McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    33 Products

    Overhead Access Work Platforms

    Image of ProductInUse. Front orientation. Work Platforms. Overhead Access Work Platforms.
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Overhead Access Work Platforms.
    Roll these platforms into place to access the tops of machinery, trucks, or tanks. They provide a stable surface to reach elevated or hard-to-access areas during maintenance. Unlike rolling scaffolds, these platforms have open guardrails on one side for direct access to equipment.
    A serrated platform prevents slipping and allows liquids and debris to pass through. Height adjusts in 4" increments.
    Yellow—They’re bright yellow to stand out in busy areas.
    Powder-Coated Steel—Made of powder-coated steel, these platforms are rust resistant and durable.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Replacement Jacks—Use jacks to level the platform on uneven ground.
    Platforms
    Replacement
    Swivel Casters
    Replacement
    Jacks
    Platform
    Overall
    Steps
    Ht. (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht. (D)
    Wd.
    (E)
    Dp.
    (F)
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    Guardrail
    Ht.
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Each
    Each
    Yellow Powder-Coated Steel
     
    Serrated Step
    103" to 115"120"24"145" to 157"152"50"103" to 115"1024"1 1/2"45042"Four Swivel Casters4UnassembledFour Outriggers, Four Screw JacksCal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3282, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D9215N1110000000009215N11200000009215N1130000000
     

    Extension Planks

    Image of Product. Shown Partially Extended. Front orientation. Extension Planks.

    Shown Partially Extended

    Adjust the length of these planks to create a work platform on ladder jacks, trestle ladders, and other supports. The surface is ribbed to prevent slipping.
    Note: Planks that have OSHA or Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe setup and operating practices.
    250 lb. Capacity—250 lb. capacity planks are for one person. A spring-set lock secures them at the length you choose.
    Lg.,
    ft.
    Wd.
    Ht.
    Plank
    Tread
    Lg. Adjustment
    Increments
    Wt.,
    lb.
    Assembly
    Features
    Specs. Met
    Each
    250 lb. Capacity
     
    Aluminum
    6 to 914"2"Ribbed12"31UnassembledSpring-Set LockANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.1053, UL 13227947T410000000
    8 to 1314"2"Ribbed12"41UnassembledSpring-Set LockANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.1053, UL 13227947T42000000
    10 to 1714"2"Ribbed12"57UnassembledSpring-Set LockANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.1053, UL 13227947T43000000
     

    Multifunction Workbench Adjustable Scaffolds

    Image of ProductInUse. Scaffolding. Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.

    Scaffolding

    Image of Product. Storage Rack. Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.
    Image of Product. Utility Cart. Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.

    Storage Rack

    Utility Cart

    Image of Product. Miter Saw Stand (Saw not Included). Front orientation. Scaffolds. Multifunction Workbench Adjustable Scaffolds.

    Miter Saw Stand (Saw not Included)

    Save space with a rolling scaffold that doubles as a workbench. These scaffolds can be used as a miter saw stand, a storage rack, a utility cart—or as scaffolding. Made of powder-coated steel, they're both rust resistant and durable for industrial use. Height adjusts in 2" increments.
    Note: Scaffolds meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Scaffolds
    Replacement
    Casters
    Plank
    Overall
    Platform Ht.
    Lg.
    Wd.
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Wheel
    Configuration
    Brake Type
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Each
    Powder-Coated Steel
    25 1/8" to 73"67"29"630 1/2"37" to 74"1,100YellowFour Swivel CastersWheel Brake4UnassembledReversible Plywood Plank/Miter Saw Stand
    Storage Rack
    Two End Frames with Adjustable Legs
    Two Horizontal Braces    		ANSI/ASSP A10.8
    Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1926.451    		9305N10100000009305N102000000
     

    Tower Scaffolds

    Image of ProductInUse. Braces. Front orientation. Contains Annotated. Scaffolds. Tower Scaffolds.

    Braces

    Image of Product. Front orientation. Scaffolds. Tower Scaffolds, Caster Foot.
    Image of Product. Posts. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Bottom Diagonal Braces. Front orientation. Scaffolds. Tower Scaffolds.

    Caster Foot

    Posts

    Bottom Diagonal Braces

    Image of Product. Coupling Pins. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Toeboards. Front orientation. Contains Annotated. Scaffolds. Tower Scaffolds.
    Image of Product. End Frames. Front orientation. Scaffolds. Tower Scaffolds.

    Coupling

    Pins

    Toeboards

    End Frames

    Image of Product. Spring Clip. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Cross Braces. Front orientation. Scaffolds. Tower Scaffolds.
    Image of Product. Toeboards. Front orientation. Scaffolds. Tower Scaffolds.

    Spring Clip

    Cross Braces

    Toeboards

    Image of Product. Casters. Front orientation. Scaffolds. Tower Scaffolds.

    Casters

    Everything you need to build a tower scaffold. These kits include braces, end frames, guardrail posts, rails, plywood planks, and connecting pins. All scaffolds are made of powder-coated steel, so they’re rust resistant and durable for outdoor use. Use scaffold inspection tags to mark when a scaffold is ready to use or still being built.
    Note: Tower scaffolds meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Add toeboards (sold separately) to keep tools and materials from sliding off your platform.
    Caster Foot—Scaffolds with casters can be moved easily.
    Overall
    Platform
    Ht.
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Color
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Brake/Lock Type
    Assembly
    Includes
    Specs. Met
    Each
    Powder-Coated Steel—With Caster Feet
    130"765 1/2"139"2,500BlueFour Swivel Casters4Wheel Brake and Swivel Lock (Total Lock)UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T112000000000
    130"1065 1/2"139"3,000BlueFour Swivel Casters4Wheel Brake and Swivel Lock (Total Lock)UnassembledBottom Diagonal Brace
    Connecting Pins
    Four Cross Braces
    Four End Frames
    Four End Rails
    Four Guardrail Posts
    Four Side Rails
    Three Plywood Planks    		Cal/OSHA Compliant Title 8 Section 1637
    Cal/OSHA Compliant Title 8 Section 1646
    Cal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1910.29
    OSHA Compliant 29 CFR 1926.451    		8187T11400000000
     
    Accessories and Replacements for Scaffolds
    End Frames
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    OD
    Material
    Color
    Assembly
    Specs. Met
    Each
    Step-Through with Ladder Frame
    60"60"5,1001 11/16"Powder-Coated SteelBlueAssembledCal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N110000000
     
    Braces
    Mounting
    Holes
    For Plank
    Lg., ft.
    Lg.
    Wd.
    Ht.
    OD
    Material
    No.
    of
    Dia.
    Specs. Met
    Each
    Cross Braces
    7—84"48"1"Galvanized Steel49/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N17000000
    10—120"48"1"Galvanized Steel49/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N16000000
     
    Bottom Diagonal Braces
    784"——1"Galvanized Steel29/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2200000
    1010"——1"Galvanized Steel29/16"Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2100000
     
    Coupling Pins
    Pin
    Type
    Material
    Specs. Met
    Each
    CouplingGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N2900000
    Pig Tail Pins
    Image of Product. Pig Tail. Front orientation. Scaffold Locking Pins. Tower Scaffolds.

    Pig Tail

    Each
    Package
    Pin
    Type
    Material
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Pig TailGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4517587N1100000257587N12000000
    Spring Clip Pins
    Pin Type
    Material
    Specs. Met
    Each
    Spring ClipGalvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N3100000
    Casters
    Wheel
    Stem
    Dia.
    Wd.
    Mount
    Ht.
    Wt. Cap. per
    Caster, lb.
    Dia.
    Lg.
    For Pin
    Dia.
    Wheel/Tread
    Material
    Brake/Lock Type
    Specs. Met
    Each
    7 7/8"2"9"7501 3/8"3 15/16"3/8"Rubber
    		Wheel Brake and Swivel Lock (Total Lock)Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518742N27000000
    Planks
    Image of Product. Front orientation. Scaffold Planks. Tower Scaffolds.
    Rail
    Wd.
    Ht.
    Features
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Specs. Met
    Each
    Plywood
     
    7 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		34AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T160000000
     
    10 ft. Long
    19"4"2" End Hooks1,000Smooth4"Aluminum
    		46AssembledANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.4518180T18000000
     
    Posts
    Mounting
    Ht.
    OD
    Wt.,
    lb.
    Material
    Color
    Hardware
    Included
    No. of
    Holes
    Hole
    Dia.
    Specs. Met
    Each
    60"1 11/16"11Powder-Coated SteelBlueNo17/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N23000000
    Guardrails
    Image of Product. Front orientation. Scaffold Guardrails. Tower Scaffolds.
    Mounting
    Lg.,
    ft.
    OD
    Wt.,
    lb.
    Material
    Hardware
    Included
    No.
    of
    Hole
    Dia.
    Specs. Met
    Each
    End Rails
    51"3Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N11000000
     
    Side Rails
    71"5Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1200000
    101 1/4"9Galvanized SteelNo29/16"Cal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4517665N1300000
     
    Toeboards
    Toeboards—Add toeboards to keep tools and materials from sliding off your platform.
    Lg.,
    ft.
    Ht.
    Wt.,
    lb.
    Material
    Specs. Met
    Each
    56"11Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N32000000
    106"20Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N3400000
    846"14Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.4518742N3300000

    Plywood Scaffold Planks with Access Door

    Image of Product. Front orientation. Scaffold Planks. Plywood Scaffold Planks with Access Door.
    Image of Attribute. Side1 orientation. Contains Annotated. Scaffold Planks. Plywood Scaffold Planks with Access Door.
    Safely climb inside your scaffold when surrounding space is tight. These planks have an access door that swings open to reach your work platform. They’re made of plywood—the most commonly used and cost-effective planking material for scaffolds. Hooks at each end secure these planks to end frames. Length is measured from center-to-center of the end hooks.
    Note: Planks meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Use an additional plank (sold separately) to create a platform that spans a standard 5 ft. wide scaffold. They do not include an access door.
    Scaffold Planks
    Additional
    Planks
    Rail
    Lg.,
    ft.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Plank
    Tread
    Ht.
    Material
    Wt.,
    lb.
    Assembly
    Features
    Specs. Met
    Each
    Each
    728"3 1/2"1,200Smooth3 1/2"Aluminum
    		43Assembled2" End Hooks, Access DoorANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N1300000008104N110000000
    1028"4 1/2"1,100Smooth4 1/2"Aluminum
    		55Assembled2" End Hooks, Access DoorANSI/ASSP A10.8, Cal/OSHA Compliant Title 8 Section 1637, Cal/OSHA Compliant Title 8 Section 1646, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1926.4518104N140000008104N12000000
    back to top