McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    83 Products

    Sanding Sleeve Drums for Handheld Power Tools

    Image of System. Front orientation. Contains Annotated. Sanding Sleeve Drums. Sanding Sleeve Drums for Handheld Power Tools.
    Image of Product. Front orientation. Sanding Sleeve Drums. Sanding Sleeve Drums for Handheld Power Tools.
    Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve. Secure the shank into the collet or chuck of your tool. A drum is required to use a sanding sleeve.
    Drum
    Dia.
    Lg.
    Shank
    Dia.
    Drum
    Material
    Max. Rotation
    Speed, rpm
    Each
    1/4"1/2"1/8"Rubber
    		30,000000000000000
    1/4"3/4"1/8"Rubber
    		22,00000000000000
    1/4"1"1/8"Rubber
    		20,00000000000000
    3/8"1/2"1/8"Rubber
    		30,00000000000000
    3/8"1"1/8"Rubber
    		18,00000000000000
    1/2"1/2"1/8"Rubber
    		30,0000000000000
    1/2"1/2"1/4"Rubber
    		30,00000000000000
    1/2"3/4"1/8"Rubber
    		18,00000000000000
    1/2"3/4"1/4"Rubber
    		25,00000000000000
    1/2"1"1/4"Rubber
    		20,00000000000000
    1/2"1 1/2"1/4"Rubber
    		14,00000000000000
    1/2"2"1/4"Rubber
    		10,00000000000000
    5/8"1/2"1/4"Rubber
    		27,00000000000000
    5/8"1"1/4"Rubber
    		19,00000000000000
    3/4"1/2"1/4"Rubber
    		27,00000000000000
    3/4"3/4"1/4"Rubber
    		24,00000000000000
    3/4"1"1/4"Rubber
    		19,00000000000000
    3/4"1 1/2"1/4"Rubber
    		12,00000000000000
    3/4"2"1/4"Rubber
    		9,00000000000000
    1"1/2"1/4"Rubber
    		18,00000000000000
    1"3/4"1/4"Rubber
    		15,00000000000000
    1"1"1/4"Rubber
    		15,00000000000000
    1"1 1/2"1/4"Rubber
    		10,00000000000000
    1"2"1/4"Rubber
    		8,00000000000000
    1"3"1/4"Rubber
    		5,000000000000000
    1 1/4"1"1/4"Rubber
    		14,00000000000000
    1 1/4"2"1/4"Rubber
    		7,00000000000000
    1 1/2"1"1/4"Rubber
    		14,00000000000000
    1 1/2"1 1/2"1/4"Rubber
    		10,00000000000000
    1 1/2"2"1/4"Rubber
    		7,00000000000000
    2"1"1/4"Rubber
    		11,00000000000000
    2"1 1/2"1/4"Rubber
    		8,00000000000000
    2"2"1/4"Rubber
    		6,00000000000000
    3"1"1/4"Rubber
    		3,000000000000000
    3"1"3/8"Rubber
    		3,000000000000000
    3"2"1/4"Rubber
    		3,000000000000000
    3"2"3/8"Rubber
    		3,000000000000000
    3"3"3/8"Rubber
    		3,00000000000000
     

    Quick-Change Sanding Sleeve Drums for Handheld Power Tools

    Image of System. Front orientation. Contains Annotated. Sanding Sleeve Drums. Quick-Change Sanding Sleeve Drums for Handheld Power Tools.
    Image of Product. Front orientation. Sanding Sleeve Drums. Quick-Change Sanding Sleeve Drums for Handheld Power Tools.
    No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum. Secure the shank into the collet or chuck of your tool. A drum is required to use a sanding sleeve.
    Drum
    Dia.
    Lg.
    Shank
    Dia.
    Drum
    Material
    Max. Rotation
    Speed, rpm
    Each
    1/2"1/2"1/8"Rubber
    		30,0000000000000000
    1/2"1/2"1/4"Rubber
    		30,000000000000000
    1/2"3/4"1/4"Rubber
    		25,000000000000000
    1/2"1"1/4"Rubber
    		20,000000000000000
    1/2"1 1/2"1/4"Rubber
    		14,000000000000000
    1/2"2"1/4"Rubber
    		10,000000000000000
    5/8"1/2"1/4"Rubber
    		27,000000000000000
    5/8"1"1/4"Rubber
    		19,000000000000000
    3/4"1/2"1/4"Rubber
    		27,000000000000000
    3/4"3/4"1/4"Rubber
    		24,000000000000000
    3/4"1"1/4"Rubber
    		19,000000000000000
    3/4"1 1/2"1/4"Rubber
    		12,000000000000000
    3/4"2"1/4"Rubber
    		9,000000000000000
    1"1/2"1/4"Rubber
    		18,000000000000000
    1"3/4"1/4"Rubber
    		15,000000000000000
    1"1"1/4"Rubber
    		15,000000000000000
    1"1 1/2"1/4"Rubber
    		10,000000000000000
    1"2"1/4"Rubber
    		8,000000000000000
    1"3"1/4"Rubber
    		5,0000000000000000
    1 1/4"1"1/4"Rubber
    		14,000000000000000
    1 1/4"2"1/4"Rubber
    		7,000000000000000
    1 1/2"1"1/4"Rubber
    		14,000000000000000
    1 1/2"1 1/2"1/4"Rubber
    		10,000000000000000
    1 1/2"2"1/4"Rubber
    		7,000000000000000
    2"1"1/4"Rubber
    		11,000000000000000
    2"1 1/2"1/4"Rubber
    		8,0000000000000000
    2"2"1/4"Rubber
    		6,0000000000000000
    3"1"1/4"Rubber
    		3,0000000000000000
    3"1"3/8"Rubber
    		3,0000000000000000
    3"2"1/4"Rubber
    		3,0000000000000000
    3"2"3/8"Rubber
    		3,0000000000000000
    3"3"3/8"Rubber
    		3,0000000000000000
     

    Sanding Sleeve Drums for Straight Shafts

    Image of System. Front orientation. Contains Annotated. Sanding Sleeve Drums. Sanding Sleeve Drums for Straight Shafts.
    Image of Product. Front orientation. Sanding Sleeve Drums. Sanding Sleeve Drums for Straight Shafts.
    Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums. Slide a sleeve on the drum and tighten the nut to securely hold the sleeve. Drums are required for the use of sanding sleeves.
    Drum
    Dia.
    Lg.
    For Shaft
    Dia.
    Drum
    Material
    Max. Rotation
    Speed, rpm
    Includes
    Each
    2"2"1/2"Rubber
    		6,000Set Screws0000000000000
    3"1"1/2"Rubber
    		3,000Set Screws000000000000
    3"2"1/2"Rubber
    		3,000Set Screws000000000000
    3"3"1/2"Rubber
    		3,000Set Screws000000000000
    3"3"5/8"Rubber
    		3,000Set Screws000000000000
    3"3"3/4"Rubber
    		3,000Set Screws000000000000
     

    Sanding Sleeve Drums for Threaded Shafts

    Image of System. Front orientation. Contains Annotated. Sanding Sleeve Drums. Sanding Sleeve Drums for Threaded Shafts.
    Image of Product. Front orientation. Sanding Sleeve Drums. Sanding Sleeve Drums for Threaded Shafts.
    Install a sanding sleeve on the threaded shaft of a bench or pedestal grinder using one of these drums. Slide a sleeve on the drum and tighten the nut to securely hold the sleeve. Drums are required for the use of sanding sleeves.
    Drum
    Dia.
    Lg.
    For Shaft
    Dia.
    Drum
    Material
    For Shaft
    Thread Size
    Max. Rotation
    Speed, rpm
    Each
    3"3"1/2"Rubber
    		1/2"-20
    		3,000000000000000
    3"3"5/8"Rubber
    		5/8"-11
    		3,00000000000000
     

    Sanding Sleeve Drums for Dremel Handheld Power Tools

    Image of System. Front orientation. Contains Annotated. Sanding Sleeve Drums. Sanding Sleeve Drums for Dremel Handheld Power Tools.
    Image of Product. Front orientation. Sanding Sleeve Drums. Sanding Sleeve Drums for Dremel Handheld Power Tools.
    This drum is required to use a sanding sleeve with a Dremel grinder. Slide a sleeve on the drum and tighten the screw to expand the drum to securely hold the sleeve. Install the shank into the grinder’s collet.
    Drum
    Dia.
    Lg.
    Shank
    Dia.
    Drum
    Material
    Max. Rotation
    Speed, rpm
    Includes
    For Mfr. Model No.
    Each
    For Dremel
    1/2"1/2"1/8"Rubber
    		5,000One 60 Grit Sanding Sleeve100-N/7, 285, 3000-1/24, 3965-02, 4000-2/30, 7800-02, 8000, 8100-N/21, 8200000000000000
     

    Flap Sanding Sleeve Drums for Handheld Power Tools

    Image of System. Front orientation. Contains Annotated. Sanding Sleeve Drums. Flap Sanding Sleeve Drums for Handheld Power Tools.
    Image of Product. Front orientation. Sanding Sleeve Drums. Flap Sanding Sleeve Drums for Handheld Power Tools.
    Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve. The shank on these drums installs directly into the collet of a grinder or the chuck on a hand-held drill. A drum is required to use a sanding sleeve.
    Drum
    Dia.
    Lg.
    Shank
    Dia.
    Drum
    Material
    Max. Rotation
    Speed, rpm
    Each
    7/8"3/4"1/4"Rubber
    		26,0000000000000000
    1 3/16"3/4"1/4"Rubber
    		19,100000000000000
    1 3/16"1 3/16"1/4"Rubber
    		19,100000000000000
    3"1 3/16"5/16"Rubber
    		7,600000000000000
     
    back to top