McMaster-Carr logo
    Filter by
    Screw Diameter
    Shaft Diameter
    Edge Thickness
    DFARS Specialty Metals
    Industrial Info Compare
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Maximum Temperature
    For Screwdriving Operation
    Screw Pick-Up Rate
    Signal Output
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    151 Products

    Screw Conveyors

    Add on to an existing screw conveyor or keep it running like new.
    Screws
    Image of Product. Front orientation. Screw Conveyors. Screws.
    Screws are designed for right-hand operation. Screws with a thicker edge offer longer service life for abrasive materials.
    Screw
    Dia.
    Lg.
    Edge
    Thk.
    Shaft
    Dia.
    Pitch
    Each
    Steel
    4"118 1/2"3/16"1"4"5866K5210000000
    6"118"1/16"1 1/2"6"5866K21000000
    9"118"3/16"1 1/2"9"5866K24000000
    9"118"3/16"2"9"5866K25000000
    12"141"3/16"2 7/16"12"5866K2700000000
    12"142"3/16"2"12"5866K2600000000
    14"141"1/8"2 7/16"14"5866K28000000
     
    Stainless Steel
    4"118 1/2"3/16"1"4"5866K51800000000
    6"118"—1 1/2"6"5866K88100000000
    9"118"—1 1/2"9"5866K88200000000
    9"118"3/16"2"9"5866K51900000000
    12"141"3/16"2 7/16"12"5866K51600000000
    12"142"—2"12"5866K88300000000
    14"141"3/16"2 7/16"14"5866K51700000000
     
    Troughs
    Image of Product. Front orientation. Screw Conveyors. Troughs.
    For Screw
    Dia.
    Lg.,
    ft.
    Each
    Steel
    4"105866K5130000000
    6"105866K45000000
    9"105866K46000000
    12"125866K6200000000
    14"125866K7100000000
     
    Stainless Steel
    4"105866K50800000000
    6"105866K88400000000
    9"105866K88600000000
    12"125866K88500000000
    14"125866K50900000000
     
    Trough Covers
    Image of Product. Front orientation. Screw Conveyors. Trough Covers.
    For Screw
    Dia.
    Lg.,
    ft.
    For Shaft
    Dia.
    Includes
    Each
    Steel
    4"10——5866K5010000000
    6"10—10 Cover Clamps, Rubber Seal5866K64000000
    9"10—10 Cover Clamps, Rubber Seal5866K65000000
    12"12—10 Cover Clamps, Rubber Seal5866K67000000
    14"12—10 Cover Clamps, Rubber Seal5866K68000000
     
    Stainless Steel
    4"10——5866K503000000
    6"10——5866K504000000
    9"102"—5866K891000000
    12"122"—5866K892000000
    14"12——5866K502000000
     
    Extra-Cover Clamps
    Image of Product. Front orientation. Screw Conveyors. Extra-Cover Clamps.
    Material
    Each
    Steel5866K63000000
    Stainless Steel
    		5866K52700000
    Discharge Spouts
    Image of Product. Front orientation. Screw Conveyors. Discharge Spouts.
    Discharge spouts can be welded to a cutout in the trough.
    For Screw
    Dia.
    For Shaft
    Dia.
    Each
    Steel
    4"—5866K5240000000
    6"—5866K81000000
    9"—5866K82000000
    12"—5866K83000000
    14"—5866K84000000
     
    Stainless Steel
    4"—5866K523000000
    6"1 1/2"5866K923000000
    9"2"5866K924000000
    12"2"5866K925000000
    14"—5866K522000000
     
    Coupling Shafts
    Image of Product. Front orientation. Screw Conveyors. Coupling Shafts.
    Coupling shafts connect two screws together.
    For Shaft
    Dia.
    Each
    Steel
    1"5866K511000000
    1 1/2"5866K3500000
    2"5866K3600000
    2 7/16"5866K39000000
     
    Stainless Steel
    1"5866K506000000
    1 1/2"5866K914000000
    2"5866K915000000
    2 7/16"5866K916000000
    3"5866K917000000
     
    End Shafts
    Image of Product. Front orientation. Screw Conveyors. End Shafts.
    End shafts support the end conveyor section.
    For Shaft
    Dia.
    Each
    Steel
    1"5866K515000000
    1 1/2"5866K5100000
    2"5866K5200000
    2 7/16"5866K53000000
     
    Stainless Steel
    1"5866K514000000
    1 1/2"5866K918000000
    2"5866K919000000
    2 7/16"5866K921000000
    3"5866K922000000
     
    Coupling Bolts
    Image of Product. Front orientation. Screw Conveyors. Coupling Bolts.
    Coupling bolts connect shafts to the screw.
    For Shaft
    Dia.
    Pkg.
    Qty.
    Pkg.
    Steel
    1"45866K526000000
    1 1/2"45866K3700000
    2"45866K3800000
    2 7/16"45866K4200000
     
    Stainless Steel
    1"15866K52500000
    1 1/2"15866K92800000
    2"15866K92900000
    2 7/16"15866K93100000
    3"15866K93200000
     
    End-Shaft Seals
    Image of Product. Front orientation. Screw Conveyors. End-Shaft Seals.
    End-shaft seals prevent material contamination and discharge.
    For Shaft
    Dia.
    Each
    Steel
    1"5866K5120000000
    1 1/2"5866K72000000
    2"5866K73000000
    2 7/16"5866K74000000
     
    Stainless Steel
    1"5866K507000000
    1 1/2"5866K935000000
    2"5866K936000000
    2 7/16"5866K937000000
    3"5866K938000000
     
    End-Shaft Bearings
    Image of Product. Front orientation. Screw Conveyors. End-Shaft Bearings.
    End-shaft bearings support the end of the shaft and help the screw rotate.
    For Shaft
    Dia.
    Each
    Steel
    1 1/2"5914K510000000
    2"5914K52000000
    2 7/16"5914K53000000
     
    Trough Ends
    Image of Product. Front orientation. Screw Conveyors. Trough Ends.
    For Screw
    Dia.
    For Shaft
    Dia.
    Each
    Steel
    4"1"5866K5330000000
    6"1 1/2"5866K11000000
    9"1 1/2"5866K12000000
    9"2"5866K13000000
    12"2"5866K14000000
    12"2 7/16"5866K15000000
    14"2 7/16"5866K16000000
     
    Stainless Steel
    4"1"5866K531000000
    6"1 1/2"5866K898000000
    9"1 1/2"5866K899000000
    9"2"5866K911000000
    12"2"5866K912000000
    12"2 7/16"5866K913000000
    14"2 7/16"5866K529000000
     
    Bearing Hangers
    Image of Product. Front orientation. Screw Conveyors. Bearing Hangers.
    Bearing hangers mount inside the trough.
    For Screw
    Dia.
    For Shaft
    Dia.
    Each
    Steel
    4"1"5866K5320000000
    6"1 1/2"5866K31000000
    9"1 1/2"5866K32000000
    9"2"5866K76000000
    12"2"5866K34000000
    12"2 7/16"5866K77000000
    14"2 7/16"5866K78000000
     
    Stainless Steel
    4"1"5866K528000000
    6"1 1/2"5866K893000000
    9"1 1/2"5866K894000000
    9"2"5866K895000000
    12"2"5866K896000000
    12"2 7/16"5866K897000000
    14"2 7/16"5866K505000000
     
    Bearings
    Image of Product. Front orientation. Screw Conveyors. Bearings.
    Hardwood—Hardwood bearings are oil impregnated and are often used in agricultural applications.
    Iron—Iron bearings are oil impregnated and offer longer life for abrasive materials.
    Bronze—Bronze bearings are oil impregnated.
    UHMW Polyethylene—UHMW bearings work well with chemicals and wet environments.
    For Screw
    Dia.
    For Shaft
    Dia.
    Max. Temp.,
    ° F
    Each
    Hardwood
    4"1"1505866K537000000
    6", 9"1 1/2"—5914K4400000
    9", 12"2"—5914K4500000
    12", 14"2 7/16"—5914K6100000
     
    Polyethylene
    4"1"2255866K534000000
     
    UHMW Polyethylene (FDA Compliant 21 CFR 177.1520)
    6", 9"1 1/2"—5914K4700000
    9", 12"2"—5914K4800000
    12", 14"2 7/16"—5914K6300000
     
    Iron
    4"1"5005866K53800000
    6", 9"1 1/2"—5914K7100000
    9", 12"2"—5914K7200000
    12", 14"2 7/16"—5914K73000000
     
    Bronze
    4"1"2255866K53500000000
    6", 9"1 1/2"8505914K35000000
    9", 12"2"8505914K37000000
    9", 12"2 7/16"8505866K536000000
     

    Screw Feeders

    Image of Product. For Manual Screwdriving Operation. Front orientation. Contains Inset. For Manual Screwdriving Operation.
    Image of Product. For Robotic Screwdriving Operation. Front orientation. Contains Inset. For Robotic Screwdriving Operation.

    For Manual Screwdriving Operation

    For Robotic Screwdriving Operation

    To speed up assembly lines, these feeders sort loose screws and hold them up one at a time. They present each screw headfirst, so it’s easy to pick them up with a screwdriver. These feeders are ready to use right out of the box—just pour screws into the hopper. They’re made for high-volume assembly, so they won’t jam even after extensive use.
    These feeders work with a variety of head types, including those with an extended flange or a lock washer. Use with either magnetic or nonmagnetic screws. Measure your screw’s length from under the head.
    For Manual Screwdriving Operation—Feeders for manual screwdriving operation have a V-shaped groove that guides the tip of your screwdriver to the screw.
    For Robotic Screwdriving Operation—Feeders for robotic screwdriving operation have a flat plate that gives automated equipment plenty of space to pick up the screw. You can integrate them with your robot so that they send a signal when the next screw is ready.
    For Screw
    Size
    Head Dia.
    Head Ht.
    Lg.
    Head Type
    Screw Pick-Up
    Rate, per sec.
    Voltage,
    V AC
    Each
    For Manual Screwdriving Operation
    No. 000, M1
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.063" to 0.394"
    1.6 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A1130000000
    No. 00, M1.2
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.075" to 0.394"
    1.9 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A114000000
    No. 00, No. 0, M1.4
    		0.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.087" to 0.394"
    2.2 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A115000000
    No. 0, No. 1, M1.70.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.106" to 0.394"
    2.7 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A116000000
    No. 1, M2
    		0.118" to 0.138"
    3 mm to 3.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.126" to 0.708"
    3.2 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A117000000
    No. 2, M2.3
    		0.13" to 0.157"
    3.3 mm to 4 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.146" to 0.708"
    3.7 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A118000000
    No. 3, M2.6
    		0.142" to 0.177"
    3.6 mm to 4.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.165" to 0.708"
    4.2 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A119000000
    No. 4, M3
    		0.157" to 0.217"
    4 mm to 5.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.189" to 0.708"
    4.8 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A121000000
    No. 6, M3.5
    		0.189" to 0.315"
    4.8 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.22" to 0.708"
    5.6 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A122000000
    No. 7, No. 8, M4
    		0.213" to 0.315"
    5.4 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.252" to 0.708"
    6.4 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A123000000
    No. 10, M5
    		0.244" to 0.394"
    6.2 mm to 10 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.315" to 0.708"
    8 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A124000000
     
    For Robotic Screwdriving Operation
    No. 000, M1
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.4 mm to 1 mm    		0.063" to 0.394"
    1.6 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A125000000
    No. 00, M1.2
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.4 mm to 1 mm    		0.075" to 0.394"
    1.9 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A126000000
    No. 00, No. 0, M1.4
    		0.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.087" to 0.394"
    2.2 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A127000000
    No. 0, No. 1, M1.70.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.106" to 0.394"
    2.7 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A128000000
    No. 1, M2
    		0.118" to 0.138"
    3 mm to 3.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.126" to 0.708"
    3.2 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A12900000000
    No. 2, M2.3
    		0.13" to 0.157"
    3.3 mm to 4 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.146" to 0.708"
    3.7 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13100000000
    No. 3, M2.6
    		0.142" to 0.177"
    3.6 mm to 4.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.165" to 0.708"
    4.2 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13200000000
    No. 4, M3
    		0.157" to 0.217"
    4 mm to 5.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.189" to 0.708"
    4.8 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13300000000
    No. 6, M3.5
    		0.189" to 0.315"
    4.8 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.22" to 0.708"
    5.6 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13400000000
    No. 7, No. 8, M4
    		0.213" to 0.315"
    5.4 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.252" to 0.708"
    6.4 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13500000000
    No. 10, M5
    		0.244" to 0.394"
    6.2 mm to 10 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.315" to 0.708"
    8 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13600000000
     
    back to top