Also known as interlock switches, these ensure the safety of personnel by automatically shutting off power to machinery when an access door opens. They’re often used with machine guards.

Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.

When a moving object contacts the actuator on these switches, they open or close a circuit. They have the rapid-closing action of a snap-acting switch, but with a larger actuator for large objects.

Rugged enough for mining operations, these limit switches require a high actuation force, like heavy rocks moving on a conveyor.

A sealed actuator prevents these switches from jamming, even when exposed to sand, mud, or dirt. With a slim design, you can stack them together or fit them in tight spaces.

Safely open or close a circuit near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material.

These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.

These switches use DC input voltage and produce PNP or NPN signal output. They're often used with programmable logic controllers (PLCs).

These switches have a longer sensing distance compared to other proximity switches with the same diameter.

Detect objects as thin as a freshly sharpened pencil tip. These switches are best for tight spaces because they have a smaller light beam and can detect smaller objects than standard photoelectric switches.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

Rated NEMA 4X, 6P, IP68 and IP69K, these switches resist corrosion and high-pressure, high-temperature washdowns, and can withstand temporary submersion.

Immediately cut power by pulling the cable.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems.

Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

A base that lights up draws attention to emergency stops. When pushed, these switches immediately cut power.

Simple to use, these switches actuate with a quick push.

A housing seals in anything that could ignite flammable material, so you can use these switches where explosive gas, dust, and fibers may be. They actuate with a quick push.

Immediately cut power with a single push.

Save space on a panel by using one switch to perform multiple switching functions.

Push the button to actuate these switches. Colored actuators help you tell switches apart without reading labels.

Actuate these switches with the push of a button. Their buttons are distinct colors to help you quickly spot switches without labels.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 16 mm switch.

Grip and twist a lever to turn these switches on or off—they’re designed to prevent accidental actuation. Install them into standard-sized panel cutouts.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

Use these switches where ignitable gas, dust, and fibers may be present. They're UL and C-UL listed for hazardous locations.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Step on these switches for hands-free actuation in an area with frequent washdowns.

With a slim shape, these switches fit comfortably in your hand.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present.

Trigger a light, alarm, or other device to signal your door is unlocked.

Trigger a light, alarm, or other device to signal your door is unlocked.