Add numbers, abbreviations, and symbols to indicate specific hazards and the degree of hazard using these NFPA (National Fire Protection Association) signs.

The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.

The illustrations on these signs help workers identify hazards at a glance.

Similar to a Safety Data Sheet (SDS), these signs keep workers informed about chemical and gas usage, warnings, and treatment in the event of exposure.

Specify the exact chemical and source of exposure to be printed on these signs.

The illustrations on these signs help workers identify restricted areas at a glance.

These signs have the same message on all three sides. Place them where needed to clearly define and restrict access to areas of a facility, then collapse them when not in use.

Designate areas that require personal protective equipment such as safety glasses and earmuffs.

Use the included symbols to inform workers of all the personal protection equipment required.

The illustrations on these signs help you identify electrical hazards at a glance.

These large decals have a pebbled nonskid surface and an adhesive backing that sticks to most surfaces.

These signs can be read when viewed in a rearview mirror.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Stack these signs when not in use. They have the same message printed on all four sides to help prevent accidents around slippery floors.

Collapse these signs when not in use. They have the same message printed on all three sides to help prevent accidents around slippery floors.

The illustrations on these signs help workers identify confined areas at a glance.

Specify the printed message you'd like to appear under the header.

To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.

For spaces where you can’t mount to a wall, these signs stand on tables or floors to remind people to social distance or wear a mask, preventing the spread of illness. Fold flat to store.

Identify the presence of hazardous materials with D.O.T.-regulated numbers, symbols, and messages.

Guide pedestrian and vehicle traffic.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Make parking restrictions clear to drivers.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Engraved letters and beveled edges provide a polished look.

These signs project from the wall so the same message is viewable from multiple angles.

Directing people to first-aid stations, the bright color, clear picture, and text on these decals make them easy to notice and understand.

Remind workers how to lift and carry loads safely.

Communicate hand signals for directing crane operation.

Motivate employees to follow good work and safety practices.

These signs meet federal regulations for the visually impaired and help comply with the Americans with Disabilities Act (ADA) when installed properly.

Engraved letters and beveled edges provide a polished look.

Mount these signs perpendicular to the wall to view the same message on each side.

Use the included bracket to mount these signs perpendicular to a wall or ceiling. They meet UL 924 regulations for visibility.

Mount these signs perpendicular to the wall to view the same message on each side.

Mark emergency meeting spots with these highly visible signs.

Clearly mark areas of your facility with these signs.

These signs meet federal regulations for the visually impaired and help comply with the Americans with Disabilities Act (ADA) when installed properly.

Communicate smoking policies.

Mark the location of fire alarms, extinguishers, and other fire safety equipment, so you can find them quickly in an emergency.

Clearly label fire hydrants to show their flow rates, if they're out of service, or write your own message.

Identify hazards at a glance with the headers and illustrations on these labels.

Add hazard symbols to an existing label or use alone to communicate hazards at a glance.

The illustrations on these labels help workers identify flammable hazards and corrosive materials at a glance.

Alert workers to the presence of flammable materials.

Fill out these labels with codes that identify hazardous materials, then seal them with a clear plastic flap to protect the message.

Prevent health hazards resulting from exposure to chemicals using the UN classification.

The graphics on these labels identify hazardous materials and provide safety reminders.

The graphics on these labels identify areas that require personal protective equipment, such as safety goggles and boots.

Designate areas that require personal protective equipment such as safety glasses and ear plugs.

Mark objects with the best lifting points and procedures.

Add lockout symbols to an existing label or use alone to provide lockout reminders at a glance.

Stick these ISO symbols on existing labels or use them on their own to warn of vehicle hazards at a glance.

The headers and illustrations on these labels help workers identify electrical hazards at a glance.

Stick these symbols to terminals to show the location of grounded wires.

The illustrations on these labels help workers identify tripping hazards at a glance.

Identify dangerous areas to restrict access to authorized personnel.

Share warnings or safety instructions with drivers. The images on these labels help them understand the message at a glance.

The illustrations on these labels help workers identify restricted areas at a glance.

Identify confined spaces that require authorized entry.

Remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work.

Use these tags to describe equipment and lockout/tagout procedures.

Sign and date these tags and then seal the laminating flap to protect the text from smudging and wear.

Guide workers through a safety checklist before welding, grinding, cutting, or other work involving fire or sparks.

Communicate dangers to workers near equipment that could cause injury.

Write a message and then seal the laminating flap to protect the text from smudging and wear.

Push these tags through hasps on cabinets, truck trailers, cargo containers, and other heavy duty equipment. With an average breaking strength of 3,000 lbs., they are more secure than other tamper-seal tags.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

Seal valves, latches, containers, and other devices with these traceable, tamper-evident tags, which are designed for food, pharmaceutical, and other sanitary environments.

Thread the thin wire on these tags through small holes and around oddly shaped items.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

Create custom-length seal tags using locks and wire.

These tags are stamped with "SEALED" and a random number.