A base that lights up draws attention to emergency stops. When pushed, these switches immediately cut power.

Simple to use, these switches actuate with a quick push.

Immediately cut power with a single push.

Rated NEC Classes I, II, and III, these switches have a housing that keeps fire and sparks in, so they won’t ignite gases, vapors, or dust. To save space on your panel, they can control multiple circuits.

Change the cover on these switches without replacing them entirely—they come with seven snap-on covers in different colors. The colors help you quickly identify switches without labels.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.

Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.

Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.

Immediately cut power by pulling the cable.

It takes two hands to activate these switches, minimizing the risk of accidental equipment start up.

Choose an actuator and contact block to make your own 22 mm metal switch.

Choose an actuator and contact block to make your own 22 mm plastic switch.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Made for areas where ignitable gas and vapor may be present, these switches have a housing that seals in anything that could spark flammable material.

The enclosure not only protects these switches, but also adds options for how you install them.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

Activate or deactivate fans, lights, and other devices inside your enclosure when you open or close the door.

These switches withstand temporary submersion.

Turn these switches by hand.