Filter by
For Use With
Sold As
Maximum Rotation Speed
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Abrasive Material
Rotation Speed
Sanding Drum and Sleeve Kits
 |
These kits include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
Quick-Change Attachment—Kits with a quick-change attachment require no additional tools to switch out drums and sleeves. Twist the drum head by hand to tighten the sanding sleeve to the drum.
Sleeved Abrasive | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Shank Dia. | Drum Material | Material | Backing Material | For Use On | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Kits | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | 3/8" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | One drum in this size (Dia. × Lg.): 3" × 3"; two each of 50-, 80-, and 120-grit sleeves for each size drum (6 sleeves total) | 4648A19 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Three drums in these sizes (Dia. × Lg.): 1/2" × 3", 1" × 3", 1 1/2" × 3"; one each of 50-, 80-, and 120-grit sleeves for each size drum (9 sleeves total) | 4648A15 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Four drums in these sizes (Dia. × Lg.): 1/2" × 2", 3/4" × 2", 1" × 2", and 1 1/2" × 2"; one each of 50-, 80-, and 120-grit sleeves for each size drum (12 sleeves total) | 4648A13 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | 1/8" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 3/8" × 1/2", 1/2" × 1/2", 1/2" × 3/4", 3/4" × 1/2", and 3/4" × 3/4"; one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 4648A14 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", and 2" × 1 1/2"; one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 4648A12 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 96 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Six drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", 2" × 1 1/2", and 3" × 1"; five each of 36-, 50-, and 120-grit sleeves for each size drum (90 sleeves total) | 4735A11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Kits with Quick-Change Attachment | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Three drums in these sizes (Dia. × Lg.): 1/2" × 3", 1" × 3", 1 1/2" × 3"; one each of 50-, 80-, and 120-grit sleeves for each size drum (9 sleeves total) | 4648A18 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Four drums in these sizes (Dia. × Lg.): 1/2" × 2", 3/4" × 2", 1" × 2", and 1 1/2" × 2"; one each of 50-, 80-, and 120-grit sleeves for each size drum (12 sleeves total) | 4648A17 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | 1/4" | Rubber | Aluminum Oxide | Cloth | Steel, Wood | Five drums in these sizes (Dia. × Lg.): 1/2" × 1/2", 3/4" × 1", 1" × 1", 1 1/2" × 1 1/2", and 2" × 1 1/2"; one each of 50-, 80-, and 120-grit sleeves for each size drum (15 sleeves total) | 4648A16 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Spiral-Wound Cartridge Sanding Roll Assortments
 |
As the outer layer wears away, new abrasive is exposed.
Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.
No. of Pieces | Arbor Hole Dia. | Abrasive Material | For Use On | For Use With | Includes | Each | ||
|---|---|---|---|---|---|---|---|---|
| 122 | 1/8" | Aluminum Oxide | Steel, Wood | Grinders for Bits and Burs | 2 1/4" Dia. Shank Adapters 16 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1" Lg. 9 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1 1/2" Lg. 6 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1" Lg. 12 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 8 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 9 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 6 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 16 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1" Lg. 12 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1 1/2" Lg. 6 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1" Lg. 12 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 8 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. | 4690A91 | 0000000 |
Replaceable-Cap Sanding Bit Assortments
 |
 |
Flat Cap Shown with Shank |
 |
Curved Cap Shown with Shank |
 |
Point Cap Shown with Shank |
Keep bits in several sizes and grits on hand to sand grooves, slots, and other hard-to-reach spots. When the abrasive dulls, slide a new cap onto the shank rather than replacing the whole bit. These bits are coated with aluminum oxide, which is the most common choice for general purpose sanding. They’re often used to finish metal or wood workpieces.
No. of Pieces | Bit Style | Includes | Max. Rotation Speed, rpm | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Container Type | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 110 | Flat | One of each shank in these sizes (Head Dia. × Overall Lg.): ³⁄₁₆" × 1 ⅝", ⁹⁄₃₂" × 1 ¾", ⅜" × 1 ²⁷⁄₃₂", ½" × 2 ⁵⁄₁₆", ⅝" × 2 ⅝"; Five each of 60-, 150-, and 280-grit sanding caps in these sizes (Head Dia. × Overall Lg.): ⅜" × ⅝", ½" × ¹¹⁄₁₆", ⅝" × 1"; 10 each of 80-, 150-, and 280-grit sanding caps in this size (Dia. × Lg.): ³⁄₁₆" × ⅜"; 10 each of 60-, 150-, and 280-grit sanding caps in this size (Dia. × Lg.): ⁹⁄₃₂" × ½" | 12,000 | Aluminum Oxide | Cloth | Steel, Wood | Drills, Grinders for Bits and Burs | Compartmented Plastic Box | 8299N113 | 0000000 | |
| 110 | Curved | One of each shank in these sizes (Head Dia. × Overall Lg.): ³⁄₁₆" × 1 ⅝", ⁹⁄₃₂" × 1 ¾", ⅜" × 1 ²⁷⁄₃₂", ½" × 2 ⁵⁄₁₆", ⅝" × 2 ⅝"; Five each of 60-, 150-, and 280-grit sanding caps in these sizes (Head Dia. × Overall Lg.): ⅜" × ⅝", ½" × ¹¹⁄₁₆", ⅝" × 1"; 10 each of 80-, 150-, and 280-grit sanding caps in this size (Dia. × Lg.): ³⁄₁₆" × ⅜"; 10 each of 60-, 150-, and 280-grit sanding caps in this size (Dia. × Lg.): ⁹⁄₃₂" × ½" | 12,000 | Aluminum Oxide | Cloth | Steel, Wood | Drills, Grinders for Bits and Burs | Compartmented Plastic Box | 8299N112 | 000000 | |
| 110 | Point | One of each shank in these sizes (Head Dia. × Overall Lg.): ³⁄₁₆" × 1 ⅝", ⁹⁄₃₂" × 1 ¾", ⅜" × 1 ²⁷⁄₃₂", ½" × 2 ⁵⁄₁₆", ⅝" × 2 ⅝"; Five each of 60-, 150-, and 280-grit sanding caps in these sizes (Head Dia. × Overall Lg.): ⅜" × ⅝", ½" × ¹¹⁄₁₆", ⅝" × 1"; 10 each of 80-, 150-, and 280-grit sanding caps in this size (Dia. × Lg.): ³⁄₁₆" × ⅜"; 10 each of 60-, 150-, and 280-grit sanding caps in this size (Dia. × Lg.): ⁹⁄₃₂" × ½" | 30,000 | Aluminum Oxide | Cloth | Steel, Wood | Drills, Grinders for Bits and Burs | Compartmented Plastic Box | 8299N111 | 000000 | |
| 285 | Flat, Curved, Point | One of each shank for flat, curved, and point caps in these sizes (Head Dia. × Overall Lg.): ³⁄₁₆" × 1 ⅝", ⁹⁄₃₂" × 1 ¾", ⅜" × 1 ²⁷⁄₃₂", ½" × 2 ⁵⁄₁₆",⅝" × 2 ⅝"; Six each of 60-, 150-, and 280-grit flat, curved, and point sanding caps in these sizes (Dia. × Lg.): ⁹⁄₃₂" × ½", ⅜" × ⅝", ½" × ¹¹⁄₁₆", ⅝" × 1"; Six each of 80-, 150-, and 280-grit flat, curved, and point sanding caps in this size (Dia. × Lg.): ³⁄₁₆" × ⅜" | 12,000 | Aluminum Oxide | Cloth | Steel, Wood | Drills, Grinders for Bits and Burs | Compartmented Plastic Box | 8299N114 | 000000 |
Spiral-Wound Cartridge Sanding Roll Assortments for Stainless Steel and Hard Metals
 |
Keep spiral-wound sanding rolls in a mix of grits, shapes, and diameters ready to use. Coated with aluminum oxide ceramic abrasive, these rolls are sharp and dense enough to shape hard metals, such as stainless steel, carbon steel, and cast iron. The abrasive grit continuously fractures to create sharp edges as you sand, so you can sand faster and longer than with standard abrasives like aluminum oxide. As the outer layer wears away, new abrasive is exposed.
Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.
No. of Pieces | Arbor Hole Dia. | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Includes | Each | ||
|---|---|---|---|---|---|---|---|---|---|
| 58 | 1/8" | Ceramic Alumina | Cloth | Stainless Steel, Titanium, Steel, Iron, Nickel | Grinders for Bits and Burs | 2 1/8" Dia. Shank Adapters 6 Rough-Finish (60 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 4 Rough-Finish (60 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 12 Rough-Finish (60 Grit) Tapered Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 6 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 4 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 14 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. 6 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg. 4 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg. | 9035N11 | 0000000 |
