Create smooth finishes on wood with these garnet sheets.

A thicker, heavier construction than standard rolls withstands tough sanding.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

A slick coating on these rolls prevents debris from accumulating on the abrasive surface and keeps operating temperatures low.

These sponges prevent debris from accumulating on the abrasive surface and keep operating temperatures low.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

These sheets have a long lasting diamond abrasive.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel.

A coating prevents dust and debris from building up on the abrasive surface.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Stick these sheets to your dust-collecting detail sander to smooth edges, corners, and other tight spaces.

These sheets have a long-lasting diamond abrasive.

A coating prevents dust and debris from building up on the abrasive surface.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

Built for wet sanding joint compound on drywall and plaster, these sanding sheets won’t fall apart when used with water. They also withstand grease, chemicals, cutting fluids, and other solvents that may be on your work surface.

A coating prevents dust and debris from building up on the abrasive surface.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The premium abrasive stays sharp longer.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Coated with diamond grit, use these discs for sanding hard nonmetals.

Coated with either ceramic alumina or a premium form of aluminum oxide, these discs last longer, cut faster, and produce a more consistent finish than standard hook and loop discs.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

Quickly remove large amounts of material—discs with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The heavy duty construction provides more support than standard discs for heavy material removal.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Change your sanding belts less often—these belts have a zirconia alumina abrasive that continuously fractures to form new sharp edges. These self-sharpening edges are great for aggressively removing material on steel and wood.

Multiple layers of abrasive arranged in a pattern create highly consistent finishes.

These belts last at least 50% longer and sand faster than standard ceramic alumina belts.

One of the sharpest abrasives, the silicon carbide on these belts sands soft metals and nonmetals like aluminum and rubber with ease, and it generates minimal heat to prevent material buildup.

With a flexible, cloth backing, these belts resist tearing. 16" or wider, they’re for sanding large surfaces.

Leave a smooth, consistent finish on wide workpieces.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface. These sleeves shape, deburr, and sand edges and internal surfaces.

As the outer layer wears away, new abrasive is exposed.

Coated with ceramic alumina abrasive, these rolls are sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Choose a bit with the same angle as your countersink to debur the inside of the hole.

The premium abrasive stays sharp longer.

An additive in the abrasive resists heat.

The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

An additive in the abrasive resists heat.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

The rubber backing cushions the abrasive to prevent gouging your aluminum, soft metal, and nonmetal work surfaces.

Made with boron nitride, second in hardness to diamond, these wheels are highly wear resistant and easily cut difficult-to-grind steel parts.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.

The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.

Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.