ANSI/ASSP A10.8 Scaffolds

Filter by

Platform Height

Length

Overall Height

Overall Width

Overall Length

Width

Plank Tread

Material

Weight Capacity

1,000 lb. to 1,999 lb.

Ladder Type

Scaffold

Component

Add-On Height Section

Base Plate

Base Section

End Guardrail/Toeboard

Guardrail

Guardrail/Toeboard Kit

Specifications Met

Plank Length

Color

Wheel Configuration

Brake Type

Height

Assembly

Finish

Height Adjustment Increments

9 7/8"

12"

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Rail Material

65 Products

Uneven Surface Scaffolds


Shown Assembled

Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height. You can change the plank height in 4" increments; use the spring-loaded pins to lock it in place.

Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Scaffolds also meet CAL-OSHA standards, which is required for use in California.

Base Sections

Base sections have positioning guides that hold the plank within the frame. Sections roll on four locking swivel casters; install base plates (sold separately) when used on stairs. Do not stack more than two add-on height sections per base section.

		Plank		Overall
	Platform Ht.	Lg., ft.	Wd.	Lg., ft.	Wd.	Ht.	Wt. Cap., lb.	Color	Wheel Configuration	Brake Type	No. of Wheel Brakes	Assembly	Includes	Specs. Met		Each
Powder-Coated Steel



		76"	6	28 1/2"	6	29 1/2"	79"	1,000	Yellow	Four Swivel Casters	Wheel Brake	4	Unassembled	Plywood Plank Two End Frames with Adjustable Legs	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1646 OSHA Compliant 29 CFR 1910.29	8069T12	0000000


		76"	8	28 1/2"	8	29 1/2"	78"	1,000	Yellow	Four Swivel Casters	Wheel Brake	4	Unassembled	Plywood Plank Two End Frames with Adjustable Legs	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1646 OSHA Compliant 29 CFR 1910.29	8069T19	000000

Casters

Wheel		Stem
5"	1 1/8"	6 1/4"	250	5/8"	2"	Rubber	Swivel with Brake	8069T25	000000

Add-On Height Sections

			Cap., lb.
	Overall Lg., ft.	Ht.	with One Add-On Ht. Section	with Two Add-On Ht. Sections	Color	Assembly	Includes	Specs. Met		Each
Powder-Coated Steel



		6	72"	850	700	Yellow	Unassembled	Plywood Plank Two End Frames	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1646 OSHA Compliant 29 CFR 1910.29	8069T17	0000000


		8	72"	850	700	Yellow	Unassembled	Plywood Plank Two End Frames	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1646 OSHA Compliant 29 CFR 1910.29	8069T21	000000

Guardrail/Toeboard Kits

Guardrail/toeboard kits are required by OSHA when add-on height sections are used.

	Guardrail Ht.	Toeboard Ht.	Color	Assembly	Specs. Met		Each
Powder-Coated Steel



	6	40"	3"	Yellow	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1646 OSHA Compliant 29 CFR 1910.29	8069T14	0000000


	8	40"	4"	Yellow	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1646 OSHA Compliant 29 CFR 1910.29	8069T22	000000

Base Plates

Lg.	Specs. Met		Each



4 5/8"	4 5/8"	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451	8069T31	000000

Outriggers

Outriggers are required by OSHA when add-on height sections are used. They extend the base by 20" per side.

Brake Type	No. of Wheel Brakes	Includes	Specs. Met		Each



Four Swivel Casters	Wheel Brake	4	Four Outriggers	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451	8069T18	0000000

Adjustable Scaffolds

These scaffolds provide the space and height to complete elevated projects that most work platforms can't reach. Height adjusts in 2" increments. Powder-coated steel means these scaffolds can be used outdoors and in damp areas.

Note: Scaffolds meet OSHA dimensional standards and CAL-OSHA standards for use in California. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices.

		Plank		Overall
	Platform Ht., ft.	Lg., ft.	Wd.	Lg.	Wd.	Ht.	Wt. Cap., lb.	Guardrail Ht.	Toeboard Ht.	Color	Wheel Configuration	Brake Type	No. of Wheel Brakes	Assembly	Features	Includes	Specs. Met		Each
Powder-Coated Steel



		2 to 6	6	29"	72"	29"	66" to 114"	1,000	42"	6"	Yellow	Four Swivel Casters	Wheel Brake	4	Unassembled	Locking Pin	Guardrail Guardrail Posts Plywood Plank Two End Frames Two Horizontal Braces	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1621 Cal/OSHA Compliant Title 8 Section 1646 OSHA Compliant 29 CFR 1926.450 OSHA Compliant 29 CFR 1926.451	8064T11	0000000

Folding Scaffolds


	Folded

Fold these scaffolds for easy transport and storage. Height adjusts in 12" increments. Tighten the back brace bolts to lock the plank in place. Planks are grit coated for good slip resistance.

You are responsible for adhering to local, state, and federal safety codes, including OSHA.

		Plank		Overall			Folded
	Platform Ht.	Lg.	Wd.	Lg.	Wd.	Ht.	Lg.	Wd.	Ht.	Wt. Cap., lb.	Color	Wheel Configuration	Brake Type	No. of Wheel Brakes	Assembly	Includes	Specs. Met		Each
Powder-Coated Steel



		12" to 48"	51"	10"	51"	24"	51"	4"	24"	51"	400	Yellow	Four Swivel Casters	Wheel Brake	4	Unassembled	Two Grit-Coated Steel Planks	ANSI/ASSP A10.8 OSHA Compliant 29 CFR 1926.451	8064T52	0000000

Aluminum Scaffold Planks

Aluminum is a good choice for damp areas and outdoor use. Hooks with a 2"opening at each end secure planks to end frames. Rungs on the underside are for use as hand grips. Planks have a perforated surface for slip resistance and to reduce debris buildup. End hooks are offset to allow for continuous planking of large scaffolds.

Note: Length is measured from center-to-center of end hooks.

Note: Planks meet OSHA and Cal/OSHA dimensional and construction standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe set-up and operating practices.

					Rail
Lg., ft.	Wd.	Ht.	Wt. Cap., lb.	Plank Tread	Ht.	Material	Wt., lb.	Assembly	Features	Specs. Met		Each
7	19 1/16"	3"	250	Perforated	3"	Aluminum	25	Unassembled	2" End Hooks	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.451, UL 1322	8180T24	0000000
8	19 1/16"	4"	250	Perforated	4"	Aluminum	34	Unassembled	2" End Hooks	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.451, UL 1322	8180T23	000000
10	19 1/16"	4"	250	Perforated	4"	Aluminum	43	Unassembled	2" End Hooks	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.451, UL 1322	8180T25	000000

Easy-Adjust Scaffolds

Turn the winch on these scaffolds to adjust the platform height from two to eleven feet in 6" increments. Plank has a perforated surface for good slip resistance. Spring-loaded pins lock it in place. Scaffold can be assembled by one person without tools.

Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Base Sections

	Plank		Overall
	Lg.	Wd.	Ht. (A)	Lg.	Wd.	Platform Ht. (B), ft.	Guardrail Ht.	Color	Wt. Cap., lb.	Wheel Configuration	No. of Wheel Brakes	Assembly	Includes	Specs. Met		Each
Painted Steel



		68"	19"	118 1/4" to 172"	76 1/2"	31 1/2" to 72"	2 to 11	43"	Yellow	550	Four Swivel Casters	4	Unassembled	Beam Assembly Guardrail Perforated Steel Plank Safety Chains Two Diagonal Braces Two End Frames	ANSI/ASSP A10.8 ASME B30.19 OSHA Compliant 29 CFR 1910.29 OSHA Compliant 29 CFR 1926.450	8004T11	000000000

Planks, Guardrails, and Toeboards

Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards. They also work well between trestles, ladder jacks, and ladder scaffolding supports. Rungs on the underside are for use as hand grips.

Note: Planks, guardrails, and toeboards meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Planks, guardrails, and toeboards also meet CAL-OSHA standards, which is required for use in California.

Planks

Planks have a slip-resistant surface for sure footing. The vinyl end caps protect against sharp edges and act as hand grips.

									500 lb. Capacity		750 lb. Capacity
	Lg., ft.	Ht.	Wt., lb.	Material	Plank Tread	Mounting Hardware Included	Assembly	Specs. Met		Each		Each
14" Wide



		8	4"	27	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T63	0000000	———	0


		12	4"	40	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T65	000000	———	0
		16	5"	58	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T67	000000	———	0
		20	6"	85	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T73	00000000	———	0


		20" Wide



				8	4"	33	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T41	000000	———	0


				12	4"	48	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T42	000000	———	0
				16	5"	70	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T43	000000	———	0
				20	6"	102	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T44	00000000	———	0
				24	6"	121	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T45	00000000	———	0


				24" Wide



						8	4"	38	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T51	000000	———	0


						12	4"	56	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T52	000000	———	0
						16	5"	81	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T53	000000	———	0
						20	6"	115	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T54	00000000	———	0
						24	6"	138	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T55	00000000	———	0


						28" Wide



								8	4"	41	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T31	000000	———	0


								12	4"	60	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T32	000000	———	0
								12	4"	71	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	———	0	8265T12	0000000
								16	5"	103	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	———	0	8265T14	00000000
								20	5"	128	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	———	0	8265T16	00000000
								20	6"	124	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T34	00000000	———	0
								24	6"	147	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	7962T35	00000000	———	0
								24	6"	161	Aluminum	Smooth	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	———	0	8265T17	00000000

Guardrails

Guardrails mount to either side of the plank with the upper rails 38" to 42" above the plank surface.

Material	Mounting Hardware Included	Assembly	Includes	Specs. Met		Each



8	Aluminum	Yes	Unassembled	Midrail Vertical Posts	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T81	0000000


12	Aluminum	Yes	Unassembled	Midrail Vertical Posts	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T82	000000
16	Aluminum	Yes	Unassembled	Midrail Vertical Posts	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T13	000000
20	Aluminum	Yes	Unassembled	Midrail Vertical Posts	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T83	000000
24	Aluminum	Yes	Unassembled	Midrail Vertical Posts	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T15	000000

Toeboards

Toeboards mount to either side of the plank. They clamp to guardrail posts.

Toeboard Ht.	Material	Mounting Hardware Included	Assembly	Specs. Met		Each



8	3 1/2"	Aluminum	No	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T21	000000


12	3 1/2"	Aluminum	No	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T22	000000
16	3 1/2"	Aluminum	No	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T23	000000
20	3 1/2"	Aluminum	No	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T24	000000
24	3 1/2"	Aluminum	No	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T25	000000

End Guardrails/Toeboards

Toeboard Ht.	Material	Mounting Hardware Included	Assembly	Specs. Met		Each



20", 24", 28"	3 1/2"	Aluminum	Yes	Unassembled	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 OSHA Compliant 29 CFR 1926.451 UL 1322	8266T27	0000000

Plywood Scaffold Planks

The most commonly used and cost-effective planking for scaffolding walkways. Install three of these planks side-by-side to create a full platform atop standard 5 ft. wide scaffold frames. Hooks with a 2" opening at each end secure these planks to end frames. Their plywood walking surface can be replaced with standard _5/8" thick plywood when worn.

Note: Length is measured from center-to-center of end hooks.

Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

					Rail
Lg., ft.	Wd.	Ht.	Wt. Cap., lb.	Plank Tread	Ht.	Material	Wt., lb.	Assembly	Features	Specs. Met		Each
7	19"	4"	1,000	Smooth	4"	Aluminum	34	Assembled	2" End Hooks	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.451	8180T16	0000000
8	19"	4"	750	Smooth	4"	Aluminum	42	Assembled	2" End Hooks	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.451	8180T17	000000
10	19"	4"	1,000	Smooth	4"	Aluminum	46	Assembled	2" End Hooks	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.451	8180T18	000000

Extension Planks

Shown Partially Extended

Adjust the length of these planks to create a work platform on ladder jacks, trestle ladders, and other supports. The surface is ribbed to prevent slipping.

Note: Planks that have OSHA or Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe setup and operating practices.

250 lb. Capacity—250 lb. capacity planks are for one person. A spring-set lock secures them at the length you choose.

500 lb. Capacity—500 lb. capacity planks hold two people at a time. They hook onto your supports with rung locks, which keep the plank from slipping off or changing length while you work.

	Plank Tread	Lg. Adjustment Increments	Wt., lb.	Assembly	Features	Specs. Met		Each
250 lb. Capacity







	Aluminum

	6 to 9	14"	2"	Ribbed	12"	31	Unassembled	Spring-Set Lock	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.1053, UL 1322	7947T41	0000000


	8 to 13	14"	2"	Ribbed	12"	41	Unassembled	Spring-Set Lock	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.1053, UL 1322	7947T42	000000
	10 to 17	14"	2"	Ribbed	12"	57	Unassembled	Spring-Set Lock	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.1053, UL 1322	7947T43	000000


	500 lb. Capacity







					Aluminum

					6 to 9	13"	3"	Ribbed	—	33	Assembled	Rung Lock	ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322	7947T111	000000


					8 to 13	13"	4"	Ribbed	—	39	Assembled	Rung Lock	ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322	7947T112	000000
					9 to 15	13"	4"	Ribbed	—	44	Assembled	Rung Lock	ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322	7947T113	000000

Multifunction Workbench Adjustable Scaffolds

Scaffolding


Storage Rack	Utility Cart

Miter Saw Stand (Saw not Included)

Save space with a rolling scaffold that doubles as a workbench. These scaffolds can be used as a miter saw stand, a storage rack, a utility cart—or as scaffolding. Made of powder-coated steel, they're both rust resistant and durable for industrial use. Height adjusts in 2" increments.

Note: Scaffolds meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

	Scaffolds																Replacement Casters
		Plank		Overall
	Platform Ht.	Lg.	Wd.	Lg., ft.	Wd.	Ht.	Wt. Cap., lb.	Color	Wheel Configuration	Brake Type	No. of Wheel Brakes	Assembly	Includes	Specs. Met		Each		Each
Powder-Coated Steel



		25 1/8" to 73"	67"	29"	6	30 1/2"	37" to 74"	1,100	Yellow	Four Swivel Casters	Wheel Brake	4	Unassembled	Reversible Plywood Plank/Miter Saw Stand Storage Rack Two End Frames with Adjustable Legs Two Horizontal Braces	ANSI/ASSP A10.8 Cal/OSHA Compliant Title 8 Section 1637 Cal/OSHA Compliant Title 8 Section 1646 Cal/OSHA Compliant Title 8 Section 3622 Cal/OSHA Compliant Title 8 Section 3627 OSHA Compliant 29 CFR 1926.451	9305N101	0000000	9305N102	000000

Nonconductive Folding Scaffolds


Access Door Shown Open	Folded

Made of fiberglass, these scaffolds are nonconductive, so they’re commonly used in substations, server rooms, and near electrical systems. They’re also lightweight and resist corrosion. When space is limited, use the plank’s access door to safely climb from the inside. The plank is grit-coated to prevent slipping. When not in use, they fold for compact storage.

Note: Scaffolds meet OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

	Scaffolds																				Replacement Casters
		Plank		Overall			Folded
	Platform Ht.	Lg.	Wd.	Lg.	Wd.	Ht.	Lg.	Wd.	Ht.	Wt. Cap., lb.	Color	Wheel Configuration	Brake Type	No. of Wheel Brakes	Assembly	Features	Includes	Specs. Met		Each		Each
Fiberglass



		17" to 46"	74"	24"	76"	27"	78"	11"	27"	78"	475	Orange/Yellow	Four Swivel Casters	Wheel Brake	4	Unassembled	Access Door	Cross Brace Grit-Coated Fiberglass Plank Guardrail Two End Frames with Adjustable Legs	ANSI/ASSP A10.8 OSHA Compliant 29 CFR 1926.451	9303N101	000000000	9303N102	000000

Plywood Scaffold Planks with Access Door

Safely climb inside your scaffold when surrounding space is tight. These planks have an access door that swings open to reach your work platform. They’re made of plywood—the most commonly used and cost-effective planking material for scaffolds. Hooks at each end secure these planks to end frames. Length is measured from center-to-center of the end hooks.

Note: Planks meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Use an additional plank (sold separately) to create a platform that spans a standard 5 ft. wide scaffold. They do not include an access door.

Scaffold Planks													Additional Planks
					Rail
Lg., ft.	Wd.	Ht.	Wt. Cap., lb.	Plank Tread	Ht.	Material	Wt., lb.	Assembly	Features	Specs. Met		Each		Each
7	28"	3 1/2"	1,200	Smooth	3 1/2"	Aluminum	43	Assembled	2" End Hooks, Access Door	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.451	8104N13	0000000	8104N11	0000000
10	28"	4 1/2"	1,100	Smooth	4 1/2"	Aluminum	55	Assembled	2" End Hooks, Access Door	ANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.451	8104N14	000000	8104N12	000000

Wheel				Stem
Dia.	Wd.	Mount Ht.	Wt. Cap. per Caster, lb.	Dia.	Lg.	Wheel/Tread Material	Caster Type		Each
5"	1 1/8"	6 1/4"	250	5/8"	2"	Rubber	Swivel with Brake	8069T25	000000