The premium abrasive stays sharp longer.

The flaps are slit into narrow strips to provide more flexibility than other flap wheels.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A coating prevents dust and debris from building up on the abrasive surface.

These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

An additive in the abrasive resists heat.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

Polish, clean, and debur deep inside tubes and cylinders.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.

Set at an angle and widely spaced, the flaps reach into corners.