These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

The grit particles are block shaped and cut slowly.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

Create smooth finishes on wood with these garnet sheets.

Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

The grit particles are block shaped and cut slowly to produce a polished surface on metals.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

Keep a variety of grits on hand, so you always have the right one for the job. These sheets won’t deteriorate when used wet or with grease, chemicals, cutting fluids, and other solvents.

Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.

With sheets in various grits, these assortments help you sand material to your desired finish. Coated in resin, these sheets are slow to degrade when used with water, grease, cutting fluids, or other chemicals.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

The sharp abrasive on these rolls sands hard metals like stainless steel, nickel, and iron.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

For a consistent finish, these pads are made with nylon mesh that flexes to compensate for uneven pressure as you sand. The hook and loop backing lets you attach, remove, and reuse these pads until they’re used up.

Quickly attach, remove, and reuse.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

These sheets have a long-lasting diamond abrasive.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.

Stick these sheets to a hand sanding block for a more secure grip than hook and loop sanding sheets.

Built for wet sanding joint compound on drywall and plaster, these sanding sheets won’t fall apart when used with water. They also withstand grease, chemicals, cutting fluids, and other solvents that may be on your work surface.

Use these sheets with pole sanders.

Easy to attach and remove, these sheets grip the surface of your vacuum detail sander. Vacuum holes allow dust to get sucked up before it can build up and dull the abrasive surface.

A coating prevents dust and debris from building up on the abrasive surface.

Cut to convenient sizes and shapes, these fit most sheet sanders.

When you need to achieve a more consistent finish, choose nylon mesh sanding belts over paper- or cloth-backed belts.

Like tank treads, these belts have wide gaps to collect and channel away debris as they turn. Multiple layers of abrasive arranged in a brick pattern create highly consistent finishes.

Sanding belts with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina belts because of their sharp, outwardly pointed grit.

Change your sanding belts less often—these belts have a zirconia alumina abrasive that continuously fractures to form new sharp edges. These self-sharpening edges are great for aggressively removing material on steel and wood.

One of the sharpest abrasives, the silicon carbide on these belts sands soft metals and nonmetals like aluminum and rubber with ease, and it generates minimal heat to prevent material buildup.

For sanding hard, nonmetal surfaces, these belts are diamonds in the rough. Their diamond abrasive is the hardest and most durable we offer—it's sharp like silicon carbide and tough like ceramic alumina.

Dense and hard, the ceramic alumina abrasive on these belts removes material faster and lasts longer than standard aluminum oxide abrasives.

Use these narrow belts on hand-held sanding sticks.

At least 16" wide, these sanding belts leave a smooth, consistent finish on large workpieces. They have an aluminum oxide abrasive, which is the most common abrasive for general use.

Keep spiral-wound sanding rolls in a mix of grits, shapes, and diameters ready to use. Coated with ceramic alumina abrasive, these rolls are sharp and dense enough to shape hard metals, such as stainless steel, carbon steel, and cast iron.

Change your sanding rolls less often and produce a more consistent finish compared to standard sanding rolls.

Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.