Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

Coated with either ceramic alumina or a premium form of aluminum oxide, these discs last longer, cut faster, and produce a more consistent finish than standard hook and loop discs.

The mesh backing lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

A special fastener on the back of these discs allows you to easily swap one disc for another.

These discs have a harder abrasive than standard quick-change discs.

The heavy duty construction provides more support than standard discs for heavy material removal.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

The premium abrasive stays sharp longer.

A special fastener on the back of these discs allows you to easily swap one disc for another.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Coated with zirconia alumina to stay sharper longer.

Holes allow dust removal when used with a vacuum sander.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Fit these discs over your tool's arbor.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

A coating prevents dust and debris from building up on the abrasive surface.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

Create smooth finishes on wood with these garnet sheets.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

A thicker, heavier construction than standard rolls withstands tough sanding.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A slick coating on these rolls prevents debris from accumulating on the abrasive surface and keeps operating temperatures low.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

Cut the length you need, then quickly attach, remove, and reuse.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

Quickly attach and remove these hook and loop sheets to detail sanders. These sheets squeeze into corners and along edges and angled surfaces.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Cut to convenient sizes and shapes, these fit most sheet sanders.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

Attach these sheets to pole sanders to smooth ceilings and walls. They’re covered in aluminum oxide, which is the most common abrasive for general use.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.

Sand inside pipes, tubes, and hard to reach corners with these pads.

The backing cushions the abrasive to prevent gouging your work surface.

Smooth or shape work surfaces. Good for general purpose sanding, the aluminum oxide abrasive on these belts is tough and won’t crack under stress.

Change your sanding belts less often—these belts have a zirconia alumina abrasive that continuously fractures to form new sharp edges. These self-sharpening edges are great for aggressively removing material on steel and wood.

These belts last at least 50% longer and sand faster than standard ceramic alumina belts.

One of the sharpest abrasives, the silicon carbide on these belts sands soft metals and nonmetals like aluminum and rubber with ease, and it generates minimal heat to prevent material buildup.