Take your maintenance and repair tasks to new heights—these scissor lifts were built for reliability. Each part has been inspected and tested to ensure these lifts remain in service for over a decade. They’re designed to minimize hydraulic connections and cylinders to reduce failure points. Powered by a brushless motor, there’s no need for regular maintenance. Even the operation is no fuss—a single joystick controls both driving and elevation.

Their compact size and tight turning radius let you navigate through standard doorways and crowded spaces. Suitable for indoor and outdoor use, they’re made of powder-coated steel parts—even the pins and screws—and have waterproof connectors that stand up to the elements. Pothole guards keep them from tipping on uneven surfaces.

The platform supports up to 500 lbs. and is wide enough for two people to work comfortably side-by-side. Guardrails on each side meet fall-protection requirements. With three fall-restraint tie-off points, you have additional spots to anchor fall protection gear.

Note: Check local, state, and federal codes, including OSHA, for safe operating practices. Do not operate these lifts in winds over 25 mph. When used outdoors, only one person should be on them at a time.

Use one to three springs (included) to automatically maintain a convenient ergonomic working height based on the load. A built-in damper provides smooth and gradual raising and lowering without bounce. The turntable rotates 360° to reduce reaching. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.

Warning: Not for lifting. Never use to support people.

Collapse these lift tables and carry them like a briefcase. Made of lightweight aluminum, they weigh just 30 lbs. so they’re easy to store, transport in a vehicle, and carry up or down stairs. Lower the platform, fold down the push handle, and pick them up with the built-in side handle. And since they’re aluminum, they also resist corrosion in wet environments. Use the foot lever and hydraulic pump to raise or lower loads to your ideal height.

Warning: Never use to lift people.

Transport loads over gravel, cracked concrete, grass, and other uneven terrain. These tables have large pneumatic tires that support heavy loads and absorb more shock than standard solid rubber wheels. Use them indoors and outdoors.

Multiple tie-down rings on the frame let you secure loads with straps or bungees to keep them from sliding. Store tools, parts, or small items in the compartment below the handle. A foot lever and hydraulic pump raise the load. To lower the load, use either the hand or foot valve.

Warning: Never use to lift people.

These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.

Warning: Not for lifting. Never use to support people.

Eliminate an extra lift—these lift tables weigh and count right from the lifting platform. They have a built-in scale, so they’re useful for inventory and shipping tasks. A check-weigh mode flags when an item falls outside your set weight range. In counting mode, these tables track inventory as you add and remove parts. A large digital display shows your measurements. Use the foot lever and hydraulic pump to raise loads to your ideal height. And turn the knob for controlled lowering.

Warning: Never use to lift people.

Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.

Warning: Never use to lift people.

Bellows—Bellows protect the working parts of the table from dust, dirt, and debris.

Powered for driving and lifting, these tables take the effort out of positioning heavy loads. The powered drive makes them ideal for moving loads long distances in your facility. A throttle controls forward and reverse movement, while a battery-powered hydraulic pump raises and lowers loads with the push of a button. Adjust the speed to match the pace of your task. Compared to manual lift trucks, these tables offer greater control and more precise adjustments.

Top to bottom, these tables are outfitted with safety features. When they back up, a beeper sounds to alert people nearby. An emergency stop button immediately halts movement. If you release the control or the table is stationary, an automatic brake engages to prevent unintended movement on inclines or uneven surfaces.

The front casters are pneumatic and shock absorbent, while the rear wheels are made of polyurethane and resist abrasion. All wheels are nonmarking. These tables come with a charging cord—just plug it into a standard wall outlet.

Get lower to the ground than with our other mobile lift tables. Just roll a pallet truck to the edge of these tables to slide a pallet into place—no ramps or forklifts needed. Use the foot lever and hydraulic pump to raise loads to your ideal height. Turn the hand knob for controlled lowering. Swivel casters with brakes make steering and positioning easy.

Warning: Never use to lift people.