These vests meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 and ANSI/ISEA 107 standards for high visibility. They are rated ANSI Class 2 for working on or near roadways. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These vests are mesh acrylic and are self-extinguishing. They are stitched with Nomex thread for added durability. They have hook and loop closures down the front and one waist pocket.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. Black fabric on the lower half keeps jackets looking cleaner longer than all-yellow jackets. These jackets meet Class 3 ANSI/ISEA 107 standards for workers that need to be seen by traffic at a minimum distance of 1/4 of a mile. They have a zipper down the front.

Polyester provides the comfort of a moisture-wicking sweatshirt with the warmth of a jacket.

Polyurethane-coated polyester is water resistant to keep you dry in wet and rainy environments. These jackets have a storm flap to keep rain out, as well as a removable fleece liner for added warmth and comfort. The outer shell has an inside pocket to protect contents from the elements. A compartment in the collar allows you to roll up and conceal the hood.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. These pants meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 garment to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). Made of polyester fabric, these pants are lightweight and moisture wicking to keep you cool. They have an elastic waist, hip slits, and snaps on the cuffs.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these pants.

Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks. These pants have no pockets so they won’t trap hot particles. They have durable leather belt loops, as well as buttons for suspenders. Cuffs are open to fit over boots.

Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.

Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.

PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.

Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance. It provides protection against molten metal splashes.

Find your waist size by measuring just above the top of your hip bone. Pants are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the pants.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These jackets meet ANSI/ISEA 107 Class 3 standards for workers in high-risk areas that need to be seen by traffic at a minimum distance of 1/4 of a mile. They are polyester to keep you dry in wet and rainy conditions. These jackets have a zipper down the front with a storm flap to keep rain out. They have hook and loop closures on the cuffs to modify the fit and two waist pockets.

Women’s jackets have a contoured fit. Fold them into their own hood or lower front pocket and zip them closed to pack them away. They have an adjustable elastic hem—cinch the toggle piece to tighten it and keep out rain at the bottom. To cool off while remaining dry, unzip the underarm vents.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These overalls meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 vest, shirt, or jacket to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). They are polyamide-coated polyester to keep you dry in wet and rainy conditions. They have snaps on the cuffs, adjustable suspenders to modify the length, and a hook and loop chest pocket.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Bright colors and reflective stripes make it easy to spot workers in low-visibility areas. These jackets protect against flames and welding sparks. They snap closed and have one inside pocket.

These jackets are also treated to protect against low radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

These flexible gloves combine abrasion resistance with a design that conforms to your hand for improved dexterity. They all have a reflective backing that makes them easy to spot.

Safeguard hands from cold objects as well as cold weather. These gloves are pigskin leather with a fluorescent orange nylon back and reflective tape on the knuckles that makes them easy to spot.

Use gloves with knit cuffs for a secure fit. Gloves with open cuffs are more convenient to put on and take off than other gloves.

A leather palm provides abrasion resistance. These gloves have fluorescent stripes and reflective tape on the cuff and knuckles that makes them easy to spot. They are lightweight and breathable.

The coating on these gloves provides extra grip and protection without limiting dexterity. They provide light abrasion resistance and have a fluorescent yellow back side that makes them easy to spot.

Guards on the knuckles and foam padding on the palm protect your hands from impact. These abrasion-resistant gloves conform to your hand for improved dexterity. Their reflective backing makes them easy to spot.

Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.

Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.

Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.

PBI/Kevlar aramid blend is a strong, lighter weight fabric that offers good heat resistance without the bulk of other Kevlar blends.

Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance. It provides protection against molten metal splashes.

These vests are fluorescent yellow with reflective tape panels to make workers stand out in low-visibility conditions. They meet Class 2 ANSI/ISEA 107 standards for high-visibility clothing when working on or near roadways, and they are United States Coast Guard Type III approved for use near calm, inland waters where there is a high chance of immediate rescue. The lining is polyester mesh, making vests lightweight and breathable. They have a zipper down the front and two adjustable buckles to tighten for a snug fit. They also have two pockets with hook and loop closures.

Life vests should fit snugly. When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the vest.