Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

Holes allow dust removal when used with a vacuum sander.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

Quickly sand while capturing up to 97% of the dust generated.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A special fastener on the back of these discs allows you to easily swap one disc for another.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Holes allow dust removal when used with a vacuum sander.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.

Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A slick coating on these rolls prevents debris from accumulating on the abrasive surface and keeps operating temperatures low.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

Quickly attach, remove, and reuse.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

Cut to convenient sizes and shapes, these fit most sheet sanders.

Stick these sheets to your dust-collecting detail sander to smooth edges, corners, and other tight spaces.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Dust and debris won't build up on the abrasive surface.

Like tank treads, these belts have wide gaps to collect and channel away debris as they turn. Multiple layers of abrasive arranged in a brick pattern create highly consistent finishes.

Smooth or shape work surfaces. Good for general purpose sanding, the aluminum oxide abrasive on these belts is tough and won’t crack under stress.

One of the sharpest abrasives, the silicon carbide on these belts sands soft metals and nonmetals like aluminum and rubber with ease, and it generates minimal heat to prevent material buildup.

Leave a smooth, consistent finish on wide workpieces.