These discs have a harder abrasive than standard quick-change discs.

Quickly remove large amounts of material—discs with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

These discs have a harder abrasive than standard flexible-edge quick-change discs.

The premium abrasive stays sharp longer.

A special fastener on the back of these discs allows you to easily swap one disc for another.

These discs have a long-lasting diamond abrasive.

Coated with zirconia alumina to stay sharper longer.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Coated with diamond grit, use these discs for sanding hard nonmetals.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

The abrasive material on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and iron without dulling quickly.

Change your discs less often—the zirconia alumina grit on these discs continually fractures to produce new, sharp cutting edges.

Holes in the disc let you see the surface you’re sanding.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

These discs have 30% more flaps than standard flap sanding discs to last longer.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.