The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

These discs have a long-lasting diamond abrasive.

Coated with zirconia alumina to stay sharper longer.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The premium abrasive stays sharp longer.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Coated with diamond grit, use these discs for sanding hard nonmetals.

Coated with either ceramic alumina or a premium form of aluminum oxide, these discs last longer, cut faster, and produce a more consistent finish than standard hook and loop discs.

The mesh backing lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

A coating prevents dust and debris from building up on the abrasive surface.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.