McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    9 Products

    Reversible-Bit Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdriver/Nutdrivers. Reversible-Bit Screwdriver/Nutdrivers, Plain Grip, 10 Sizes.
    Image of Product. Front orientation. Screwdriver/Nutdrivers. Reversible-Bit Screwdriver/Nutdrivers, Ultra Grip, 6 Sizes.

    Plain Grip

    10 Sizes

    Ultra Grip

    6 Sizes

    Image of Product. Front orientation. Screwdriver/Nutdrivers. Reversible-Bit Screwdriver/Nutdrivers, Ultra Grip, 10 Sizes.
    Image of Product. Front orientation. Screwdriver/Nutdrivers. Reversible-Bit Screwdriver/Nutdrivers, Cushion Grip, 11 Sizes.

    Ultra Grip

    10 Sizes

    Cushion Grip

    11 Sizes

    Image of Specification. External Hex. Front orientation. Contains Annotated. For External Hex Drives.

    External

    Hex

    Image of Specification. Phillips. Front orientation. For Phillips Drives.

    Phillips

    Image of Specification. Slotted. Front orientation. For Slotted Drives.

    Slotted

    Image of Specification. Square. Front orientation. For Square Drives.

    Square

    Image of Specification. Torx. Front orientation. For Torx Drives.

    Torx

    Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.
    Ultra Grip—Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque.
    Cushion Grip—Cushion-grip drivers offer comfort and some slip resistance. Bits turn eight screw sizes and the shaft three external hex sizes.
    6 Sizes—For those with six sizes, bits turn four screw sizes and the shaft two external hex sizes.
    Voltage Detector—Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft two external hex sizes.
    Shaft
    Material
    For Bit Hex
    Shank Size
    No. of
    Sizes
    Sizes Included
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Bit-Holding
    Mechanism
    Shaft
    Bit
    Handle
    Certification
    Features
    For Drive Style
    Each
    Cushion Grip
    1/4", 5/16"11External Hex: 1/4"
    External Hex: 5/16", 3/8"
    Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Square: No. 1, No. 2
    Torx: T10, T15    		7"2 1/2"17/32"Ball DetentChrome-Plated SteelSteelPlastic—Bit storage inside shaftExternal Hex, Phillips, Slotted, Square, Torx
    		0000000000000
     
    Plain Grip
    1/4", 5/16"10External Hex: 1/4", 5/16"
    Phillips: No. 1, No. 2, No. 3
    Slotted: 3/16", 1/4", 9/32"
    Torx: T15, T20    		7 1/4"3 1/2"3/8"Ball DetentChrome-Plated SteelSteelPlastic—Bit storage inside shaftExternal Hex, Phillips, Slotted, Torx
    		000000000000
     
    Ultra Grip
    1/4", 5/16"6External Hex: 1/4", 5/16"
    Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"    		7 3/4"2 1/4"7/16"Ball DetentChrome-Plated SteelSteelPlastic—Bit storage inside shaftExternal Hex, Phillips, Slotted
    		00000000000
    1/4", 5/16"10External Hex: 1/4", 5/16"
    Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Square: No. 1, No. 2
    Torx: T10, T15    		9"3 3/8"1 1/4"Ball DetentPlastic-Coated SteelSteelPlasticC-UL Listed, UL Listed
    		Bit storage inside shaft, Bit storage inside tool, Voltage DetectorExternal Hex, Phillips, Slotted, Square, Torx
    		000000000000
     

    Stubby Reversible-Bit Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdriver/Nutdrivers. Stubby Reversible-Bit Screwdriver/Nutdrivers.
    Image of Specification. External Hex. Front orientation. Contains Annotated. For External Hex Drives.
    Image of Specification. Phillips. Front orientation. For Phillips Drives.

    External

    Hex

    Phillips

    Image of Specification. Slotted. Front orientation. For Slotted Drives.

    Slotted

    When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible and turns two external hex sizes. Drivers have a cushion grip for comfort and some slip resistance.
    Shaft
    Material
    For Bit Hex
    Shank Size
    No. of
    Sizes
    Sizes Included
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Bit-Holding
    Mechanism
    Shaft
    Bit
    Handle
    Features
    For Drive Style
    Each
    Cushion Grip
    1/4", 5/16"6Phillips: No. 1, No. 2
    Slotted: 1/4", 3/16"
    External Hex: 1/4", 5/16"    		3 3/8"1 1/4"17/32"Ball DetentChrome-Plated SteelSteelPlasticBit storage inside shaftExternal Hex, Phillips, Slotted
    		0000000000000
     

    Precise-Control Screwdriver/Nutdriver Sets

    Image of Product. Front orientation. Screwdriver/Nutdrivers. Precise-Control Screwdriver/Nutdriver Sets.
    The screwdrivers and nutdrivers have a rotating end cap on the handle that lets you apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips. Also known as jewelers’ screwdrivers. These sets also include a variety of other tools.
    No. of
    Pieces
    Includes
    Container
    Type
    Each
    28Six Slotted Screwdrivers (0.025", 0.040", 0.055", 0.070", 0.080", 0.100")
    Two Phillips Screwdrivers (No. 0 and No. 1)
    Five Nutdrivers (5/64", 3/32", 7/64", 1/8", and 5/32")
    Six Hex Screwdrivers (0.028", 0.035", 0.050", 1/16", 5/64", and 3/32")
    Eight Open-End Wrenches (5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 1/4", and 5/16")
    3" Long Extension    		Plastic Pouch00000000000000

    Changeable-Shaft Precise-Control Screwdriver/Nutdriver Sets

    Image of Product. Front orientation. Screwdriver/Nutdrivers. Changeable-Shaft Precise-Control Screwdriver/Nutdriver Sets, 28 Pieces.
    Image of Product. Front orientation. Screwdriver/Nutdrivers. Changeable-Shaft Precise-Control Screwdriver/Nutdriver Sets, 31 Pieces.

    28 Pieces

    31 Pieces

    Slide a different shaft into a handle to change tip size or drive style. These tools have a rotating end cap on the handle that lets you apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips.
    No. of
    Pieces
    Includes
    Container
    Type
    Each
    28Six Hex Screwdriver Shafts (0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2.0 mm, 2.5 mm)
    Six Slotted Screwdriver Shafts (0.025", 0.040", 0.055", 0.070", 0.080", and 0.100")
    Five Nutdriver Shafts (2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm, and 4.0 mm)
    Eight Open-End Wrench Shafts (2.5 mm, 3.0 mm, 3.2 mm, 4.0 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 7.0 mm)
    One Steel Handle
    Two Phillips Screwdriver Shafts (No. 000 and No. 00)    		Plastic Pouch0000000000000
    31Two Steel Handles
    Plastic Static-Control Handle
    Four Slotted Screwdriver Shafts (0.055", 0.070", 0.080", and 0.100")
    Three Phillips Screwdriver Shafts (No. 00, No. 0, and No. 1)
    Three Nutdriver Shafts (7/64", 1/8", and 5/32")
    Six Hex Screwdriver Shafts (0.028", 0.035", 0.050", 1/16", 5/64", and 3/32")
    Four Torx Screwdriver Shafts (T5, T6, T7, and T9)
    Two Tamper-Resistant Torx Shafts (T8 and T10)
    Four Open-End Wrench Shafts (7/64", 1/8", 5/32", and 3/16")
    3/32" Diameter Awl Shaft
    3" Long Extension    		Plastic Pouch000000000000

    Changeable-Shaft Screwdriver/Nutdriver Sets

    Image of Product. Front orientation. Screwdriver/Nutdrivers. Changeable-Shaft Screwdriver/Nutdriver Sets.
    You only need one tool—slide a different shaft into the handle to change tip size or drive style.
    No. of
    Pieces
    Includes
    Container Type
    Each
    14Handle
    Two Slotted Screwdriver Shafts (3/16" and 1/4")
    Two Phillips Screwdriver Shafts (No. 1 and No. 2)
    Nine Nutdriver Shafts (3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2")    		Canvas Roll-Up Pouch0000000000000
    back to top