McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    97 Products

    Screw Nails for Metal, Plastic, and Plywood

    Image of Product. Front orientation. Contains Annotated. Screw Nails. Screw Nails for Metal, Plastic, and Plywood.
    Also known as round-head Type U drive screws, these fasteners drive like nails but hold with screw-like strength. Use them in drilled and punched holes. The hole size should be slightly smaller than the shank diameter.
    Zinc-Plated Steel—Zinc-plated steel screw nails resist rust.
    18-8 Stainless Steel—18-8 stainless steel nails are chemical resistant and may be mildly magnetic.
    Screw
    Size
    Lg.
    Nail
    Ga.
    Shank
    Dia.
    Head
    Dia.
    Fastener
    Head Type
    Shank
    Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    No. 00
    1/8"16 Ga.
    0.06"3/32"Domed
    Screw100000000000000000
    No. 00
    3/16"16 Ga.
    0.06"3/32"Domed
    Screw1000000000000000
    No. 00
    1/4"16 Ga.
    0.06"3/32"Domed
    Screw1000000000000000
    No. 00
    3/8"16 Ga.
    0.06"3/32"Domed
    Screw10000000000000000
    No. 0
    1/8"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 0
    3/16"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 0
    1/4"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 0
    3/8"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 2
    1/8"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    3/16"12 Ga.
    0.1"5/32"Domed
    Screw10000000000000000
    No. 2
    1/4"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    5/16"12 Ga.
    0.1"5/32"Domed
    Screw10000000000000000
    No. 2
    3/8"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    1/2"12 Ga.
    0.1"5/32"Domed
    Screw10000000000000000
    No. 4
    3/16"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 4
    1/4"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 4
    5/16"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 4
    3/8"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 6
    1/4"10 Ga.
    0.14"1/4"Domed
    Screw1000000000000000
    No. 6
    5/16"10 Ga.
    0.14"1/4"Domed
    Screw1000000000000000
    No. 6
    3/8"10 Ga.
    0.14"1/4"Domed
    Screw1000000000000000
    No. 7
    5/16"9 Ga.
    0.15"9/32"Domed
    Screw1000000000000000
    No. 7
    3/8"9 Ga.
    0.15"9/32"Domed
    Screw1000000000000000
    No. 7
    1/2"9 Ga.
    0.15"9/32"Domed
    Screw1000000000000000
    No. 8
    1/4"8 Ga.
    0.17"5/16"Domed
    Screw1000000000000000
    No. 8
    3/8"8 Ga.
    0.17"5/16"Domed
    Screw1000000000000000
    No. 8
    1/2"8 Ga.
    0.17"5/16"Domed
    Screw1000000000000000
    No. 8
    5/8"8 Ga.
    0.17"5/16"Domed
    Screw1000000000000000
    No. 10
    3/8"7 Ga.
    0.18"11/32"Domed
    Screw1000000000000000
    No. 10
    1/2"7 Ga.
    0.18"11/32"Domed
    Screw10000000000000000
    No. 10
    5/8"7 Ga.
    0.18"11/32"Domed
    Screw1000000000000000
    No. 12
    1/2"6 Ga.
    0.21"13/32"Domed
    Screw1000000000000000
    No. 12
    3/4"6 Ga.
    0.21"13/32"Domed
    Screw10000000000000000
    No. 14
    1/2"4 Ga.
    0.24"7/16"Domed
    Screw10000000000000000
    No. 14
    3/4"4 Ga.
    0.24"7/16"Domed
    Screw10000000000000000
     
    18-8 Stainless Steel
    No. 00
    1/8"16 Ga.
    0.06"3/32"Domed
    Screw1000000000000000
    No. 00
    3/16"16 Ga.
    0.06"3/32"Domed
    Screw1000000000000000
    No. 00
    1/4"16 Ga.
    0.06"3/32"Domed
    Screw1000000000000000
    No. 00
    3/8"16 Ga.
    0.06"3/32"Domed
    Screw1000000000000000
    No. 0
    1/8"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 0
    3/16"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 0
    1/4"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 0
    3/8"14 Ga.
    0.08"1/8"Domed
    Screw1000000000000000
    No. 2
    1/8"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    3/16"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    1/4"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    5/16"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    3/8"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 2
    1/2"12 Ga.
    0.1"5/32"Domed
    Screw1000000000000000
    No. 4
    3/16"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 4
    1/4"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 4
    5/16"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 4
    3/8"11 Ga.
    0.12"7/32"Domed
    Screw1000000000000000
    No. 6
    1/4"10 Ga.
    0.14"1/4"Domed
    Screw1000000000000000
    No. 6
    5/16"10 Ga.
    0.14"1/4"Domed
    Screw1000000000000000
    No. 6
    3/8"10 Ga.
    0.14"1/4"Domed
    Screw1000000000000000
    No. 7
    5/16"9 Ga.
    0.15"9/32"Domed
    Screw1000000000000000
    No. 7
    3/8"9 Ga.
    0.15"9/32"Domed
    Screw1000000000000000
    No. 7
    1/2"9 Ga.
    0.15"9/32"Domed
    Screw1000000000000000
    No. 8
    1/4"8 Ga.
    0.17"5/16"Domed
    Screw1000000000000000
    No. 8
    3/8"8 Ga.
    0.17"5/16"Domed
    Screw1000000000000000
    No. 8
    1/2"8 Ga.
    0.17"5/16"Domed
    Screw1000000000000000
    No. 8
    5/8"8 Ga.
    0.17"5/16"Domed
    Screw10000000000000000
    No. 10
    3/8"7 Ga.
    0.18"11/32"Domed
    Screw1000000000000000
    No. 10
    1/2"7 Ga.
    0.18"11/32"Domed
    Screw10000000000000000
    No. 10
    5/8"7 Ga.
    0.18"11/32"Domed
    Screw10000000000000000
    No. 12
    1/2"6 Ga.
    0.21"13/32"Domed
    Screw10000000000000000
    No. 12
    3/4"6 Ga.
    0.21"13/32"Domed
    Screw10000000000000000
    No. 14
    1/2"4 Ga.
    0.24"7/16"Domed
    Screw10000000000000000
    No. 14
    3/4"4 Ga.
    0.24"7/16"Domed
    Screw10000000000000000
     

    Screw Nails for Sheet Metal

    Image of Product. Front orientation. Contains Annotated. Screw Nails. Screw Nails for Sheet Metal.
    Also known as flat-head Type 21 screws, these fasteners drive like nails but hold with screwlike strength. The zinc-plated finish provides rust resistance. Use them in drilled and punched holes. The hole size should be slightly smaller than the shank diameter.
    Lg.
    Nail
    Ga.
    Shank
    Dia.
    Head
    Dia.
    Fastener
    Head Type
    Shank
    Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/8"12 Ga.
    0.11"1/4"Flat
    Screw100000000000000000
    7/16"10 Ga.
    0.14"5/16"Flat
    Screw10000000000000000
    7/16"8 Ga.
    0.16"5/16"Flat
    Screw10000000000000000
    1/2"7 Ga.
    0.18"5/16"Flat
    Screw10000000000000000
     

    Nails for Hard Woods

    Image of Product. Front orientation. Nails. Nails for Hard Woods.
    Also known as spiral-shank nails, the shank turns as you drive, so these nails provide a strong hold in hard woods such as birch, oak, and maple.
    Steel—Steel nails are an economical choice with good strength.
    18-8 Stainless Steel—18-8 stainless steel nails have good corrosion resistance and may be mildly magnetic.
    Small Pack
    Large Pack
    Penny
    Size
    Lg.
    Nail
    Ga.
    Shank
    Dia.
    Head
    Dia.
    Fastener
    Head Type
    Shank
    Type
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Steel
    8d
    2 1/2"11 Ga.
    0.12"5/16"Flat
    Spiral10000000000000000500000000000000000
    16d
    3 1/2"9 Ga.
    0.15"5/16"Flat
    Spiral50000000000000025000000000000000
    20d
    4"7 Ga.
    0.18"3/8"Flat
    Spiral250000000000000———0
    40d
    5"6 Ga.
    0.2"1/2"Flat
    Spiral200000000000000———0
     
    18-8 Stainless Steel
    2d
    1"14 Ga.
    0.08"13/64"Flat
    Spiral———055000000000000000
    4d
    1 1/2"12 Ga.
    0.11"1/4"Flat
    Spiral20000000000000000———0
    6d
    2"11 Ga.
    0.12"17/64"Flat
    Spiral10000000000000000———0
    10d
    3"9 Ga.
    0.148"5/16"Flat
    Spiral6500000000000000———0
     

    Finishing Nails for Hard Woods

    Image of Product. Front orientation. Nails. Finishing Nails for Hard Woods.
    The flat head sits flush with the surface for a smooth, finished appearance. Also known as spiral-shank nails, the shank turns as you drive, so these nails provide a strong hold in hard woods such as birch, oak, and maple. The zinc-plated finish provides rust resistance.
    Lg.
    Nail
    Ga.
    Shank
    Dia.
    Head
    Dia.
    Fastener
    Head Type
    Shank
    Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/2"14 Ga.
    0.08"3/16"Flat
    Spiral10000000000000000
    3/4"13 Ga.
    0.09"1/4"Flat
    Spiral10000000000000000
    1"12 Ga.
    0.11"1/4"Flat
    Spiral10000000000000000
    1 1/4"11 Ga.
    0.12"1/4"Flat
    Spiral10000000000000000
    1 1/2"11 Ga.
    0.12"1/4"Flat
    Spiral10000000000000000
    2"10 Ga.
    0.14"5/16"Flat
    Spiral5000000000000000
    2 1/2"10 Ga.
    0.14"5/16"Flat
    Spiral5000000000000000
     

    Decorative Finishing Nails for Hard Woods

    Image of Product. Front orientation. Nails. Decorative Finishing Nails for Hard Woods.
    The domed head sits above the surface. Also known as spiral-shank nails, the shank turns as you drive, so these nails provide a strong hold in hard woods such as birch, oak, and maple. The zinc-plated finish provides rust resistance.
    Lg.
    Nail
    Ga.
    Shank
    Dia.
    Head
    Dia.
    Fastener
    Head Type
    Shank
    Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/2"14 Ga.
    0.08"3/16"Domed
    Spiral10000000000000000
    3/4"14 Ga.
    0.08"3/16"Domed
    Spiral10000000000000000
    1"14 Ga.
    0.08"3/16"Domed
    Spiral10000000000000000
    1"13 Ga.
    0.09"5/16"Domed
    Spiral10000000000000000
     

    Screw Nail Assortments

    Image of Product. Front orientation. Contains Annotated. Screw Nails. Screw Nail Assortments.
    Image of Product. Front orientation. Screw Nails. Screw Nail Assortments.
    Also known as round-head Type U drive screws. Drive these into drilled or punched holes like a nail and get the hold of a screw when fastening sheet metal, plastic, and plywood. Hole size should be slightly smaller than the shank diameter.
    Zinc-Plated Steel—Zinc-plated steel nails resist corrosion in wet environments.
    18-8 Stainless Steel—18-8 stainless steel nails are chemical resistant and may be mildly magnetic.
    No. of
    Pieces
    Screw Nails Included
    Container
    Type
    Each
    Zinc-Plated Steel
    1,200No. 0 × 1/4" Lg. (100 Pieces)
    No. 0 × 3/16" Lg. (100 Pieces)
    No. 2 × 1/4" Lg. (100 Pieces)
    No. 2 × 1/8" Lg. (100 Pieces)
    No. 2 × 3/16" Lg. (100 Pieces)
    No. 4 × 1/4" Lg. (100 Pieces)
    No. 4 × 3/16" Lg. (100 Pieces)
    No. 4 × 3/8" Lg. (100 Pieces)
    No. 4 × 5/16" Lg. (100 Pieces)
    No. 6 × 1/4" Lg. (100 Pieces)
    No. 6 × 3/8" Lg. (100 Pieces)
    No. 6 × 5/16" Lg. (100 Pieces)
    Plastic Box000000000000000
     
    18-8 Stainless Steel
    1,200No. 0 × 1/4" Lg. (100 Pieces)
    No. 0 × 3/16" Lg. (100 Pieces)
    No. 2 × 1/4" Lg. (100 Pieces)
    No. 2 × 1/8" Lg. (100 Pieces)
    No. 2 × 3/16" Lg. (100 Pieces)
    No. 4 × 1/4" Lg. (100 Pieces)
    No. 4 × 3/16" Lg. (100 Pieces)
    No. 4 × 3/8" Lg. (100 Pieces)
    No. 4 × 5/16" Lg. (100 Pieces)
    No. 6 × 1/4" Lg. (100 Pieces)
    No. 6 × 3/8" Lg. (100 Pieces)
    No. 6 × 5/16" Lg. (100 Pieces)
    Plastic Box000000000000000
     
    back to top