Combination Disc and Belt Sanders
Versatile enough to handle both detail work and heavy material removal, these are a disc and belt sander in one. The disc sander smooths edges, while the belt sander removes a lot of material on large surfaces. Adjustable belt tracking lets you maintain proper tension. Sanders with two voltages are wired for the lower voltage listed.
Sanders with a variable-speed motor let you set the speed for any task, so you can switch between materials or adjust for aggressive and fine sanding.
Sanders with a miter gauge make it easy to sand angles.
Sanders with a belt-release lever enable you to quickly swap out your belt.
Sanders with a detachable platen make it easy to sand contours.
For Adhesive-Back Disc | For Belt | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Dia. | Table Wd. | Table Lg. | Max. No-Load Speed, rpm | Wd. | Lg. | Orientation | Table Wd. | Table Lg. | Max. No-Load Speed, sfpm | Voltage | Current, A | Motor Speed, rpm | Features | Each | |
Variable Speed | ||||||||||||||||
Three-Prong Plug (Single Phase) with Miter Gauge | ||||||||||||||||
| 1 1/2 | 12" | 9" | 16" | 2,400 | 2" | 72" | Horizontal and Vertical | 2" | 6" | 6,250 | 120V AC 240V AC | 14 7 | 1,800 | Adjustable Belt Tracking, Belt Guard, Detachable Platen, Belt-Release Lever | 00000000 | 000000000 |
Stationary Belt Sanders
For stability while you sand, mount these stationary sanders to a workbench or floor stand. Because they’re stable, you’ll have both hands free to maneuver your workpiece against the sanding belt. They’re more powerful and hold larger sanding belts than portable belt sanders, so they’re useful for smoothing large surfaces and removing lots of material. Adjustable belt tracking lets you maintain proper belt tension.
These sanders are wired for the lower voltage listed. Sanding belts are sold separately.
Dust-collecting sanders remove particles from the air and surface of the belt to extend its life. Sanders with a dust extraction port connect to an external dust collector or vacuum system.Sanders for two sanding belts are more versatile than sanders that use a single belt. You can load different grits on each belt to quickly switch between coarse and fine sanding, set different speeds, or have two people use the sander simultaneously.
Variable-speed sanders let you set the speed for any task, so you can switch between materials or adjust for aggressive and delicate sanding.
Sanders with a contact wheel are good for more precise jobs, such as contouring, rounding edges, and sanding curved parts. The contact wheel makes less contact with your workpiece than the face of the sanding belt, giving you more control.
Sanders with a detachable platen make it easy to sand contours.
For Belts | No-Load Speed, sfpm | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | No. of | Wd. | Lg. | Orientation | Min. | Max. | No. of Speeds | Voltage | Current, A | Motor Speed, rpm | Includes | Features | Each | |
Three-Prong Plug (Single Phase) | ||||||||||||||
| 1 1/2 | 2 | 2" | 72" | Horizontal and Vertical | 1,800 | 5,000 | Variable | 120V AC 240V AC | 14 7 | 900, 1,800, 2,400 | Contact Wheel | Adjustable Belt Tracking, Belt Guard, Detachable Platen, Dust Extraction Port | 00000000 | 000000000 |
Oscillating Any-Angle Stationary Belt Sanders
For even wear across the sanding belt, these sanders move the belt up and down as it rotates. This dual motion reduces clogs, prevents overheating, and makes the belt last longer. The backing plate behind the belt has a graphite coating to reduce heat further. Position these sanders at the angle you need to best access your workpiece. Set the belt flat to sand long, flat surfaces or at a 90° angle to sand edges. It can also be tilted to any angle in between for beveling. To finish contoured surfaces, press your material against the outer drum.
These sanders have adjustable belt tracking, which lets you maintain proper belt tension. For quick belt changes, there’s a belt-release lever. If you want to connect them to a dust collector or vacuum system, they have a dust extraction port. Use with sanding belts (sold separately).
For Belt | Table | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Wd. | Lg. | Max. No-Load Speed, sfpm | No. of Speeds | Voltage | Current, A | Motor Speed, rpm | hp | Phase | Features | Each | |
| 6" | 89" | 9 3/4" | 29" | 3,900 | One | 120V AC/240V AC | 18/9 | 3,450 | 1 1/2 | Single | Adjustable Belt Tracking, Belt-Release Lever, Dust Extraction Port, Graphite-Coated Platen, Outer Drum | 00000000 | 000000000 |