These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

The grit particles are block shaped and cut slowly.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

A selection of 40 emery and crocus sanding sheets are included in these assortments.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

Evenly sand two surfaces at once.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

For a consistent finish, these pads are made with nylon mesh that flexes to compensate for uneven pressure as you sand. The hook and loop backing lets you attach, remove, and reuse these pads until they’re used up.

Quickly attach, remove, and reuse.

A coating prevents dust and debris from building up on the abrasive surface.

Dust and debris won't build up on the abrasive surface.

Attach these sheets to pole sanders to smooth ceilings and walls. They’re covered in aluminum oxide, which is the most common abrasive for general use.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Sharper than silicon carbide and harder than ceramic alumina, the diamond abrasive on these sheets is ideal for sanding concrete, fiberglass, and other tough materials.

Stick these sheets to your dust-collecting detail sander to smooth edges, corners, and other tight spaces.

Quickly attach, remove, and reuse.

Attach a nylon mesh sanding pad to these blocks for improved comfort and control.

Squeeze these blocks into corners or hug curved edges—they’re made from flexible foam.

Lap without the mess of pastes and slurries—abrasive is embedded in the surface of this waterproof film.

Often used to polish optics such as mirrors and lenses.