McMaster-Carr logo
    Filter by
    Ladder Type
    Brake Type
    Plank Tread
    Height Adjustment Increments
    Wheel Configuration
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    58 Products

    Uneven Surface Scaffolds

    Image of System. Shown Assembled. Front orientation. Contains Annotated. Scaffolds. Uneven Surface Scaffolds.
    Image of ProductInUse. Front orientation. Contains Border. Scaffolds. Uneven Surface Scaffolds.

    Shown Assembled

    Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height. You can change the plank height in 4" increments; use the spring-loaded pins to lock it in place.
    Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Scaffolds also meet CAL-OSHA standards, which is required for use in California.
    Base Sections
    Base sections have positioning guides that hold the plank within the frame. Sections roll on four locking swivel casters; install base plates (sold separately) when used on stairs. Do not stack more than two add-on height sections per base section.
    Plank
    Overall
    Platform
    Ht.
    Lg.,
    ft.
    Wd.
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Wheel
    Configuration
    Brake Type
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel
    76"628 1/2"629 1/2"79"1,000YellowFour Swivel CastersWheel Brake4UnassembledPlywood Plank
    Two End Frames with Adjustable Legs    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T120000000
    76"828 1/2"829 1/2"78"1,000YellowFour Swivel CastersWheel Brake4UnassembledPlywood Plank
    Two End Frames with Adjustable Legs    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T19000000
     
    Casters
    Wheel
    Stem
    Dia.
    Wd.
    Mount
    Ht.
    Wt. Cap. per
    Caster, lb.
    Dia.
    Lg.
    Wheel/Tread
    Material
    Caster Type
    Each
    5"1 1/8"6 1/4"2505/8"2"Rubber
    		Swivel with Brake8069T25000000
    Add-On Height Sections
    Cap., lb.
    Overall
    Lg., ft.
    Ht.
    with One Add-On
    Ht. Section
    with Two Add-On
    Ht. Sections
    Color
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel
    672"850700YellowUnassembledPlywood Plank
    Two End Frames    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T170000000
    872"850700YellowUnassembledPlywood Plank
    Two End Frames    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T21000000
     
    Guardrail/Toeboard Kits
    Guardrail/toeboard kits are required by OSHA when add-on height sections are used.
    Overall
    Lg., ft.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Color
    Assembly
    Specs. Met
    Each
    Powder-Coated Steel
    640"3"YellowUnassembledANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T140000000
    840"4"YellowUnassembledANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29    		8069T22000000
     

    Adjustable Scaffolds

    Image of Product. Front orientation. Scaffolds. Adjustable Scaffolds.
    These scaffolds provide the space and height to complete elevated projects that most work platforms can't reach. Height adjusts in 2" increments. Powder-coated steel means these scaffolds can be used outdoors and in damp areas.
    Note: Scaffolds meet OSHA dimensional standards and CAL-OSHA standards for use in California. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices.
    Plank
    Overall
    Platform
    Ht., ft.
    Lg.,
    ft.
    Wd.
    Lg.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Color
    Wheel
    Configuration
    Brake Type
    No. of Wheel
    Brakes
    Assembly
    Features
    Includes
    Specs. Met
    Each
    Powder-Coated Steel
    2 to 6629"72"29"66" to 114"1,00042"6"YellowFour Swivel CastersWheel Brake4UnassembledLocking PinGuardrail
    Guardrail Posts
    Plywood Plank
    Two End Frames
    Two Horizontal Braces    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1621
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.450
    OSHA Compliant 29 CFR 1926.451    		8064T110000000
     

    Build-Your-Own Scaffolds

    Image of System. Front orientation. Contains Annotated, Inset. Scaffolds. Build-Your-Own Scaffolds.
    Mix and match these components to build a scaffold that suits your job. All components are compatible with each other, but they can’t be combined with other scaffold systems. They can be used indoors or outdoors. Add scaffold inspection tags to show whether a scaffold is under construction or ready for use.
    Note: Scaffold components meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    End Frames
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, End Frames, Step-Through with Ladder Frame.
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, End Frames, Walk-Through Frame.
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, End Frames, Walk-Through with Ladder Frame.

    Step-Through with

    Ladder Frame

    Walk-Through Frame

    Walk-Through with

    Ladder Frame

    Start building your scaffold with end frames. They have pins with locking arms welded to each side for attaching braces. End frames on the same level must be the same height.
    Walk-Through Frame and Walk-Through with Ladder Frame—Walk-through frames have almost 6 ft. of clearance in the middle so you can pass underneath.
    Clearance
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    OD
    Color
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel
     
    Step-Through with Ladder Frame
    —60"36"8,3001 11/16"BlueAssembledConnecting PinsCal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N13000000
    —60"60"5,1001 11/16"BlueAssembledConnecting PinsCal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N11000000
    —60"76"3,3001 11/16"BlueAssembledConnecting PinsCal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N12000000
     
    Walk-Through Frame
    69"60"76"4,0001 11/16"BlueAssembledConnecting PinsCal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N15000000
     
    Walk-Through with Ladder Frame
    69"60"76"4,0001 11/16"BlueAssembledConnecting PinsCal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N14000000
     
    Accessories for Scaffolds
    Pig Tail Pins
    Image of Product. Pig Tail Pin. Front orientation. Scaffold Locking Pins. Build-Your-Own Scaffolds, Pig Tail Pin.

    Pig Tail Pin

    Pins are used to join components together.
    Pig tail and toggle pins fit through a hole in a coupling pin and a frame to lock them together. You can also use them to secure posts to end frames.
    Each
    Package
    Pin
    Type
    Material
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Pig TailGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517587N1100000257587N12000000
    Toggle Pins
    Image of Product. Toggle Pin. Front orientation. Scaffold Locking Pins. Build-Your-Own Scaffolds, Toggle Pin.

    Toggle Pin

    Pins are used to join components together.
    Pig tail and toggle pins fit through a hole in a coupling pin and a frame to lock them together. You can also use them to secure posts to end frames.
    Each
    Package
    Pin
    Type
    Material
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    ToggleGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517587N1300000257587N14000000
    Leveling Jack Feet
    Image of Product. Front orientation. Jacks. Build-Your-Own Scaffolds.
    Leveling jack feet create a stable foundation for your scaffold on uneven ground. They adjust in increments less than an inch, so you can set each leg of your scaffold to the exact height you need. You’ll need at least four—one for each corner of the scaffold.
    Hollow—Hollow feet are lighter in weight than solid feet, so they’re easier to handle.
    Solid—Solid feet support heavier loads than hollow feet.
    Overall
    Base
    Thread
    Base Mounting
    Construction
    Wt. Cap.,
    lb.
    Max.
    Lift
    Ht.
    Wd.
    Lg.
    Wd.
    Wt.,
    lb.
    Material
    Size
    Lg.
    Fasteners
    Included
    No.
    of
    Hole
    Dia.
    Hole
    Ctr.-to-Ctr.
    Specs. Met
    Each
    Hollow5,30018"24"9 3/8"5 5/16"5 5/16"6Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N11000000
    Solid15,50018"24"9 3/8"5 5/16"5 5/16"11Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N1200000
    Planks
    Image of Product. Front orientation. Scaffold Planks. Build-Your-Own Scaffolds, Plywood.
    Image of Product. Front orientation. Scaffold Planks. Build-Your-Own Scaffolds, Plywood, Access Door.

    Plywood

    Plywood

    Access Door

    Image of Product. Front orientation. Scaffold Planks. Build-Your-Own Scaffolds, Aluminum.

    Aluminum

    Use planks to create a platform. For each level of your scaffold, you’ll need either three planks that are 19" or 19 1/16" wide or two planks that are 28" wide. Fit the hooks on each end onto your frame to secure them in place. To create a level walking surface, use planks that are all the same size and material.
    Plywood—Plywood planks have an aluminum frame and plywood walking surface. When the walking surface wears out, you can replace it with a sheet of 5/8" thick plywood—just cut it to fit the frame.
    Aluminum—Aluminum planks hold up to wear and moisture better than plywood planks.
    Access Door—Planks with an access door let you climb down through the platform when you’re in tight spots.
    Rail
    Wd.
    Ht.
    Features
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Specs. Met
    Each
    Plywood
     
    7 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		34AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T160000000
    28"3 1/2"2" End Hooks1,200Smooth3 1/2"Aluminum
    		39AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N11000000
    28"3 1/2"2" End Hooks, Access Door1,200Smooth3 1/2"Aluminum
    		43AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N13000000
     
    10 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		46AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T18000000
    28"4 1/2"2" End Hooks1,100Smooth4 1/2"Aluminum
    		54AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N12000000
    28"4 1/2"2" End Hooks, Access Door1,100Smooth4 1/2"Aluminum
    		55AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N14000000
     
    Aluminum
     
    7 ft. Long
    19 1/16"3"2" End Hooks250Perforated3"Aluminum
    		25UnassembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.451, UL 13228180T24000000
     
    10 ft. Long
    19 1/16"4"2" End Hooks250Perforated4"Aluminum
    		43UnassembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, OSHA Compliant 29 CFR 1926.451, UL 13228180T25000000
     
    Guardrails
    Image of Product. Front orientation. Scaffold Guardrails. Build-Your-Own Scaffolds.
    Install guardrails on your platform to help prevent falls. Slip each end of a guardrail over the pins on a post.
    Mounting
    Lg.,
    ft.
    OD
    Wt.,
    lb.
    Material
    Hardware
    Included
    No.
    of
    Hole
    Dia.
    Specs. Met
    Each
    End Rails
    51"3Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N11000000
     
    Side Rails
    71"5Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1200000
    101 1/4"9Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1300000
     
    Cross Braces
    Image of ProductInUse. Braces. Front orientation. Contains Annotated. Scaffolds. Build-Your-Own Scaffolds, Cross Braces.
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Cross Braces.

    Braces

    Use braces to secure end frames together. The ends of each brace fit over the pins on an end frame, and a locking arm secures them in place.
    For every pair of end frames, you’ll need two cross braces—one for each side of the scaffold.
    For
    Frame
    Mounting
    Ht.
    Wd.
    For Plank
    Lg., ft.
    Wd.
    Ht.
    OD
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    Galvanized Steel
    36"60"784"24"1"49/16"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N19000000
    36"60"10120"24"1"49/16"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N1800000
    60", 76"60"784"48"1"49/16"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N1700000
    60", 76"60"10120"48"1"49/16"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N16000000
     
    Bottom Diagonal Braces
    Image of ProductInUse. Braces. Front orientation. Contains Annotated. Scaffolds. Build-Your-Own Scaffolds, Bottom Diagonal Braces.
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Bottom Diagonal Braces.

    Braces

    Use braces to secure end frames together. The ends of each brace fit over the pins on an end frame, and a locking arm secures them in place.
    If your platform is over 10 ft. high, add a bottom diagonal brace on the lowest level. Also known as gooser braces, they connect two opposite corners to add stability and keep your scaffold square.
    For
    Frame
    Mounting
    Ht.
    Wd.
    For Plank
    Lg., ft.
    Lg.
    OD
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    Galvanized Steel
    36", 60", 76"60"784"1"29/16"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N22000000
    36", 60", 76"60"1010"1"29/16"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N2100000
     
    Pins
    Image of Product. Coupling Pin. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Pins, Coupling Pin.
    Image of Product. Spring Clip Pin. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Pins, Spring Clip Pin.

    Coupling

    Pin

    Spring Clip Pin

    Pins are used to join components together.
    Both a coupling pin and spring clip pin are needed to secure end frames together as you stack them. They’re also used to secure posts to end frames.
    Pin Type
    Lg.
    Specs. Met
    Each
    Galvanized Steel
    Coupling9"Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N2900000
    Spring Clip—Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N310000
     
    Base Plates
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Base Plates.
    Use base plates to create a stationary foundation for the scaffold. You’ll need at least four—one for each corner of the scaffold.
    Base
    Base Mounting
    Lg.
    Wd.
    Color
    Fasteners
    Included
    No. of
    Holes
    Hole
    Dia.
    Hole
    Ctr.-to-Ctr.
    Specs. Met
    Each
    Powder-Coated Steel
    6"6"BlueNo47/16"4"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N26000000
     
    Casters
    Image of Product. Caster Shown Installed with Adjusting Screw and Toggle Pin (Sold Separately). Front orientation. Scaffolds. Build-Your-Own Scaffolds, Casters.
    Image of Product. Casters. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Casters.

    Caster

    Shown

    Installed

    with

    Adjusting

    Screw and

    Toggle Pin

    (Sold

    Separately)

    Casters

    For a mobile scaffold, use casters as the base. You’ll need at least four—one for each corner of the scaffold.
    Wheel
    Stem
    Dia.
    Wd.
    Mount
    Ht.
    Wt. Cap. per
    Caster, lb.
    Dia.
    Lg.
    For Pin
    Dia.
    Wheel/Tread
    Material
    Brake/Lock Type
    No. of Mounting
    Holes
    Specs. Met
    Each
    7 7/8"2"9"7501 3/8"3 15/16"3/8"Rubber
    		Wheel Brake and Swivel Lock (Total Lock)1Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N27000000
     
    Adjusting Screws
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Adjusting Screws.
    Add an adjusting screw between your frame and a base plate or caster (both sold separately) to level the scaffold on uneven ground. Twist the nut to raise or lower a scaffold leg to the exact height you need.
    Hollow—Hollow screws are lighter in weight than solid screws, so they’re easier to handle.
    Solid—Solid screws support heavier loads than hollow screws.
    Overall
    Thread
    Wd.
    Ht.
    Construction
    Max.
    Lift
    Wt. Cap.,
    lb.
    Size
    Lg.
    Wt.,
    lb.
    Specs. Met
    Each
    Galvanized Steel
    9 3/8"28 1/4"Hollow22 1/4"5,3001 3/8"-4
    		15 1/2"6Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N24000000
    9 3/8"28 1/4"Solid22 1/4"6,8001 3/8"-4
    		15 1/2"11Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N2500000
     
    Posts
    Image of Product. Posts. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Posts.

    Posts

    Add posts to a platform to support guardrails. They have welded pins that hold the guardrails in place. Attach the base of each post to your end frame with a coupling pin, a spring clip pin, and either a pig tail or a toggle pin (all sold separately).
    Mounting
    Ht.
    OD
    Color
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Wt.,
    lb.
    Specs. Met
    Each
    Powder-Coated Steel
    60"1 11/16"BlueNo17/16"11Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N23000000
     
    Toeboards
    Image of Product. Toeboards. Front orientation. Contains Annotated. Scaffolds. Build-Your-Own Scaffolds, Toeboards.
    Image of Product. Toeboards. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Toeboards.

    Toeboards

    Toeboards

    Use toeboards to create a raised edge around the platform so you don’t accidentally knock tools off the side.
    Ht.
    Lg.,
    ft.
    Wt.,
    lb.
    Specs. Met
    Each
    Galvanized Steel
    6"511Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N32000000
    6"1020Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N3400000
    6"8414Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8742N3300000
     
    Outriggers
    Image of Product. Front orientation. Contains Annotated. Scaffolds. Build-Your-Own Scaffolds, Outriggers.
    Image of Product. Front orientation. Scaffolds. Build-Your-Own Scaffolds, Outriggers.
    If your scaffold is 20 ft. or taller, use outriggers to extend the base and increase stability. You’ll need a base plate or caster on the end of each outrigger—attach them with a toggle or pig tail pin (all sold separately). You can also use leveling jack feet. You’ll also need a cross brace (sold separately) to join each pair of outriggers and keep them square. The outriggers have welded pins for mounting cross braces.
    Mounting
    Wd.
    Ht.
    Color
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    Powder-Coated Steel
    33"51 1/4"BlueNo17/16"Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		8742N280000000
     

    Scaffold Clamps

    Image of ProductInUse. Front orientation. Scaffold Clamps. Scaffold Clamps, Rigid.
    Image of ProductInUse. Front orientation. Scaffold Clamps. Scaffold Clamps, Swivel.

    Rigid

    Swivel

    Build tube-and-clamp scaffolding and attach supports, such as railings, to frame-style structures. Also known as knuckles. These clamps fit the most common scaffold tube sizes. Made of galvanized steel, they are rust resistant and hold up in outdoor applications.
    Rigid—Rigid clamps create a secure 90° connection between two tubes.
    Swivel—Swivel clamps pivot to connect tubes at any angle.
    Specifications Met—Clamps meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    For OD
    Movement
    Inch
    Metric,
    mm
    No. of Through
    Holes
    Material
    Drive Style
    Hex Size,
    mm
    Specs. Met
    Each
    Rigid1 5/8" to 1 7/8"42 to 482Galvanized SteelExternal Hex
    		22Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4519421N101000000
    Swivel1 5/8" to 1 7/8"42 to 482Galvanized SteelExternal Hex
    		22Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4519421N10200000

    Plywood Scaffold Planks

    Image of Product. Front orientation. Scaffold Planks. Plywood Scaffold Planks.
    Image of Attribute. Side1 orientation. Contains Annotated. Scaffold Planks. Plywood Scaffold Planks.
    The most commonly used and cost-effective planking for scaffolding walkways. Install three of these planks side-by-side to create a full platform atop standard 5 ft. wide scaffold frames. Hooks with a 2" opening at each end secure these planks to end frames. Their plywood walking surface can be replaced with standard 5/8" thick plywood when worn.
    Note: Length is measured from center-to-center of end hooks.
    Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Rail
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Features
    Specs. Met
    Each
    719"4"1,000Smooth4"Aluminum
    		34Assembled2" End HooksANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T160000000
    819"4"750Smooth4"Aluminum
    		42Assembled2" End HooksANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T17000000
    1019"4"1,000Smooth4"Aluminum
    		46Assembled2" End HooksANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T18000000

    Scaffold Leveling Jacks

    Image of ProductInUse. Front orientation. Jacks. Scaffold Leveling Jacks.
    Image of Product. Front orientation. Jacks. Scaffold Leveling Jacks.
    Swap these jacks with the base plates on your scaffold to create a level foundation on uneven ground. They adjust in increments less than an inch, so you can set each leg of your scaffold to the exact height you need. Made from galvanized steel, these jacks resist rust and hold up to outdoor use. For safety and stability, the top 6" of the threaded stud slides into the scaffold frame and isn’t usable.
    Note: Leveling jacks meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Hollow—Hollow jacks are lighter in weight than solid jacks, so they’re easier to handle.
    Overall
    Base
    Thread
    Base Mount
    Wt. Cap.,
    lb.
    Max.
    Lift
    Ht.
    Wd.
    Lg.
    Wd.
    For
    ID
    Material
    Size
    Lg.
    Fasteners
    Included
    No. of
    Holes
    Hole
    Dia.
    Hole
    Ctr.-to-Ctr.
    Wt.,
    lb.
    Specs. Met
    Each
    Hollow
    5,30018"24"9 3/8"5 5/16"5 5/16"1 1/2"Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"6Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N11000000
     
    Solid
    15,50018"24"9 3/8"5 5/16"5 5/16"1 1/2"Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"11Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N1200000
     

    Tower Scaffolds

    Image of ProductInUse. Braces. Front orientation. Contains Annotated. Scaffolds. Tower Scaffolds.

    Braces

    Image of Product. Front orientation. Scaffolds. Tower Scaffolds, Caster Foot.
    Image of Product. Posts. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Front orientation. Scaffolds. Tower Scaffolds, Leveling Foot.

    Caster Foot

    Posts

    Leveling Foot

    Image of Product. Bottom Diagonal Braces. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Coupling Pins. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Toeboards. Front orientation. Contains Annotated. Scaffolds. Tower Scaffolds.

    Bottom Diagonal Braces

    Coupling

    Pins

    Toeboards

    Image of Product. End Frames. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Spring Clip. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Cross Braces. Front orientation. Scaffolds. Tower Scaffolds.

    End Frames

    Spring Clip

    Cross Braces

    Image of Product. Toeboards. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Casters. Front orientation. Scaffolds. Tower Scaffolds.

    Toeboards

    Casters

    Everything you need to build a tower scaffold. These kits include braces, end frames, guardrail posts, rails, plywood planks, and connecting pins. All scaffolds are made of powder-coated steel, so they’re rust resistant and durable for outdoor use. Use scaffold inspection tags to mark when a scaffold is ready to use or still being built.
    Note: Tower scaffolds meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Add toeboards (sold separately) to keep tools and materials from sliding off your platform.
    Caster Foot—Scaffolds with casters can be moved easily.
    Leveling Foot—Scaffolds with leveling feet can be adjusted for stability on uneven surfaces. Raise or lower each foot up to 18" to create a level platform.
    Overall
    Platform
    Ht.
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Brake/Lock Type
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel—With Caster Feet
    130"765 1/2"139"2,500BlueFour Swivel Casters4Wheel Brake and Swivel Lock (Total Lock)UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T112000000000
    130"1065 1/2"139"3,000BlueFour Swivel Casters4Wheel Brake and Swivel Lock (Total Lock)UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T11400000000
     
    Powder-Coated Steel—With Leveling Feet
    128"765 1/2"176"2,500Blue———UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T11100000000
    128"1065 1/2"176"3,500Blue———UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T11300000000
     
    Accessories and Replacements for Scaffolds
    End Frames
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    OD
    Material
    Color
    Assembly
    Specs. Met
    Each
    Step-Through with Ladder Frame
    60"60"5,1001 11/16"Powder-Coated SteelBlueAssembledCal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N110000000
     
    Braces
    Mounting
    Holes
    For Plank
    Lg., ft.
    Lg.
    Wd.
    Ht.
    OD
    Material
    No.
    of
    Dia.
    Specs. Met
    Each
    Cross Braces
    7—84"48"1"Galvanized Steel49/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N17000000
    10—120"48"1"Galvanized Steel49/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N16000000
     
    Bottom Diagonal Braces
    784"——1"Galvanized Steel29/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2200000
    1010"——1"Galvanized Steel29/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2100000
     
    Coupling Pins
    Pin
    Type
    Material
    Specs. Met
    Each
    CouplingGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2900000
    Pig Tail Pins
    Image of Product. Pig Tail. Front orientation. Scaffold Locking Pins. Tower Scaffolds.

    Pig Tail

    Each
    Package
    Pin
    Type
    Material
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Pig TailGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517587N1100000257587N12000000
    Spring Clip Pins
    Pin Type
    Material
    Specs. Met
    Each
    Spring ClipGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N3100000
    Casters
    Wheel
    Stem
    Dia.
    Wd.
    Mount
    Ht.
    Wt. Cap. per
    Caster, lb.
    Dia.
    Lg.
    For Pin
    Dia.
    Wheel/Tread
    Material
    Brake/Lock Type
    Specs. Met
    Each
    7 7/8"2"9"7501 3/8"3 15/16"3/8"Rubber
    		Wheel Brake and Swivel Lock (Total Lock)Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N27000000
    Leveling Jack Feet
    Image of Product. Front orientation. Jacks. Tower Scaffolds.
    Overall
    Base
    Thread
    Base Mounting
    Construction
    Wt. Cap.,
    lb.
    Max.
    Lift
    Ht.
    Wd.
    Lg.
    Wd.
    Wt.,
    lb.
    Material
    Size
    Lg.
    Fasteners
    Included
    No.
    of
    Hole
    Dia.
    Hole
    Ctr.-to-Ctr.
    Specs. Met
    Each
    Hollow5,30018"24"9 3/8"5 5/16"5 5/16"6Galvanized Steel1 3/8"-4
    		16 9/16"No41/2"3 5/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517819N11000000
    Planks
    Image of Product. Front orientation. Scaffold Planks. Tower Scaffolds.
    Rail
    Wd.
    Ht.
    Features
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Specs. Met
    Each
    Plywood
     
    7 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		34AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T160000000
     
    10 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		46AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T18000000
     
    Posts
    Mounting
    Ht.
    OD
    Wt.,
    lb.
    Material
    Color
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    60"1 11/16"11Powder-Coated SteelBlueNo17/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N23000000
    Guardrails
    Image of Product. Front orientation. Scaffold Guardrails. Tower Scaffolds.
    Mounting
    Lg.,
    ft.
    OD
    Wt.,
    lb.
    Material
    Hardware
    Included
    No.
    of
    Hole
    Dia.
    Specs. Met
    Each
    End Rails
    51"3Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N11000000
     
    Side Rails
    71"5Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1200000
    101 1/4"9Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1300000
     
    Toeboards
    Toeboards—Add toeboards to keep tools and materials from sliding off your platform.
    Lg.,
    ft.
    Ht.
    Wt.,
    lb.
    Material
    Specs. Met
    Each
    56"11Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N32000000
    106"20Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N3400000
    846"14Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N3300000

    Motorized Adjustable Scaffolds

    Image of Product. Front orientation. Scaffolds. Motorized Adjustable Scaffolds.
    Move these scaffolds between work areas without climbing down from the platform. They have a pair of motorized wheels that you control with a joystick. When you stop moving, the motor locks them to keep these scaffolds in place. The steel frame is durable enough to withstand heavy use, and it’s powder-coated to prevent rust. Holes every 2" let you adjust the platform to the height you need. To prevent slips, the walking surface is coated in grit. These scaffolds also have an access door, so you can climb down through the platform when you’re in tight spots.
    Use a standard 20V battery (not included) to power the motor. It comes with adapters for most power tool battery packs.
    Note: These scaffolds meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe operating practices. They’re designed to be driven on level surfaces, and don’t exceed the OSHA-required maximum speed of 1 foot per second. The enclosed guardrails meet fall-protection requirements.
    Scaffolds
    Replacement
    Casters
    Plank
    Overall
    Guardrail
    Ht.
    Toeboard
    Ht.
    Lg.
    Wd.
    Ht.
    Lg.
    Wd.
    Wt. Cap.,
    lb.
    Color
    Max. Speed,
    mph
    Range,
    ft.
    Batteries
    Included
    For Battery Voltage,
    V DC
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Each
    Powder-Coated Steel
     
    29" to 71" Platform Height
    41"4"67"29"92" to 118"76"31"500Red0.684,500No18, 20Four Swivel Casters4UnassembledCord Grips
    Grit-Coated Plywood Plank
    Guardrail
    Guardrail Posts
    Joystick
    Motorized Wheel Assembly
    Two End Frames
    Two Horizontal Braces    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    OSHA Compliant 29 CFR 1926.451    		9415N110000000009415N12000000
     

    Scaffold Guardrails

    Image of ProductInUse. Front orientation. Contains Annotated. Scaffold Guardrails.
    Image of Product. Front orientation. Scaffold Guardrails.
    Add a barrier around your scaffold platform to prevent falls. These guardrails attach to posts (not included) on the edge of your platform. You can also replace sections of an existing barrier to make sure your scaffold meets safety requirements. Made of galvanized steel, these guardrails resist rust and hold up to outdoor use.
    Note: Guardrails meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Mounting
    Lg.,
    ft.
    OD
    Material
    Wt.,
    lb.
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    End Rails
    51"Galvanized Steel3No29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N11000000
     
    Side Rails
    71"Galvanized Steel5No29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1200000
    101 1/4"Galvanized Steel9No29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1300000
     

    Multifunction Workbench Adjustable Scaffolds

    Image of ProductInUse. Scaffolding. Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.

    Scaffolding

    Image of Product. Storage Rack. Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.
    Image of Product. Utility Cart. Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.

    Storage Rack

    Utility Cart

    Image of Product. Miter Saw Stand (Saw not Included). Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.

    Miter Saw Stand (Saw not Included)

    Save space with a rolling scaffold that doubles as a workbench. These scaffolds can be used as a miter saw stand, a storage rack, a utility cart—or as scaffolding. Made of powder-coated steel, they're both rust resistant and durable for industrial use. Height adjusts in 2" increments.
    Note: Scaffolds meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Scaffolds
    Replacement
    Casters
    Plank
    Overall
    Platform Ht.
    Lg.
    Wd.
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Wheel
    Configuration
    Brake Type
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Each
    Powder-Coated Steel
    25 1/8" to 73"67"29"630 1/2"37" to 74"1,100YellowFour Swivel CastersWheel Brake4UnassembledReversible Plywood Plank/Miter Saw Stand
    Storage Rack
    Two End Frames with Adjustable Legs
    Two Horizontal Braces    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1926.451    		9305N10100000009305N102000000
     

    Scaffold Locking Pins

    Image of Product. Pig Tail Pin. Front orientation. Scaffold Locking Pins. Pig Tail Pin.

    Pig Tail Pin

    Image of Product. Toggle Pin. Front orientation. Scaffold Locking Pins. Toggle Pin.

    Toggle Pin

    Fasten coupling pins, base plates, guardrail posts, and other components to scaffold frames. They replace missing pins on your scaffold frame to help you comply with OSHA safety requirements. Made of galvanized steel, they resist rust and hold up to outdoor use.
    Pig Tail Pin—Pig-tail pins have a curved arm that wraps around the frame. They’re also known as gravity pins.
    Toggle Pin—Toggle pins have a hinged arm that flips down against the frame to lock the pin in place. They’re also known as hinge pins.
    Cal/OSHA Compliant Title 8 Section 1646 and OSHA Compliant 29 CFR 1926.451—Pins meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Each
    Package
    Dia.
    Lg.
    Usable
    Lg.
    For OD
    Material
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Pig Tail Pin
    1/4"2 3/4"—1 11/16"Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517587N1100000257587N12000000
     
    Toggle Pin
    3/8"3 7/8"2 3/4"—Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517587N130000257587N1400000
     

    Plywood Scaffold Planks with Access Door

    Image of Product. Front orientation. Scaffold Planks. Plywood Scaffold Planks with Access Door.
    Image of Attribute. Side1 orientation. Contains Annotated. Scaffold Planks. Plywood Scaffold Planks with Access Door.
    Safely climb inside your scaffold when surrounding space is tight. These planks have an access door that swings open to reach your work platform. They’re made of plywood—the most commonly used and cost-effective planking material for scaffolds. Hooks at each end secure these planks to end frames. Length is measured from center-to-center of the end hooks.
    Note: Planks meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Use an additional plank (sold separately) to create a platform that spans a standard 5 ft. wide scaffold. They do not include an access door.
    Scaffold Planks
    Additional
    Planks
    Rail
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Features
    Specs. Met
    Each
    Each
    728"3 1/2"1,200Smooth3 1/2"Aluminum
    		43Assembled2" End Hooks, Access DoorANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N1300000008104N110000000
    1028"4 1/2"1,100Smooth4 1/2"Aluminum
    		55Assembled2" End Hooks, Access DoorANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N140000008104N12000000
    back to top