McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    756 Products

    Performance

    Performance

    Certificate Type

    Same-Size Thread Stainless Steel Hex-Drive Shoulder Screws

    Image of Product. Front orientation. Shoulder Screws. Same-Size Thread Stainless Steel Hex-Drive Shoulder Screws.
    Harness superior holding power with screws that also won't rust. Threads that match the shoulder diameter create a tighter hold than screws with a standard thread diameter. Use them in thicker materials and larger holes. While more corrosion resistant than alloy steel screws, they're not as strong.
    Check out our Made-to-Order Same-Size Thread Stainless Steel Hex-Drive Shoulder Screws if you don't see the shoulder length you need.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They won't rust in wet and outdoor environments, but they won't hold up to the harsh chemicals that 316 stainless steel can.
    Head
    Each
    Shoulder
    Lg.
    Thread Size
    Thread
    Lg.
    Dia.
    Ht.
    Drive
    Size
    Tensile Strength,
    psi
    Material Certificate
    Form
    1-4
    5-Up
    18-8 Stainless Steel
     
    1/8" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/8"5-40
    		5/32"1/4"1/8"5/64"70,000—0000000000000000000
    3/16"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    1/4"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    5/16"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    3/8"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    1/2"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    5/8"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    3/4"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    1"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
     
    3/16" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/8"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/8"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/16"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/16"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/4"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/4"10-32
    		3/16"5/16"5/32"3/32"70,000Digital
    		00000000000000000
    5/16"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    5/16"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/8"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/8"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/2"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/2"10-32
    		3/16"5/16"5/32"3/32"70,000Digital
    		00000000000000000
    5/8"10-24
    		3/16"5/16"5/32"3/32"70,000Digital
    		00000000000000000
    5/8"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/4"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/4"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1 1/4"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1 1/4"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1 1/2"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1 1/2"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1 3/4"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1 3/4"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    2"10-24
    		3/16"5/16"5/32"3/32"70,000Digital
    		000000000000000000
    2"10-32
    		3/16"5/16"5/32"3/32"70,000—000000000000000000
    2 1/2"10-24
    		3/16"5/16"5/32"3/32"70,000—000000000000000000
    2 1/2"10-32
    		3/16"5/16"5/32"3/32"70,000—000000000000000000
     
    1/4" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/8"1/4"-20
    		3/8"3/8"3/16"1/8"70,000Digital
    		00000000000000000
    1/8"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000Digital
    		00000000000000000
    1/4"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    5/16"1/4"-20
    		3/8"3/8"3/16"1/8"70,000Digital
    		00000000000000000
    5/16"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    3/8"1/4"-20
    		3/8"3/8"3/16"1/8"70,000Digital
    		00000000000000000
    3/8"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1/2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1/2"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    5/8"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    5/8"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    3/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000Digital
    		00000000000000000
    3/4"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1"1/4"-20
    		3/8"3/8"3/16"1/8"70,000Digital
    		00000000000000000
    1"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1 1/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1 1/4"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1 1/2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1 1/2"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1 3/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    2"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    2 1/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    2 1/2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    2 3/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
    3"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
    3 1/2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
    4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
     
    5/16" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000Digital
    		00000000000000000
    1/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/8"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/8"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1/2"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    5/8"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    5/8"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1 1/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1 1/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1 1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—000000000000000000
    1 1/2"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—000000000000000000
    1 3/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—000000000000000000
    1 3/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—000000000000000000
    2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2 1/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2 1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2 3/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    3"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    3 1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    4 1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
     
    3/8" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/8"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    1/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    1/4"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    5/16"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    3/8"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    3/8"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000Digital
    		00000000000000000
    1/2"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    5/8"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    5/8"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    3/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    3/4"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    1"3/8"-16
    		1/2"9/16"1/4"3/16"70,000Digital
    		000000000000000000
    1"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—000000000000000000
    1 1/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000Digital
    		000000000000000000
    1 1/4"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—000000000000000000
    1 1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    1 1/2"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    1 3/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000Digital
    		0000000000000000000
    1 3/4"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000Digital
    		0000000000000000000
    2"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2 1/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2 1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2 3/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    3"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    3 1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    5"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    6"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
     
    1/2" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—000000000000000000
    5/16"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—00000000000000000
    3/8"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—00000000000000000
    1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—00000000000000000
    5/8"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—000000000000000000
    3/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—000000000000000000
    1"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    1 1/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    1 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    1 3/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    2 1/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000Digital
    		0000000000000000000
    2 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    2 3/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    3"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    3 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    4 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    5"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    6"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
     
    5/8" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    5/16"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—00000000000000000
    3/8"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—00000000000000000
    1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—000000000000000000
    5/8"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—000000000000000000
    3/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    7/8"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1 1/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1 3/8"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1 3/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2 1/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2 3/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    3"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    3 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    4 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000Digital
    		0000000000000000000
    6"5/8"-11
    		3/4"7/8"3/8"5/16"70,000Digital
    		0000000000000000000
     
    3/4" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    3/4"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    1"3/4"-10
    		7/8"1"1/2"3/8"70,000Digital
    		0000000000000000000
    1 1/4"3/4"-10
    		7/8"1"1/2"3/8"70,000Digital
    		0000000000000000000
    1 1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    1 3/4"3/4"-10
    		7/8"1"1/2"3/8"70,000Digital
    		0000000000000000000
    2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    2 1/4"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    2 1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    2 3/4"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    3"3/4"-10
    		7/8"1"1/2"3/8"70,000Digital
    		0000000000000000000
    3 1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000Digital
    		0000000000000000000
    4 1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000Digital
    		0000000000000000000
    5"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
     
    1" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1"1"-8
    		1"1 5/16"5/8"1/2"70,000—0000000000000000000
    1 1/2"1"-8
    		1"1 5/16"5/8"1/2"70,000—0000000000000000000
    2"1"-8
    		1"1 5/16"5/8"1/2"70,000—0000000000000000000
    2 1/2"1"-8
    		1"1 5/16"5/8"1/2"70,000Digital
    		0000000000000000000
    3"1"-8
    		1"1 5/16"5/8"1/2"70,000Digital
    		0000000000000000000
    5"1"-8
    		1"1 5/16"5/8"1/2"70,000—0000000000000000000
     
    3 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000Digital
    		00000000000000000
    5 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    6 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000Digital
    		00000000000000000
    7 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    8 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000Digital
    		00000000000000000
    9 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    10 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    11 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    12 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    13 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    14 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    15 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    16 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000Digital
    		00000000000000000
    17 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    18 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    19 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    20 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    21 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    22 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—000000000000000000
    23 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—000000000000000000
    24 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—000000000000000000
    25 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—0000000000000000000
    30 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000Digital
    		0000000000000000000
    35 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—0000000000000000000
    40 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—0000000000000000000
    45 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—0000000000000000000
    50 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000Digital
    		0000000000000000000
    55 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000Digital
    		0000000000000000000
     
    4 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
    5 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
    6 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
    7 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    8 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    9 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    10 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
    12 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
    14 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
    16 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
    18 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    20 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    25 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    30 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    35 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—0000000000000000000
    40 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		0000000000000000000
    45 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—0000000000000000000
    60 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—0000000000000000000
    70 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—0000000000000000000
     
    5 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    5 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    6 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    8 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    10 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000Digital
    		00000000000000000
    12 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    14 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    16 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    18 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    20 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    25 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    30 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    35 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—000000000000000000
    40 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—0000000000000000000
    45 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—0000000000000000000
    50 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—0000000000000000000
     
    6 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000Digital
    		00000000000000000
    5 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    6 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    8 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    10 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    12 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    14 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    16 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    18 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    20 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    25 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    30 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    35 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    40 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—000000000000000000
    45 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—000000000000000000
    50 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—000000000000000000
    60 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—0000000000000000000
    70 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—0000000000000000000
     
    8 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    5 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    6 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    8 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    10 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    12 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    14 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    16 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    18 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000Digital
    		000000000000000000
    20 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    25 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    30 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—000000000000000000
    35 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—000000000000000000
    40 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—000000000000000000
    45 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—000000000000000000
    50 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—0000000000000000000
    60 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—0000000000000000000
    70 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—0000000000000000000
     
    10 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    6 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    8 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    10 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    12 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    14 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    16 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    18 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—000000000000000000
    20 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—00000000000000000
    25 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—000000000000000000
    30 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    35 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    40 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    45 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    50 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    60 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000Digital
    		0000000000000000000
    70 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    90 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000Digital
    		0000000000000000000
     
    12 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    8 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—00000000000000000
    10 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000Digital
    		00000000000000000
    12 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—000000000000000000
    16 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—000000000000000000
    20 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    25 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000Digital
    		0000000000000000000
    30 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    35 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    40 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    45 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    50 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    60 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    80 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    90 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000Digital
    		0000000000000000000
    120 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000Digital
    		0000000000000000000
     
    16 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    20 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000—0000000000000000000
    25 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000Digital
    		0000000000000000000
    30 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000—0000000000000000000
    35 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000—0000000000000000000
    40 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000Digital
    		0000000000000000000
    45 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000—0000000000000000000
    50 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000—0000000000000000000
    60 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000Digital
    		0000000000000000000
    120 mmM16 × 2 mm22 mm24 mm11 mm8 mm70,000—00000000000000000000
     
    20 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    15 mmM20 × 2.5 mm27 mm30 mm14 mm10 mm70,000—0000000000000000000
    20 mmM20 × 2.5 mm27 mm30 mm14 mm10 mm70,000Digital
    		0000000000000000000
    25 mmM20 × 2.5 mm27 mm30 mm14 mm10 mm70,000—0000000000000000000
    45 mmM20 × 2.5 mm27 mm30 mm14 mm10 mm70,000—0000000000000000000
    55 mmM20 × 2.5 mm27 mm30 mm14 mm10 mm70,000—0000000000000000000
    70 mmM20 × 2.5 mm27 mm30 mm14 mm10 mm70,000Digital
    		0000000000000000000
    110 mmM20 × 2.5 mm27 mm30 mm14 mm10 mm70,000—000000000000000000000
     
    Black-Oxide 18-8 Stainless Steel
     
    1/8" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    3/16"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    1/4"5-40
    		5/32"1/4"1/8"5/64"70,000Digital
    		00000000000000000
    3/8"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    1/2"5-40
    		5/32"1/4"1/8"5/64"70,000Digital
    		00000000000000000
    5/8"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
    1"5-40
    		5/32"1/4"1/8"5/64"70,000—00000000000000000
     
    3/16" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    3/16"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/4"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/4"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    5/16"10-24
    		3/16"5/16"5/32"3/32"70,000Digital
    		00000000000000000
    5/16"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/8"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/8"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/2"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1/2"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    5/8"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    5/8"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/4"10-24
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    3/4"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1"10-32
    		3/16"5/16"5/32"3/32"70,000—00000000000000000
    1 1/4"10-32
    		3/16"5/16"5/32"3/32"70,000Digital
    		00000000000000000
    1 1/2"10-24
    		3/16"5/16"5/32"3/32"70,000—000000000000000000
    1 1/2"10-32
    		3/16"5/16"5/32"3/32"70,000—000000000000000000
    1 3/4"10-24
    		3/16"5/16"5/32"3/32"70,000—000000000000000000
    2"10-24
    		3/16"5/16"5/32"3/32"70,000Digital
    		000000000000000000
     
    1/4" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1/4"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    5/16"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    5/16"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    3/8"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    3/8"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1/2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1/2"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    5/8"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    5/8"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    3/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    3/4"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1"1/4"-28
    		3/8"3/8"3/16"1/8"70,000Digital
    		00000000000000000
    1 1/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1 1/4"1/4"-28
    		3/8"3/8"3/16"1/8"70,000—00000000000000000
    1 1/2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    1 3/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—000000000000000000
    2 1/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
    2 1/2"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
    2 3/4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
    3"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
    4"1/4"-20
    		3/8"3/8"3/16"1/8"70,000—0000000000000000000
     
    5/16" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    1/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/8"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/8"5/16"-24
    		7/16"7/16"7/32"5/32"70,000Digital
    		00000000000000000
    1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000Digital
    		00000000000000000
    1/2"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    5/8"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    5/8"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—00000000000000000
    3/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000Digital
    		00000000000000000
    1"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—000000000000000000
    1"5/16"-24
    		7/16"7/16"7/32"5/32"70,000Digital
    		000000000000000000
    1 1/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—000000000000000000
    1 1/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000Digital
    		000000000000000000
    1 1/2"5/16"-24
    		7/16"7/16"7/32"5/32"70,000Digital
    		000000000000000000
    1 3/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    1 3/4"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2"5/16"-24
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2 1/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2 1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    2 3/4"5/16"-18
    		7/16"7/16"7/32"5/32"70,000Digital
    		0000000000000000000
    3"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
    3 1/2"5/16"-18
    		7/16"7/16"7/32"5/32"70,000—0000000000000000000
     
    3/8" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    5/16"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    5/16"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    3/8"3/8"-16
    		1/2"9/16"1/4"3/16"70,000Digital
    		00000000000000000
    3/8"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    1/2"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    5/8"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    5/8"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—00000000000000000
    3/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—000000000000000000
    3/4"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—000000000000000000
    1"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—000000000000000000
    1"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—000000000000000000
    1 1/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    1 1/4"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    1 1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    1 3/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2"3/8"-24
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2 1/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000Digital
    		0000000000000000000
    2 1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    2 3/4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    3"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    3 1/2"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
    4"3/8"-16
    		1/2"9/16"1/4"3/16"70,000—0000000000000000000
     
    1/2" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    5/16"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—00000000000000000
    1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—000000000000000000
    5/8"1/2"-13
    		5/8"3/4"5/16"1/4"70,000Digital
    		000000000000000000
    3/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    1"1/2"-13
    		5/8"3/4"5/16"1/4"70,000Digital
    		0000000000000000000
    1 1/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    1 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    1 3/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000Digital
    		0000000000000000000
    2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    2 1/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    2 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    2 3/4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    3"1/2"-13
    		5/8"3/4"5/16"1/4"70,000Digital
    		0000000000000000000
    3 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    4"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    5"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
    6"1/2"-13
    		5/8"3/4"5/16"1/4"70,000—0000000000000000000
     
    5/8" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000Digital
    		000000000000000000
    5/8"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    3/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1 1/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    1 3/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2 1/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    2 3/4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000Digital
    		0000000000000000000
    3 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    4"5/8"-11
    		3/4"7/8"3/8"5/16"70,000—0000000000000000000
    4 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000Digital
    		0000000000000000000
    5"5/8"-11
    		3/4"7/8"3/8"5/16"70,000Digital
    		0000000000000000000
    5 1/2"5/8"-11
    		3/4"7/8"3/8"5/16"70,000Digital
    		0000000000000000000
     
    3/4" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    5/8"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    1"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    1 1/4"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    1 1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    1 3/4"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    2 1/4"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    2 1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    2 3/4"3/4"-10
    		7/8"1"1/2"3/8"70,000Digital
    		0000000000000000000
    3"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    3 1/2"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
    4"3/4"-10
    		7/8"1"1/2"3/8"70,000—0000000000000000000
     
    1" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1"1"-8
    		1"1 5/16"5/8"1/2"70,000—0000000000000000000
    1 1/2"1"-8
    		1"1 5/16"5/8"1/2"70,000—0000000000000000000
    1 3/4"1"-8
    		1"1 5/16"5/8"1/2"70,000Digital
    		0000000000000000000
    3"1"-8
    		1"1 5/16"5/8"1/2"70,000Digital
    		0000000000000000000
     
    3 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    5 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    6 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    8 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    10 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    12 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
    16 mmM3 × 0.5 mm4 mm5 mm2 mm2 mm70,000—00000000000000000
     
    4 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    5 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    6 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    8 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    10 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    12 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    16 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    20 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    25 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000—00000000000000000
    30 mmM4 × 0.7 mm4.5 mm6 mm3 mm2 mm70,000Digital
    		00000000000000000
     
    5 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    5 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    6 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    8 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    10 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    12 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    16 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    20 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    25 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
    30 mmM5 × 0.8 mm9.5 mm9 mm4 mm2.5 mm70,000—00000000000000000
     
    6 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    4 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    5 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    6 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    8 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    10 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    12 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    20 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    25 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    30 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—00000000000000000
    35 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—000000000000000000
    40 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—000000000000000000
    45 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000Digital
    		000000000000000000
    50 mmM6 × 1 mm11 mm10 mm4.5 mm3 mm70,000—0000000000000000000
     
    8 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    8 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    12 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    16 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000Digital
    		00000000000000000
    20 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—00000000000000000
    25 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000Digital
    		000000000000000000
    30 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—000000000000000000
    35 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—000000000000000000
    40 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000Digital
    		0000000000000000000
    45 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—0000000000000000000
    50 mmM8 × 1.25 mm13 mm13 mm5.5 mm4 mm70,000—0000000000000000000
     
    10 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    20 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—000000000000000000
    25 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    30 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000Digital
    		0000000000000000000
    35 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    40 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
    45 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000Digital
    		0000000000000000000
    50 mmM10 × 1.5 mm16 mm16 mm7 mm5 mm70,000—0000000000000000000
     
    12 mm Diameter Shoulder (-0.04 mm to -0.01 mm Tolerance)
    6 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—00000000000000000
    16 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    20 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000Digital
    		0000000000000000000
    30 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    35 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    40 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000—0000000000000000000
    45 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000Digital
    		0000000000000000000
    60 mmM12 × 1.75 mm18 mm18 mm9 mm6 mm70,000Digital
    		0000000000000000000
     
    Shoulder Shims
    Image of ProductInUse. Front orientation. Contains Annotated. Shims. Shoulder Shortening.

    Shoulder

    Shortening

    Image of Product. Front orientation. Shims.
    Shoulder Shortening—Pare down the shoulder on screws or tighten the screw's hold. Stack multiple shims to get the exact spacing you need.
    Shoulder Shortening
    Thk.
    For Screw
    Size
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    For 1/8" Diameter Shoulder
    0.005"No. 4
    		1000000000000000
    0.01"No. 4
    		100000000000000
    0.016"No. 4
    		100000000000000
    0.02"No. 4
    		100000000000000
    0.03"No. 4
    		100000000000000
    0.06"No. 4
    		50000000000000
     
    For 3/16" Diameter Shoulder
    0.005"No. 8
    		100000000000000
    0.01"No. 8
    		100000000000000
    0.016"No. 8
    		100000000000000
    0.02"No. 8
    		100000000000000
    0.03"No. 8
    		100000000000000
    0.06"No. 8
    		50000000000000
     
    For 1/4" Diameter Shoulder
    0.005"No. 10
    		500000000000000
    0.01"No. 10
    		10000000000000000
    0.016"No. 10
    		5000000000000000
    0.02"No. 10
    		5000000000000000
    0.03"No. 10
    		5000000000000000
    0.06"No. 10
    		250000000000000
     
    For 5/16" Diameter Shoulder
    0.005"1/4"
    		500000000000000
    0.01"1/4"
    		250000000000000
    0.016"1/4"
    		250000000000000
    0.02"1/4"
    		250000000000000
    0.03"1/4"
    		10000000000000000
    0.06"1/4"
    		250000000000000
     
    For 3/8" Diameter Shoulder
    0.005"5/16"
    		250000000000000
    0.01"5/16"
    		2500000000000000
    0.016"5/16"
    		2500000000000000
    0.02"5/16"
    		250000000000000
    0.03"5/16"
    		5000000000000000
    0.06"5/16"
    		250000000000000
     
    For 1/2" Diameter Shoulder
    0.005"3/8"
    		250000000000000
    0.01"3/8"
    		2500000000000000
    0.016"3/8"
    		2500000000000000
    0.02"3/8"
    		2500000000000000
    0.03"3/8"
    		5000000000000000
    0.06"3/8"
    		250000000000000
     
    For 5/8" Diameter Shoulder
    0.005"1/2"
    		250000000000000
    0.01"1/2"
    		2500000000000000
    0.016"1/2"
    		2500000000000000
    0.02"1/2"
    		2500000000000000
    0.03"1/2"
    		2500000000000000
    0.06"1/2"
    		100000000000000
     
    For 3/4" Diameter Shoulder
    0.005"5/8"
    		250000000000000
    0.01"5/8"
    		2500000000000000
    0.016"5/8"
    		1000000000000000
    0.02"5/8"
    		2500000000000000
    0.03"5/8"
    		1000000000000000
    0.06"5/8"
    		1000000000000000
     
    For 1" Diameter Shoulder
    0.005"7/8"
    		2500000000000000
    0.01"7/8"
    		2500000000000000
    0.03"7/8"
    		1000000000000000
    0.06"7/8"
    		1000000000000000
     
    For 4 mm Diameter Shoulder
    0.005"M4
    		1000000000000000
    0.01"M4
    		1000000000000000
    0.031"M4
    		1000000000000000
     
    For 5 mm Diameter Shoulder
    0.005"M5
    		1000000000000000
    0.01"M5
    		1000000000000000
    0.031"M5
    		1000000000000000
     
    For 6 mm Diameter Shoulder
    0.005"M6
    		1000000000000000
    0.01"M6
    		1000000000000000
    0.015"M6
    		1000000000000000
    0.02"M6
    		1000000000000000
    0.025"M6
    		1000000000000000
    0.031"M6
    		1000000000000000
    0.062"M6
    		50000000000000
     
    For 8 mm Diameter Shoulder
    0.005"M8
    		1000000000000000
    0.01"M8
    		1000000000000000
    0.015"M8
    		1000000000000000
    0.02"M8
    		1000000000000000
    0.025"M8
    		1000000000000000
    0.031"M8
    		50000000000000
    0.062"M8
    		1000000000000000
     
    For 10 mm Diameter Shoulder
    0.005"M10
    		1000000000000000
    0.01"M10
    		1000000000000000
    0.015"M10
    		1000000000000000
    0.02"M10
    		1000000000000000
    0.025"M10
    		1000000000000000
    0.031"M10
    		500000000000000
    0.062"M10
    		1000000000000000
     
    For 12 mm Diameter Shoulder
    0.005"M12
    		1000000000000000
    0.01"M12
    		1000000000000000
    0.015"M12
    		1000000000000000
    0.02"M12
    		50000000000000
    0.025"M12
    		50000000000000
    0.031"M12
    		500000000000000
    0.062"M12
    		1000000000000000
     
    For 16 mm Diameter Shoulder
    0.005"M16
    		50000000000000
    0.01"M16
    		50000000000000
    0.015"M16
    		50000000000000
    0.02"M16
    		500000000000000
    0.025"M16
    		500000000000000
    0.031"M16
    		500000000000000
    0.062"M16
    		50000000000000
     
    For 20 mm Diameter Shoulder
    0.005"M20
    		500000000000000
    0.01"M20
    		500000000000000
    0.015"M20
    		50000000000000
    0.02"M20
    		500000000000000
    0.025"M20
    		500000000000000
    0.031"M20
    		500000000000000
    0.062"M20
    		500000000000000
     

    Same-Size Thread Steel Hex-Drive Shoulder Screws

    Image of Product. Front orientation. Shoulder Screws. Same-Size Thread Steel Hex-Drive Shoulder Screws.
    Harness superior holding power with screws that also won't break. Threads that match the shoulder diameter give these a tighter hold than screws with a standard thread diameter. Use them in thicker materials and larger holes. While twice as strong as stainless steel screws, they're not corrosion resistant.
    Black-Oxide Alloy Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Head
    Each
    Shoulder
    Lg.
    Thread Size
    Thread
    Lg.
    Dia.
    Ht.
    Drive
    Size
    Tensile Strength,
    psi
    Material Certificate
    Form
    1-4
    5-Up
    Black-Oxide Alloy Steel
     
    1/4" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—0000000000000000000
    3/8"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
    1/2"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
    5/8"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
    3/4"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
    1"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
    1 1/4"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
    1 1/2"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
    2"1/4"-20
    		3/8"3/8"3/16"1/8"140,000—00000000000000000
     
    5/16" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    3/8"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    1/2"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    5/8"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    3/4"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    1"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    1 1/4"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    1 1/2"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
    2"5/16"-18
    		7/16"7/16"7/32"5/32"140,000—00000000000000000
     
    3/8" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
    3/8"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
    1/2"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
    5/8"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
    3/4"3/8"-16
    		1/2"9/16"1/4"3/16"140,000Digital
    		00000000000000000
    1"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
    1 1/4"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
    1 1/2"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
    2"3/8"-16
    		1/2"9/16"1/4"3/16"140,000—00000000000000000
     
    1/2" Diameter Shoulder (-0.004" to -0.002" Tolerance)
    1/4"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—00000000000000000
    3/8"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—00000000000000000
    1/2"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—00000000000000000
    5/8"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—00000000000000000
    3/4"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—000000000000000000
    1"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—000000000000000000
    1 1/4"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—000000000000000000
    1 1/2"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—0000000000000000000
    2"1/2"-13
    		5/8"3/4"5/16"1/4"140,000—0000000000000000000
     
    6 mm Diameter Shoulder (-0.072 mm to -0.01 mm Tolerance)
    6 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
    8 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
    10 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
    12 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
    16 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
    20 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
    25 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
    30 mmM6 × 1 mm10 mm10 mm5 mm3 mm140,000—00000000000000000
     
    8 mm Diameter Shoulder (-0.072 mm to -0.01 mm Tolerance)
    6 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
    8 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
    10 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
    12 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
    16 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
    20 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
    25 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
    30 mmM8 × 1.25 mm11 mm13 mm6 mm4 mm140,000—00000000000000000
     
    10 mm Diameter Shoulder (-0.072 mm to -0.01 mm Tolerance)
    6 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
    8 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
    10 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
    12 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
    16 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
    20 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
    25 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
    30 mmM10 × 1.5 mm13 mm16 mm7 mm5 mm140,000—00000000000000000
     
    12 mm Diameter Shoulder (-0.072 mm to -0.01 mm Tolerance)
    6 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—00000000000000000
    8 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—00000000000000000
    10 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—00000000000000000
    12 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—00000000000000000
    16 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—000000000000000000
    20 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—000000000000000000
    25 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—000000000000000000
    30 mmM12 × 1.75 mm16 mm18 mm9 mm6 mm140,000—0000000000000000000
     
    Shoulder Shims
    Image of ProductInUse. Front orientation. Contains Annotated. Shims. Shoulder Shortening.

    Shoulder

    Shortening

    Image of Product. Front orientation. Shims.
    Shoulder Shortening—Pare down the shoulder on screws or tighten the screw's hold. Stack multiple shims to get the exact spacing you need.
    Shoulder Shortening
    Thk.
    For Screw
    Size
    Pkg.
    Qty.
    Pkg.
    Spring Steel
     
    For 1/4" Diameter Shoulder
    0.005"No. 10
    		25000000000000000
    0.01"No. 10
    		250000000000000
    0.015"No. 10
    		250000000000000
    0.02"No. 10
    		250000000000000
    0.032"No. 10
    		10000000000000000
    0.062"No. 10
    		10000000000000000
     
    For 5/16" Diameter Shoulder
    0.005"1/4"
    		2500000000000000
    0.01"1/4"
    		250000000000000
    0.015"1/4"
    		250000000000000
    0.02"1/4"
    		250000000000000
    0.032"1/4"
    		10000000000000000
    0.062"1/4"
    		10000000000000000
     
    For 3/8" Diameter Shoulder
    0.005"5/16"
    		2500000000000000
    0.01"5/16"
    		250000000000000
    0.015"5/16"
    		250000000000000
    0.02"5/16"
    		250000000000000
    0.032"5/16"
    		10000000000000000
    0.062"5/16"
    		10000000000000000
     
    For 1/2" Diameter Shoulder
    0.005"3/8"
    		1000000000000000
    0.01"3/8"
    		250000000000000
    0.015"3/8"
    		250000000000000
    0.02"3/8"
    		250000000000000
    0.032"3/8"
    		5000000000000000
    0.062"3/8"
    		5000000000000000
     
    For 6 mm Diameter Shoulder
    0.005"M6
    		50000000000000
    0.01"M6
    		50000000000000
    0.02"M6
    		100000000000000
    0.06"M6
    		50000000000000
     
    For 8 mm Diameter Shoulder
    0.005"M8
    		50000000000000
    0.01"M8
    		50000000000000
    0.015"M8
    		100000000000000
    0.02"M8
    		1000000000000000
    0.031"M8
    		100000000000000
    0.06"M8
    		50000000000000
     
    For 10 mm Diameter Shoulder
    0.005"M10
    		50000000000000
    0.01"M10
    		50000000000000
    0.015"M10
    		1000000000000000
    0.02"M10
    		1000000000000000
    0.031"M10
    		1000000000000000
    0.06"M10
    		50000000000000
     
    For 12 mm Diameter Shoulder
    0.005"M12
    		50000000000000
    0.01"M12
    		50000000000000
    0.015"M12
    		1000000000000000
    0.02"M12
    		1000000000000000
    0.031"M12
    		1000000000000000
    0.06"M12
    		50000000000000
     
    back to top