About Torque Tools
More
Screwdriver-Style Socket Handles
Turn sockets from above when there's not room to swing a standard wrench handle.
Ultra-Grip Screwdriver-Style Socket Handles
A soft, contoured grip gives you a secure, comfortable hold. Use these handles to tighten and loosen sockets from above when there isn’t room to swing a standard wrench.
| Overall Lg. | Material | Grip Material | Each | |
1/4" Square Drive | ||||
|---|---|---|---|---|
| 6 1/2" | Chrome-Plated Steel | Rubber | 00000000 | 00000 |
Folding Screwdriver-Style Socket Handles
For more leverage to tighten or loosen fasteners compared to standard screwdriver-style socket handles, you can fold these handles 90 degrees. Flip the handle up straight to tackle fasteners in tight spaces.
T-Style Wrench Handles
Grip one side of the handle in each hand and twist to free stubborn fasteners. These wrench handles have a long shaft, so you can access hard-to-reach spots without a socket extension. They’re also known as breaker bars.
Changeable-Shaft Factory-Set Torque Screwdrivers
Choose a handle based on torque and change shafts to use a different size or drive style. Handles are factory set to ensure you reach the same torque every time. They signal with an audible click when the set torque is reached. The torque setting cannot be adjusted. Handles have a contoured ulta grip for comfort. They come with a calibration certificate that is traceable to DIN and includes the test measurements that confirm accuracy.
| Torque Setting | Clockwise Accuracy | Torque-Limiting Direction | Certification | Overall Lg. with Shaft | Handle Material | Grip Style | Each | |
| 5 in.-lbs. 0.4 ft.-lbs. 0.6 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | 0000000 | 000000 |
| 7.5 in.-lbs. 0.6 ft.-lbs. 0.8 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | 0000000 | 00000 |
| 10 in.-lbs. 0.8 ft.-lbs. 1.1 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | 0000000 | 000000 |
| 15 in.-lbs. 1.3 ft.-lbs. 1.7 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | 0000000 | 000000 |
| 20 in.-lbs. 1.7 ft.-lbs. 2.3 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | 0000000 | 000000 |
| 25 in.-lbs. 2.1 ft.-lbs. 2.8 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 1/2" | Plastic | Ultra Grip | 0000000 | 000000 |
| 30 in.-lbs. 2.5 ft.-lbs. 3.4 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 1/2" | Plastic | Ultra Grip | 0000000 | 000000 |
| Drive Size | Shaft Material | Each | |
Phillips  | |||
|---|---|---|---|
| No. 000 | Chrome-Plated Steel | 00000000 | 00000 |
| No. 00 | Chrome-Plated Steel | 00000000 | 0000 |
| No. 0 | Chrome-Plated Steel | 00000000 | 0000 |
| No. 1 | Chrome-Plated Steel | 00000000 | 0000 |
Slotted | |||
| 5/64" | Chrome-Plated Steel | 00000000 | 0000 |
| 3/32" | Chrome-Plated Steel | 00000000 | 0000 |
| 1/8" | Chrome-Plated Steel | 00000000 | 0000 |
| 9/64" | Chrome-Plated Steel | 00000000 | 0000 |
| 5/32" | Chrome-Plated Steel | 00000000 | 0000 |
Torx | |||
| T5 | Chrome-Plated Steel | 00000000 | 0000 |
| T6 | Chrome-Plated Steel | 00000000 | 0000 |
| T7 | Chrome-Plated Steel | 00000000 | 0000 |
| T8 | Chrome-Plated Steel | 00000000 | 0000 |
| T9 | Chrome-Plated Steel | 00000000 | 0000 |
| T10 | Chrome-Plated Steel | 00000000 | 0000 |
| T15 | Chrome-Plated Steel | 00000000 | 0000 |
| T20 | Chrome-Plated Steel | 00000000 | 0000 |
| T25 | Chrome-Plated Steel | 00000000 | 0000 |
| For Bit Hex Shank Size | Shaft Material | Each | |
| 1/4" | Chrome-Plated Steel | 0000000 | 000000 |
| Square Drive Size | Shaft Material | Each | |
| 1/4" | Chrome-Plated Steel | 0000000 | 000000 |
Changeable-Shaft Torque Screwdrivers
Choose a handle based on torque and a shaft with the size you need. To adjust torque, insert the adjustment tool into the handle and turn to the desired setting. When set torque is reached, the driver signals with an audible click.
Handles have a contoured ultra grip for comfort. They come with a calibration certificate that is traceable to DIN and includes the test measurements that confirm accuracy.
Note: Accuracy ratings apply to the entire torque range.
| Torque Range | Graduations | Clockwise Accuracy | Torque-Limiting Direction | Certification | Overall Lg. with Shaft | Handle Material | Grip Style | Includes | Each | |
Click Torque Limiter | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
in.-oz. | ||||||||||
| 15-80 in.-oz. | 2.5 in.-oz. | ±10% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | 4 mm Bit Adapter Torque Adjustment Tool | 0000000 | 0000000 |
in.-lbs. | ||||||||||
| 5-10 in.-lbs. | 0.2 in.-lbs. | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | 4 mm Bit Adapter Torque Adjustment Tool | 0000000 | 000000 |
| 10-50 in.-lbs. | 2.0 in.-lbs. | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 1/2" | Plastic | Ultra Grip | 4 mm Bit Adapter Torque Adjustment Tool | 0000000 | 000000 |
| 18-62 in.-lbs. | 2.0 in.-lbs. | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 1/2" | Plastic | Ultra Grip | 4 mm Bit Adapter Torque Adjustment Tool | 0000000 | 000000 |
Nm | ||||||||||
| 0.1-0.6 Nm | .05 Nm | ±10% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 3/8" | Plastic | Ultra Grip | Torque Adjustment Tool | 0000000 | 000000 |
| 0.8-5 Nm | .20 Nm | ±6% | Clockwise | Calibration Certificate with Test Data Traceable to DIN | 7 1/2" | Plastic | Ultra Grip | Torque Adjustment Tool | 0000000 | 000000 |
| Size | Shaft Material | Each | |
Phillips | |||
|---|---|---|---|
| No. 000 | Chrome-Plated Steel | 00000000 | 00000 |
| No. 00 | Chrome-Plated Steel | 00000000 | 0000 |
| No. 0 | Chrome-Plated Steel | 00000000 | 0000 |
| No. 1 | Chrome-Plated Steel | 00000000 | 0000 |
Slotted | |||
| 5/64" | Chrome-Plated Steel | 00000000 | 0000 |
| 3/32" | Chrome-Plated Steel | 00000000 | 0000 |
| 1/8" | Chrome-Plated Steel | 00000000 | 0000 |
| 9/64" | Chrome-Plated Steel | 00000000 | 0000 |
| 5/32" | Chrome-Plated Steel | 00000000 | 0000 |
Torx | |||
| T5 | Chrome-Plated Steel | 00000000 | 0000 |
| T6 | Chrome-Plated Steel | 00000000 | 0000 |
| T7 | Chrome-Plated Steel | 00000000 | 0000 |
| T8 | Chrome-Plated Steel | 00000000 | 0000 |
| T9 | Chrome-Plated Steel | 00000000 | 0000 |
| T10 | Chrome-Plated Steel | 00000000 | 0000 |
| T15 | Chrome-Plated Steel | 00000000 | 0000 |
| T20 | Chrome-Plated Steel | 00000000 | 0000 |
| T25 | Chrome-Plated Steel | 00000000 | 0000 |
| For Bit Hex Shank Size | Shaft Material | Each | |
| 1/4" | Chrome-Plated Steel | 0000000 | 000000 |
| Square Drive Size | Shaft Material | Each | |
| 1/4" | Chrome-Plated Steel | 0000000 | 000000 |