We will reply to your message within an hour.
The magnetic base attaches to any steel surface so you can position your pan where you need it. Drain holes in the bottom of the pan prevent dirt and moisture buildup.
Protect sensitive parts from electrostatic discharge.
An aluminized finish makes these pans corrosion resistant.
Sort small items without losing pieces, then pour the rest back into the container.
These durable pans are impact, wear, chemical, stain, and stick resistant.
Protect sensitive equipment from electrostatic discharge.
To keep items from sliding off, these pans have a molded-in, slip-resistant rubber surface. Often used in cafeterias and food-processing areas, they meet NSF/ANSI 2 standards for food equipment.
Often used in cafeterias and food-processing areas, these pans meet NSF/ANSI 2 standards for food equipment.
These lightweight pans have reinforced metal corners for durability and a coating that resists moisture, grease, and mild acids.
Made of 316 stainless steel, these pans offer the best resistance to corrosion and pitting.
Magnetized to hold metal tools and parts, these trays can be used right-side up, sideways, and even upside down.
Made of silicone, these trays bend to hug curves and cling to highly polished surfaces—keeping your tools right where you need them.
These durable plastic pans are impact, wear, chemical, stain, and stick resistant.
These pans have 1/8” diameter perforations on the sides and bottom to allow drainage and air flow.
The 1/4” diameter perforations on the sides and bottom allow drainage and air flow through these pans.
These boxes have durable hinges and are more shatter resistant than other compartmented boxes.
At 5/8" tall and under, these boxes fit in spaces other boxes can’t.
A rubber gasket provides a watertight seal.
These boxes have a coating on the dividers that protects metal parts from rust and corrosion.
Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.
Adjust the dividers to create the size and number of compartments that you need.
Handy on forklifts and scaffolding, these trays hang on square and rounded rails to keep tools and supplies waist height.
With a capacity of 150 lbs., these are our strongest vented tote boxes.
These tote boxes resist most chemicals, solvents, and oils.
Choose the box and number of dividers you need. The dividers fit into molded slots in the boxes to create compartments.
When used with a lid, these tote boxes protect contents from electrostatic discharge.
Place these boxes on top of each other to make the most of your storage or shipping space.
These boxes are made with an additive that protects sensitive contents from electrostatic discharge.
A rubber seal in the lid keeps water out.
Use a box as is, or snap on additional boxes to create a mobile storage system that fits your needs.
The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.
A lip on the back allows bin boxes to hang from rails or louvered panels.
A removable window allows 30% more capacity yet still lets you see what's in the box.
These bins dissipate static charges to protect sensitive contents from damage.
The ribbed wall design allows the bins to stack or nest.
Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A raised front and back prevents spills.
A tab on the back of the bin box allows it to be tilted from the shelf without falling.
These bins are very strong, with a capacity of 250 lbs. They're also chemical, solvent, and oil resistant.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A high front and back prevents spills.
These plastic bin boxes are more durable than cardboard bin boxes but are just as easy to assemble without tape, glue, or fasteners.
Unlike other bin boxes, wire bin boxes are easy to clean and don't collect dust.
Stack bin boxes up to four high without removing the casters.
Six compartments in one bin box let you keep items organized.
A conductive coating protects sensitive contents from electrostatic discharge.
These bins ship flat so you can keep plenty of extras on hand. They easily assemble without tape, glue, or fasteners.
Turn your pail into a versatile toolbox.
Organize small parts and hand tools with these racks, which attach to steel walls, cabinets, and other magnetic surfaces.
Keep small tools and parts in these trays for easy access.
Use these bins to hold small parts.
Keep tools and small parts in place and protected from damage.
Remove individual boxes to take the parts you need without moving the entire storage unit.
Plastic cabinets and boxes won't dent, chip, or rust.
Carry multiple compartmented boxes at once using the built-in handle.
Create your own storage system by choosing a frame and adding boxes, which come in a variety of compartment configurations.
These cabinets won't dent, chip, or rust.
Protect your sensitive components from electrostatic damage.
Cabinets are stackable with others of the same width and depth.
Turn a tight space into an efficient storage center with these shallow-depth cabinets.
Keep an eye on inventory without opening the doors.
These cabinets have open shelves for storing larger supplies and equipment.
These cabinets have the thickest steel construction that we offer and come with removable bin boxes that hang from panels.
Bins can be stacked on a surface, wall mounted, or attached to a rack.
Racks can be used individually or stacked up to nine high.
Pull out the bin boxes for easy access to contents.
Roll these bins near benches or other work areas, and turn each storage level to access the items you need.
Store multiple tools and parts in these bins, which spin so you can easily access the item you need.
Bins slope slightly and have a lip to keep contents in place.
Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts.
Avoid trips up and down step ladders to get tools and supplies—mount these trays to top steps that are 13 1/2" to 14" wide and 6" to 6 1/2" deep to keep items securely within reach.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.