Also known as interlock switches, these ensure the safety of personnel by automatically shutting off power to machinery when an access door opens. They’re often used with machine guards.

Shorter and thinner than other safety limit switches, these are sized to fit tight spaces.

Rated NEMA 3S and IP69K, these switches can handle washdowns with high pressures and temperatures. They’re also protected from oil/coolant spraying, precipitation, and temporary submersion.

These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.

These switches use DC input voltage and produce PNP or NPN signal output. They're often used with programmable logic controllers (PLCs).

These switches have a longer sensing distance compared to other proximity switches with the same diameter.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

Rated NEMA 4X, 6P, IP68 and IP69K, these switches resist corrosion and high-pressure, high-temperature washdowns, and can withstand temporary submersion.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems.

A quick push is all it takes to actuate these switches.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

Immediately cut power with a single push.

Save space on a panel by using one switch to perform multiple switching functions.

Push the button to actuate these switches. Colored actuators help you tell switches apart without reading labels.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.

Choose an actuator and contact block to make your own 16 mm switch.

An infrared light beam senses the lightest finger contact to switch a circuit on or off.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

Step on these switches for hands-free actuation in an area with frequent washdowns.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking.