3⁄4" Diameter Sanding Bits

Filter by

Diameter

For Use On

Grit

Length

Shank Diameter

Shape

Form

Abrasive Material

For Finish

For Use With

Grinders for Bits and Burs

Abrasive Backing Material

Cloth

Nylon Mesh

Rotation Speed

10,000 rpm to 19,999 rpm

20,000 rpm to 29,999 rpm

40,000 rpm or greater

Material

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Maximum Rotation Speed

Arbor Hole Diameter

Grit Rating

Countersink Angle

Arbor Hole

Performance

Nylon Mesh Grade

Bit Style

Shank Length

46 Products

Nylon Mesh Cushioned Sanding Bits

Style C

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes in small, recessed, and hard-to-reach areas.

1/4" Dia. × 1 1/2" Lg. Shank

Style C

Coarse Grade—Coarse grade is for aggressive deburring and cleaning.

Medium Grade—Medium grade is for deburring and polishing.

Fine Grade—Fine grade is for light blending and finishing.

	Dia.	Lg.	Nylon Mesh Grade	For Finish	Max. Rotation Speed, rpm	Color	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each
Style C



	A5	3/4"	1 1/8"	Coarse	Rough	45,000	Gray	Aluminum Oxide	Nylon Mesh	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	000000


	A5	3/4"	1 1/8"	Medium	Smooth	45,000	Gray	Aluminum Oxide	Nylon Mesh	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000
	A5	3/4"	1 1/8"	Fine	Extra Smooth	45,000	Gray	Silicon Carbide	Nylon Mesh	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000

Replaceable-Cap Sanding Bits for Countersunk Holes

Choose a bit with the same angle as your countersink to debur the inside of the hole. Slip a cap onto the head of a shank (sold separately).

For Rough Finish—60 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

For Rough Finish—80 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

For Smooth Finish—100 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

For Smooth Finish—120 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

For Smooth Finish—150 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

For Smooth Finish—180 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

For Extra-Smooth Finish—240 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

For Extra-Smooth Finish—320 Grit

Cap with Required

Shank

	Caps										Required Shanks
	Dia.	Lg.	For Shank Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With		Each		Each
60° Countersink Angle



		3/4"	3/4"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	00000	00000000	000000


		90° Countersink Angle



				3/4"	1/2"	1/4"	20,000	Aluminum Oxide	Cloth	Steel, Wood	Drills, Grinders for Bits and Burs	00000000	0000	00000000	00000

Spiral-Wound Sanding Rolls

As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter or tapered spindle with a shank is required (both sold separately). The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. The diameter listed is for the large end of the roll.

Straight—Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.

Taper—Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes.

	Lg.	Arbor Hole Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With	Choose a Grit	Pkg. Qty.		Pkg.
Straight







			For Rough Finish

			3/4"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	50 , 60 , 80	10	00000000	000000


			3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	50 , 60 , 80	10	00000000	00000
			3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	50 , 60 , 80	10	00000000	00000




					For Smooth Finish

					3/4"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	120 , 180	10	00000000	00000


					3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	120 , 180	10	00000000	00000
					3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	120 , 180	10	00000000	00000




							For Extra-Smooth Finish

							3/4"	1"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	240 , 320	10	00000000	00000


							3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	240 , 320	10	00000000	00000
							3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	320	10	00000000	00000


							Taper







											For Rough Finish

											3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	50 , 60 , 80	10	00000000	00000


											3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	50 , 60 , 80	10	00000000	00000




													For Smooth Finish

													3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	120 , 180	10	00000000	00000


													3/4"	2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	120 , 180	10	00000000	00000




													For Extra-Smooth Finish

													3/4"	1 1/2"	3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	240 , 320	10	00000000	00000


	3/4"	2"											3/16"	18,000	Aluminum Oxide	Cloth	Steel, Wood	Grinders for Bits and Burs	240	10	00000000	00000

Required Arbors for Straight and Tapered Rolls

	Overall Lg.		Each
For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia.



	1/4"	2 3/4"	0000000	00000


	For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia.



			1/4"	3"	0000000	0000


			For 2" Lg. Rolls with 3/16" Arbor Hole Dia.



					1/4"	3 1/2"	0000000	0000

Spiral-Wound Sanding Rolls for Stainless Steel and Hard Metals

Straight

Coated with aluminum oxide ceramic, these rolls are sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly. The abrasive grit continually fractures to produce new, sharp cutting edges. It sands faster and lasts longer than aluminum oxide but requires more force to abrade properly. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).

Straight—Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.

											Each
	Dia.	Lg.	Arbor Hole Dia.	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With	Grit		1-49	50-Up
Straight







				For Rough Finish

				3/4"	1 1/2"	1/8"	18,000	Ceramic Alumina	Cloth	Stainless Steel, Titanium, Steel, Iron, Nickel	Grinders for Bits and Burs	80	0000000	00000	00000

Required Arbors for Straight and Tapered Rolls

	Shank Dia.	Overall Lg.
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia.


1/8"	3"	0000000	00000
1/4"	2 3/4"	0000000	0000
1/4"	4"	0000000	0000
1/4"	6"	0000000	0000

Long-Life Spiral-Wound Sanding Rolls

The premium abrasive stays sharp longer. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).

	Max. Rotation Speed, rpm	Abrasive Material	Abrasive Backing Material	For Use On	For Use With	Choose a Grit	Pkg. Qty.		Pkg.
Straight







	For Rough Finish

	3/4"	1"	3/16"	18,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	36 , 60 , 80	10	0000000	000000


	3/4"	1 1/2"	3/16"	18,000	Zirconia Alumina	Cloth	Steel, Wood	Grinders for Bits and Burs	36 , 50 , 60 , 80	10	0000000	00000

Required Arbors for Straight and Tapered Rolls