Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

The grit particles are block shaped and cut slowly to produce a polished surface on metals.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

A thicker, heavier construction than standard rolls withstands tough sanding.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

A coating prevents dust and debris from building up on the abrasive surface.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.

With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel.

Cut the length you need, then quickly attach, remove, and reuse.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

A coating prevents dust and debris from building up on the abrasive surface.

Easy to attach and remove, these sheets grip the surface of your vacuum detail sander. Vacuum holes allow dust to get sucked up before it can build up and dull the abrasive surface.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Stick these sheets to your dust-collecting detail sander to smooth edges, corners, and other tight spaces.

Dust and debris won't build up on the abrasive surface.

Stick these sheets to a hand sanding block for a more secure grip than hook and loop sanding sheets.

Peel and stick to your file handle. When it’s time to change the sheet, peel it off.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

The premium abrasive stays sharp longer.

The secure bond of the roll to the integrated shank prevents loosening from vibration while sanding, resulting in a smooth finish.

Coated with ceramic alumina abrasive, these rolls are sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.