Shoes that cannot be sold outside of the United States are restricted due to product regulations.

Protect your feet from chemical spills and splashes. All boots are water resistant.

PVC/polyurethane blend has excellent resistance against inorganic and mineral acids. It also resists oils and grease. Neoprene has excellent resistance against alkalies and is softer than PVC/polyurethane.

6" high boots cover the ankle. 12" high boots are mid-calf boots. 15" and 16" high boots are knee high.

Boots with a safety toe meet ASTM F2413 standards for protection against impact and compression.

Style A are made from a PVC/polyurethane blend and have excellent resistance to acids, oil, and grease. A steel-reinforced toe adds safety. A shank provides arch support by distributing weight during strenuous work, such as climbing ladders.

Style B are made from neoprene, they have excellent resistance against alkalies. Boots with a safety toe are reinforced with steel for protection.

Style C provide knee-high coverage. Made from a PVC/polyurethane blend, they have excellent resistance to acids, oil, and grease. For added protection, boots with a safety toe are reinforced with steel. Boots with a shank offer arch support by distributing weight during strenuous work, such as climbing ladders. Boots with a reinforced midsole protect against punctures when working around sharp objects, such as glass, nails, and scrap metal.

Style D boots are a PVC/polyurethane blend and provide knee-high coverage against acids, oil, and grease. They have a safety toe reinforced with steel for extra protection. For added arch support, a shank distributes weight during strenuous work, such as climbing ladders.

Wear these guards over shoes or boots to shield toes and feet from accidental impact.

Plastic guards are lightweight for protection against minor bumps and impacts up to 30 ft.-lbs. Steel and aluminum guards meet ASTM F2413 for protection against accidental impact and compression up to 75 ft.-lbs.

Order your normal shoe size. For large work shoes, order one size up. Guards with a foot strap and snaps are designed to fit over large work shoes or boots, so order your normal shoe size.

These covers are ASTM F2413 rated and tested to 20,000 volts AC for protection against electrical hazards. They are made of water-resistant dielectric rubber with a fabric lining for easy removal. A skid-resistant sole grips wet and slippery surfaces for good traction. They have a deep-cut heel that locks onto ladder rungs or stair edges to stabilize the wearer when climbing.

Order your normal shoe size unless wearing over large work shoes, then order one size up.

These covers are ASTM F2413 rated and tested to 20,000 volts AC for protection against electrical hazards. They are knee high and made of water-resistant dielectric rubber with a fabric lining for easy removal. A skid-resistant sole grips wet and slippery surfaces for good traction. They have a deep-cut heel that locks onto ladder rungs or stair edges to stabilize the wearer when climbing. Tighten the top using the adjustable strap.

Order your normal boot size unless wearing over large work boots, then order one size up.

Studs dig in and hold tight on icy surfaces.

Ice grippers with heel coverage leave the front of shoes bare, so users can climb ladders safely and operate machinery without damaging the pedals. The adjustable strap secures these grippers to shoes. They have four steel studs on each foot.

Ice grippers with full shoe coverage have studs on the toe and heel to give wearers complete traction for walking.

Slip-on grippers are made of flexible rubber or plastic that stretches to fit over shoes. They have six steel studs or eight tungsten carbide studs on each foot. Grippers with tungsten carbide studs are more durable and harder to dull than those with steel studs. They also give you more stability because they have a greater number of studs. If one of the studs breaks or goes missing, there’s a replacement stud built into the upper toe area for a quick swap. To help you handle thick snow conditions, these grippers have treaded soles for extra traction. They remain elastic even in cold temperatures, so you can stretch them over shoes using their pull tabs without cracking or breaking them.

Grippers with hook and loop straps provide a snug fit over shoes or bulky boots. They have 15 steel studs on each foot to provide better traction than slip-on grippers. Studs are replaceable.

When ordering ice grippers, order your normal shoe size.

These waders go up to your chest to keep you dry in deep water, mud, and sludge. They are PVC, so they resist oil. These waders have adjustable suspenders to modify the fit. All waders fit over socks. They have a safety toe and meet ASTM F2413 standards for protection against impact and compression.

Waders with a reinforced midsole protect against punctures when working around sharp objects, such as glass, nails, and scrap metal.

Inner and outer seam lengths are approximate. The outer seam length is measured from the bottom of the heel to the top of the wader.