Prevent accidental start-ups while you service air preparation equipment. These lockout valves exhaust downstream pressure and can be locked in the shut-off position using a padlock. They help you comply with OSHA regulations for lockout/tagout procedures.

Joiner clamps (sold separately) connect these valves to another Festo modular unit with the same series number. They create compact, airtight connections that are easy to swap out. These clamps come with mounting brackets to attach the valve to a wall or equipment.

Keep your Norgren air preparation equipment from starting up during maintenance. When these valves are in their shut-off position, they block incoming air and exhaust downstream pressure. You can use a padlock (not included) to lock them closed. These valves help you comply with OSHA regulations for lockout/tagout procedures.

Joiner clamps (sold separately) connect these valves to another Norgren modular component with the same series number. They create compact, airtight connections that are easy to swap out. These clamps come with mounting brackets to attach the valve to a wall or equipment.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them. They come with mounting brackets.

Keep air preparation equipment from starting up during maintenance. In their shut-off position, these valves block incoming air and exhaust downstream pressure. You can also lock them closed with a padlock (not included). These valves help you comply with OSHA regulations for lockout/tagout procedures.

Joiner clamps (sold separately) connect these valves to another ARO modular unit with the same series number. They create compact, airtight connections that are easy to swap out. These clamps come with mounting brackets to attach the valve to a wall or equipment.

Keep your air preparation equipment from turning on during maintenance. In their shut-off position, these valves block incoming air and exhaust downstream pressure. You can also lock them closed with a padlock (not included). These valves help you comply with OSHA regulations for lockout/tagout procedures.

Joiner clamps (sold separately) connect these valves to another Aventics modular unit with the same series number. They create compact, airtight connections that are easy to swap out. These clamps come with mounting brackets to attach the valve to a wall or equipment.

Keep your air preparation equipment from starting up during maintenance. When these valves are in their shut-off position, they block incoming air and exhaust downstream pressure. You can use a padlock (not included) to lock them closed. These valves help you comply with OSHA regulations for lockout/tagout procedures.

Joiner clamps (sold separately) connect these valves to another Parker modular component with the same series number. They create compact, airtight connections that are easy to swap out. These clamps come with mounting brackets to attach the valve to a wall or equipment.

Made up of a Parker filter, regulator, and lubricator, these FRLs provide clean, lubricated air at your required pressure. They connect to other Parker units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs. Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

FRLs with a safety lockout valve can be locked in the shut-off position to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Joiner clamps (sold separately) create compact, airtight connections between components. All include a wall-mounting bracket, except for clamps in the PY3 series.

Mounting brackets (sold separately) allow you to attach these FRLs to a wall or equipment.

Tamper-resistant padlockable covers (sold separately) clamp over the regulator knob to prevent unwanted pressure changes.

A padlock (not included) locks the handle of these valves in the shut-off position. When valves are closed, the exhaust port vents air pressure so you can disconnect air tools safely. They meet OSHA lockout requirements to maintain safety and control in a compressed air system.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve. When selecting between valves with the same port size, choose the valve with the higher flow coefficient to ensure it provides enough airflow to operate your system.

Valves that comply with OSHA 29 CFR 1910.147 meet standards for the control of energy sources that could injure workers.

The muffler on these valves reduces exhaust noise. A padlock (not included) locks the handle in the shut-off position to disconnect air tools safely. They comply with OSHA 29 CFR 1910.147 to maintain safety and control in a compressed air system.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve.

To prevent accidental start-up, these valves can be locked in their off position with a padlock. Also known as 3-way and 3/2 valves, they create one action, such as extending a cylinder. Valves direct airflow from the inlet to your equipment and exhaust return airflow to create motion. They're normally closed to block airflow until actuated. Return actuation is by hand, so they stay actuated and return to their starting position only when you move the actuator again. In the off position, they exhaust air pressure from the system, allowing equipment to reset so the action can be repeated. They help meet OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve.