These rolls can be cut to length.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.

A coating prevents dust and debris from building up on the abrasive surface.

A special fastener on the back of these discs allows you to easily swap one disc for another.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flap sanding discs for corners.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

Set at an angle and widely spaced, the flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

Set at an angle and widely spaced, the flaps reach into corners.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer.

These belts have a long-lasting diamond abrasive.