent use, even outdoors. Protective pads on the clamp arm and set screws keep them from scratching your surface. When used with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Clamp On
    Opening
    Max.
    Min.
    Reach
    Lg.
    Material
    Color
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    15"0"8"Powder-Coated SteelBlackD-Ring5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     

    Tool Tether Attachments

    Tether almost any tool—these attachments add a ring for a lanyard connection. When used together with a lanyard and an anchor, they prevent tools from accidentally falling and hurting someone or damaging equipment below.
    Clip-On Attachment
    Image of ProductInUse. Front orientation. Tool Tether Attachments. Clip-On Attachment.
    Image of Product. Front orientation. Tool Tether Attachments. Clip-On Attachment.
    Image of Attribute. Front orientation. Contains Annotated.
    Clip-on attachments are for long-necked tools with wide ends, such as wrenches, pry bars, and hammers. The end of your tool needs to be wider than where the attachment point rests, so it won’t slip off. Made of stainless steel, they resist corrosion and are more durable than other attachments. They may slide up and down the tool as you use them. Add threadlocker to the pin to prevent loosening over time.
    ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.
    Wt. Cap.,
    lb.
    Ring Inside
    Wd.
    Ring Inside
    Lg.
    For No.
    of Tools
    Material
    Construction
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Rigid Ring
    150.4"0.75"1Stainless Steel
    		SolidANSI/ISEA 1212000000000000
    150.5"1"1Stainless Steel
    		SolidANSI/ISEA 1212000000000000
    150.65"1.25"1Stainless Steel
    		SolidANSI/ISEA 1212000000000000
    150.8"1.5"1Stainless Steel
    		SolidANSI/ISEA 1212000000000000
     
    Tape-On Attachment
    Image of ProductInUse. Front orientation. Tool Tether Attachments. Tape-On Attachment.
    Image of Product. Attachment. Front orientation. Tool Tether Attachments. Tape-On Attachment.
    Image of Attribute. Front orientation. Contains Annotated.

    Attachment

    Tape-on attachments work for almost any tool. Use them on screwdrivers, pliers, and other hand tools. Loop the webbing with a D-ring around your tool, cinch it tight, and secure with tape (sold separately). The flexible tape molds to surfaces of different shapes and sizes.
    ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.
    Tool Tether Attachments
    Tool Tether
    Attachment Tape
    Wt. Cap.,
    lb.
    Ring Inside
    Wd.
    Ring Inside
    Lg.
    For No.
    of Tools
    Material
    Construction
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Each
    Rigid Ring
    51"0.94"1Nylon
    		WebbingANSI/ISEA 121300000000000000000000000000
    101"0.94"1Nylon
    		WebbingANSI/ISEA 1213000000000000000000000000
    151"0.94"1Nylon
    		WebbingANSI/ISEA 121100000000000000000000000
     
    Swivel Ring
    50.55"0.45"1Nylon
    		WebbingANSI/ISEA 1213000000000000000000000000
    150.53"0.54"1Nylon
    		WebbingANSI/ISEA 1213000000000000000000000000
     

    Drop-Through Fall-Arrest Anchors

    Anchor your fall-arrest lanyard to overhead grating, girders, and other stable structures. These anchors give you a secure, stable way to clip in without being permanent. Slip these anchors through a hole and the plate on the end catches firmly. When the job’s done, pull the anchor out and use it again. Polyurethane tubing near the plate protects the anchor from abrasion. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.
    Drop Through
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Drop-Through Fall-Arrest Anchors.
    Image of Product. Front orientation. Fall-Arrest Anchors. Drop-Through Fall-Arrest Anchors.
    Plate
    Cable
    For Mounting
    Hole Dia.
    Material
    Dia.
    Thk.
    Material
    Construction
    Material
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Choose a Cable
    Length, ft.
    Each
    1 3/4" to 2"Steel4"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		000000000000000
    1 3/4" to 3"Steel6"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		00000000000000
    1 3/4" to 6"Steel12"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		00000000000000
     

    Roof Fall-Arrest Anchors

    Safely clip into these anchors for maintenance, inspection, or construction jobs on your roof. When used together with a lanyard and harness, they help you meet OSHA and ANSI safety standards. Attach them to wood and metal roofs, whether flat or sloped. Made of zinc-plated or powder-coated steel, they withstand moisture, rain, and other outdoor elements.
    Nail On
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Roof Fall-Arrest Anchors, Nail On, Style A.

    Style A

    Max. No. of
    Simultaneous Users
    Nail-On
    Mounting
    No. of
    Connections
    For Fall
    Restraint
    For Fall
    Arrest
    Material
    Fasteners
    Included
    Connection
    Hardware
    No. of
    Holes
    Hole
    Dia.
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style A
    111Zinc-Plated SteelYesD-Ring3211/64"5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     
    Nail On, Bolt On
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Roof Fall-Arrest Anchors, Nail On, Bolt On, Style B.

    Style B

    Style B—Style B anchors are more versatile than Style A anchors—you can even attach them to concrete. Clip your lanyard to any of the four sides for freedom of movement.
    Max. No. of
    Simultaneous Users
    Nail-On
    Mounting
    Bolt-On
    Mounting
    No. of
    Connections
    For Fall
    Restraint
    For Fall
    Arrest
    Material
    Color
    Fasteners
    Included
    Connection
    Hardware
    No. of
    Holes
    Hole
    Dia.
    No. of
    Holes
    Hole
    Dia.
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style B
    421Powder-Coated SteelRedNoD-Ring2023/64"41/2"5,000420ANSI/ISEA 125, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     

    Fall-Rescue Packs

    Image of ProductInUse. Side1 orientation. Contains Annotated. Fall-Rescue Packs.
    Image of Product. Front orientation. Fall-Rescue Packs.
    Clip these lightweight packs onto your fall-arrest harness so you can lower yourself to safety after a fall. They have a D-ring where you can attach your fall-arrest lanyard and 50 ft. of rope coiled inside. If you’re left hanging after a fall, pull the red tab on the shoulder and the pack will gradually release the rope for a controlled descent to the ground. A complete fall-arrest system includes a lanyard, harness, and anchor. When used together with a fall-arrest system, these packs meet OSHA and ANSI safety standards.
    Rope
    Material
    D-Ring Location
    (No. of)
    Lg.,
    ft.
    Material
    Construction
    Wt. Cap.,
    lb.
    Specs. Met
    Features
    Each
    Nylon
    		Back (1)50Aramid FabricBraided310ANSI/ASSP Z359.9, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502RFID Tag0000000000000000
    Rescue Poles
    Image of Product. Front orientation. Retrievers.
    Use rescue poles to assist a teammate who’s injured or unconscious. They come with a carabiner and a rope, so you can hook the tab on their pack, pull it, and lower them to the ground.
    Rope
    Carabiner
    Extended
    Lg., ft.
    Retracted
    Lg., ft.
    Material
    Lg.,
    ft.
    Material
    Construction
    Opening
    Wd.
    Material
    Wt. Cap.,
    lb.
    Includes
    Each
    102Aluminum
    		12Polypropylene
    		Braided13/16"Aluminum
    		310Carabiner, Carrying Case with RFID Tag, Rope00000000000000

    Fall-Rescue Kits

    Image of ProductInUse. Ascent Rescue. Side1 orientation. Contains Annotated. Fall-Rescue Kits. Ascent Rescue.
    Image of ProductInUse. Descent Rescue. Side1 orientation. Contains Annotated. Fall-Rescue Kits. Descent Rescue.

    Ascent Rescue

    Descent Rescue

    Image of Product. Ascent Rescue Kit. Front orientation. Fall-Rescue Kits. Ascent Rescue.
    Image of Product. Descent Rescue Kits. Front orientation. Fall-Rescue Kits. Descent Rescue.

    Ascent Rescue Kit

    Descent Rescue Kits

    Everything you need to rescue a person who is suspended after a fall, even if they're injured or unconscious. These kits come tucked in a storage bag, so you can spring into action at a moment’s notice. The storage bag repels water for protection from the weather.
    These are not fall-arrest equipment. For a fall-arrest system, you’ll need a lanyard, harness, and anchor.
    Ascent Rescue—Use ascent rescue kits to lift the suspended person back to a stable location, such as an elevated platform. These kits are ideal when the ground is too far to safely lower someone, or obstacles are in the way.
    Descent Rescue—Use descent rescue kits to lower the suspended person to the ground. They include a pole that telescopes for extra reach with a carabiner holder and hook on the end. Use the pole to do a variety of things—install anchors, attach carabiners to a suspended person’s D-ring, or guide someone around obstacles as they descend. You can even use these kits to evacuate yourself from an elevated platform in emergencies such as a fallen ladder or a fire. The pockets on the backpack are labeled, so you’ll be able to find what you need quickly.
    Application
    Includes
    Rope Lg.,
    ft.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Ascent RescueRatchet Assembly, Rescue Strap, Rope, Rope Clamp, Rope Protector, Storage Bag, Two Carabiners, Wire Rope Clamp10420—00000000000000
    Descent RescueBackpack, Long Rope, Rescue Pole, Rescue Pole Storage Bag, Rescue Strap, Rescue/Descent Device with Handwheel, Rope Protector, Tool Lanyard, Two Carabiners, Webbing Anchor Point150620ANSI/ASSP Z359.4, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000

    Tool Tether Anchors

    Image of ProductInUse. Front orientation. Tool Tether Anchors. Slide On.
    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound.
    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound with Extra-Wide D-Ring.

    Slide On

    Wraparound

    Wraparound

    with

    Extra-Wide

    D-Ring

    Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.
    Slide On—Slide-on anchor points attach to your harness or tool belt. They’re a good choice for anchoring hand tools.
    Wraparound—Wraparound anchor points attach to rated structures such as railings and scaffolding. They support heavy tools without weighing you down.
    Wraparound with Extra-Wide D-Ring—Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards.
    Nylon Cover—A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.
    ANSI/ISEA 121—To ensure safety, they meet ANSI/ISEA 121 for design and performance.
    Wt. Cap.,
    lb.
    For No.
    of Tools
    Connection
    Hardware
    Material
    Cover
    Material
    Construction
    For Max.
    Dia.
    Specs. Met
    Each
    Slide On
    151D-RingNylon
    		—Webbing2 1/2"ANSI/ISEA 121000000000000
     
    Wraparound
    251D-RingPolyester Plastic—Webbing6"ANSI/ISEA 121000000000000
     
    Wraparound with Extra-Wide D-Ring
    505D-RingNylon
    		Nylon
    		Webbing6"ANSI/ISEA 121000000000000
     
    back to top