Mount this arbor into manual milling machines that have an R8 taper spindle. It has a spring-loaded centering mechanism which allows it to hold saws with a range of arbor holes sizes. Use with high-speed steel slitting saws.

Switch hole saws without using adapters or special tools. These arbors have a spring-loaded quick-release collar that pulls back to let you quickly unthread the hole saw from the arbor instead of using a wrench or loosening set screws. They fit all brands of threaded hole saws. A built-in pilot drill guides the hole saw.

Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders. Arbors are also known as mandrels.

For technical drawings and 3-D models, click on a part number.

Attach cutoff wheels to a Dremel grinder. Arbors are also known as mandrels.

Install cutoff wheels, grinding wheels, and other abrasive discs to the threaded shaft on bench-top motors, grinders, and buffers. Arbors are also known as mandrels.

Pair with Dremel rotary tools to securely grip bits and burs.

This drum is required to use a sanding sleeve with a Dremel grinder. Slide a sleeve on the drum and tighten the screw to expand the drum to securely hold the sleeve. Install the shank into the grinder’s collet.

Attach these guides to your Dremel to cut circular holes in a variety of materials. They come with a straightedge cutting guide.

Pair with Dremel rotary tools to cut holes, slots, and shapes in workpieces. These bits are good for use on a variety of materials including wood, plastic, and soft metal.

Buff, polish, and clean with these kits.

Convert your rotary tool into a plunge router to route circles, route freehand, and cut decorative edges, straight slots, and inlay work.

Screw these hangers onto your workbench.

Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your Dremel rotary tool.

Pair with Dremel rotary tools to polish, deburr, and remove rust from metal surfaces such as tools, machine parts, and electrical contacts.

The quick-change arbors in these kits allow you to easily swap accessories.

Turn Dremel rotary tools into miniature drill presses. These attachments tilt up to 90 degrees in either direction—in 15-degree increments—for drilling holes at an angle. You can also use them to position tools horizontally, so you can hold workpieces with both hands while polishing and sanding.

Pair with Dremel rotary tools to sharpen, deburr, and grind metal surfaces.

Pair with Dremel rotary tools to shape and smooth wood, fiberglass, and rubber surfaces. These sleeves also remove rust from metal.

For engraving and carving, these kits contain a variety of Dremel-compatible bits and stones.

Convert your rotary tool into a small router table to slot, edge, groove, and sand items in both conventional and irregular shapes. These attachments easily mount to any tabletop workspace.