McMaster-Carr logo
    Filter by
    System of Measurement
    Driver Style
    Grip Style
    Number of Pieces
    Handle Material
    Power Source
    For Bit Shank Type
    Shank Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    77 Products

    Static-Control Precise-Control Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Static-Control Precise-Control Screwdriver Sets.
    Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    No. of
    Pieces
    Includes
    Grip
    Style
    Material
    Static Control
    Rating
    Surface Resistivity
    Specs. Met
    Container Type
    Each
    Hex
    70.7 mm Hex Screwdriver—4 23/32" O'all Lg.
    0.9 mm Hex Screwdriver—4 23/32" O'all Lg.
    1.3 mm Hex Screwdriver—4 23/32" O'all Lg.
    1.5 mm Hex Screwdriver—5 23/32" O'all Lg.
    2 mm Hex Screwdriver—5 23/32" O'all Lg.
    2.5 mm Hex Screwdriver—6 11/16" O'all Lg.
    3 mm Hex Screwdriver—6 11/16" O'all Lg.    		PlainChrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-1Plastic Roll-Up Pouch7440A93000000
     
    Torx
    7T4 Torx Screwdriver—4 23/32" O'all Lg.
    T5 Torx Screwdriver—4 23/32" O'all Lg.
    T6 Torx Screwdriver—4 23/32" O'all Lg.
    T7 Torx Screwdriver—4 23/32" O'all Lg.
    T8 Torx Screwdriver—4 23/32" O'all Lg.
    T9 Torx Screwdriver—5 23/32" O'all Lg.
    T10 Torx Screwdriver—5 23/32" O'all Lg.    		PlainChrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-1—7440A7100000
     
    Phillips and Slotted
    70.059" Slotted Screwdriver—4 23/32" O'all Lg.
    0.079" Slotted Screwdriver—4 23/32" O'all Lg.
    0.098" Slotted Screwdriver—5 23/32" O'all Lg.
    0.138" Slotted Screwdriver—6 11/16" O'all Lg.
    No. 00 Phillips Screwdriver—4 23/32" O'all Lg.
    No. 0 Phillips Screwdriver—5 23/32" O'all Lg.
    No. 1 Phillips Screwdriver—6 11/16" O'all Lg.    		PlainChrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-1—7440A4100000
    70.079" Slotted Screwdriver—10 1/4" O'all Lg.
    0.098" Slotted Screwdriver—9 21/32" O'all Lg.
    0.118" Slotted Screwdriver—10 1/4" O'all Lg.
    0.138" Slotted Screwdriver—10 1/4" O'all Lg.
    0.157" Slotted Screwdriver—10 1/4" O'all Lg.
    No. 0 Phillips Screwdriver—9 21/32" O'all Lg.
    No. 1 Phillips Screwdriver—10 1/4" O'all Lg.    		PlainChrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-1—7440A7300000
     
    Phillips, Slotted, Hex, and Torx
    505 3/4" Lg. Chip Lifter
    Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8"
    Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm
    Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4"
    Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1
    Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157"
    Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20    		PlainChrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-1Metal Stand7440A95000000
     

    Static-Control Precise-Control Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Static-Control Precise-Control Screwdrivers.
    Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, they drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    Antistatic—Reduce static buildup, but won't drain charges as quickly or efficiently as static-dissipative screwdrivers. They are best for common electrical appliances that aren't ultra sensitive.
    Static Dissipative—Drain static charges faster than antistatic screwdrivers. They meet IEC requirements for preventing the buildup of electrostatic discharge.
    Shaft
    Drive
    Size
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Grip
    Style
    Static Control
    Rating
    Surface Resistivity
    Specs. Met
    Each
    Phillips
     
    Chrome-Plated Steel
    No. 0005 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A72000000
    No. 005 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A210000
    No. 05 11/16"2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A220000
    No. 16 5/16"2 3/8"5/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A230000
     
    Slotted
     
    Black-Oxide Steel
    0.025"4 15/16"1 1/4"3/32"PlainAntistatic1× 10^9 ohm/sq. to 1× 10^11 ohm/sq.—7440A270000
    0.040"4 15/16"1 1/4"3/32"PlainAntistatic1× 10^9 ohm/sq. to 1× 10^11 ohm/sq.—7440A280000
    0.055"4 15/16"1 1/4"3/32"PlainAntistatic1× 10^9 ohm/sq. to 1× 10^11 ohm/sq.—7440A290000
     
    Chrome-Plated Steel
    0.059"5 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A110000
    0.079"5 1/2"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A120000
    0.098"5 11/16"2"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A130000
    0.118"5 11/16"2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A140000
    0.138"6 5/16"2 3/8"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A150000
    0.157"6 5/16"2 3/8"5/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A160000
     
    Hex
     
    Chrome-Plated Steel
    0.028"5 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A7400000
    0.035"5 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A7500000
    0.050"5 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A760000
    1/16"5 11/16"2"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A770000
    5/64"5 11/16"2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A780000
    3/32"6 5/16"2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A790000
    7/64"6 5/16"2 1/2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A810000
    1/8"6 5/16"2 1/2"5/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A820000
    1.5 mm5 9/16"2"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A870000
    2.5 mm6 5/16"2 1/2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A890000
    3 mm6 5/16"2 1/2"5/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A910000
     
    Torx
     
    Chrome-Plated Steel
    T15 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5100000
    T25 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5200000
    T35 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5300000
    T45 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5400000
    T55 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5500000
    T65 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5600000
    T75 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5700000
    T85 5/16"1 5/8"3/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5800000
    T95 11/16"2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A5900000
    T105 11/16"2"1/8"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A6100000
    T156 11/16"2 3/8"5/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A6200000
    T206 11/16"2 3/8"5/32"PlainStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-17440A6300000
     

    Static-Control Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Static-Control Screwdriver Sets.
    Fasten screws of various sizes on circuit boards and other sensitive electronics, while preventing harmful static shocks. Also known as ESD-safe screwdrivers, these tools meet IEC requirements to drain static away from your workpiece before it causes damage.
    The handles on these drivers are made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. They're also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without slippage, which would wear on screw heads and the driver's tip.
    No. of
    Pieces
    Includes
    Material
    Static Control
    Rating
    Surface Resistivity
    Mfr.
    Specs. Met
    Each
    Torx
     
    Premium
    6T6 Torx Screwdriver—6 1/2" O'all Lg.
    T8 Torx Screwdriver—6 1/2" O'all Lg.
    T9 Torx Screwdriver—6 3/4" O'all Lg.
    T10 Torx Screwdriver—7 1/2" O'all Lg.
    T15 Torx Screwdriver—7 1/2" O'all Lg.
    T20 Torx Screwdriver—8 1/4" O'all Lg.    		Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A52000000
     
    Phillips and Slotted
     
    Premium
    61/8" Slotted Screwdriver—8" O'all Lg.
    5/32" Slotted Screwdriver—8 1/4" O'all Lg.
    7/32" Slotted Screwdriver—9 1/4" O'all Lg.
    No. 0 Phillips Screwdriver—6 1/2" O'all Lg.
    No. 1 Phillips Screwdriver—7 1/2" O'all Lg.
    No. 2 Phillips Screwdriver—8 1/2" O'all Lg.    		Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A5100000
     

    Static-Control Bit Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Static-Control Bit Screwdrivers.
    Fasten a variety of screws on circuit boards and other sensitive electronics, while preventing harmful static shocks. Also known as ESD-safe screwdrivers, these drain static away from your workpiece before it causes damage. Insert a bit (not included) into the chuck to drive multiple screw styles and sizes with a single tool.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Shaft Overall
    Wd.
    Bit-Holding
    Mechanism
    Grip
    Style
    Static Control
    Rating
    Surface Resistivity
    Each
    1/4"4 11/16"Chrome-Plated Steel3/8"Quick-Change ChuckUltra GripStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm2787N11000000

    Static-Control Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Static-Control Screwdrivers.
    Protect circuit boards and other sensitive electronics from harmful static shocks. Also known as ESD-safe screwdrivers, they meet IEC requirements to drain static away from your workpiece before it causes damage.
    The handle on these drivers is made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. The contoured grip maximizes comfort and minimizes hand strain, fatigue, and blisters, even with extended use.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without slippage, which would wear on screw heads and the driver's tip.
    Standard Length—The most common screwdriver length for a specific drive size.
    Shaft
    Drive
    Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Static Control
    Rating
    Surface Resistivity
    Mfr.
    Specs. Met
    Each
    Phillips
     
    Premium
    No. 0Standard6 1/2"2 7/16"1/8"Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A2100000
    No. 1Standard7 1/2"3 1/8"3/16"Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A220000
    No. 2Standard8 1/2"4"1/4"Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A4400000
     
    Slotted
     
    Premium
    1/8"Standard8"3 15/16"1/8"Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A110000
    5/32"Standard8 1/4"3 15/16"5/32"Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A120000
    7/32"Standard9 1/4"5"7/32"Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A3400000
    1/4"Standard10 1/2"6"1/4"Chrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmWihaIEC 61340-5-154445A3600000
     

    Static-Control Torque Screwdrivers

    Also known as ESD-safe screwdrivers, the grip drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Turn the collar to adjust torque. When set torque is reached, these drivers slip to disengage and stop turning the fastener, preventing overtightening. They come with a calibration certificate that is traceable to NIST and states the product has passed a test for accuracy. Drivers have a contoured ultra-grip handle that provides comfort and the best possible grip for achieving maximum torque. The torque adjustment mechanism locks to prevent accidental changes to your setting. Use with screwdriver bits (not included).
    Note: Accuracy ratings do not apply to the lower 20% of the torque range.
    Slip-Release Torque Limiter—in·ozf
    Image of Product. Driver. Front orientation. Driver. Static-Control Torque Screwdrivers.
    Image of Attribute. Front orientation. Static-Control Torque Screwdrivers.

    Driver

    Material
    Torque Range,
    in·ozf
    Graduations,
    in·ozf
    Max. Torque,
    in·ozf
    For Bit Hex
    Shank Size
    Clockwise
    Accuracy
    Torque-Limiting
    Direction
    Certificate Type
    Overall
    Lg.
    Shaft
    Handle
    Grip
    Style
    Driver
    Style
    Surface Resistivity
    Features
    Each
    20 to 16011601/4"±6%ClockwiseCalibration Certificate Traceable to NIST7 1/4"Stainless SteelAluminum
    		Ultra GripDriver1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmLocking Torque Adjustment Mechanism
    Static Control Grip    		5871A510000000
     
    Slip-Release Torque Limiter—in·lbf
    Image of Product. Driver. Front orientation. Driver. Static-Control Torque Screwdrivers.
    Image of Product. T-Handle Driver. Front orientation. T-Handle. Static-Control Torque Screwdrivers.
    Image of Attribute. Front orientation. Static-Control Torque Screwdrivers.

    Driver

    T-Handle Driver

    T-Handle—T-handle drivers include a removable T-bar for extra leverage when apply high torque.
    Material
    Torque Range,
    in·lbf
    Graduations,
    in·lbf
    Max. Torque,
    in·lbf
    For Bit Hex
    Shank Size
    Clockwise
    Accuracy
    Torque-Limiting
    Direction
    Certificate Type
    Overall
    Lg.
    Shaft
    Handle
    Grip
    Style
    Driver
    Style
    Surface Resistivity
    Features
    Each
    2 to 120.1121/4"±6%ClockwiseCalibration Certificate Traceable to NIST7 1/4"Stainless SteelAluminum
    		Ultra GripDriver1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmLocking Torque Adjustment Mechanism
    Static Control Grip    		5871A520000000
    10 to 501501/4"±6%ClockwiseCalibration Certificate Traceable to NIST7 3/4"Stainless SteelAluminum
    		Ultra GripT-Handle1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmLocking Torque Adjustment Mechanism
    Removable T-Handle
    Static Control Grip    		5871A63000000
    30 to 801801/4"±6%ClockwiseCalibration Certificate Traceable to NIST7 3/4"Stainless SteelAluminum
    		Ultra GripT-Handle1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmLocking Torque Adjustment Mechanism
    Removable T-Handle
    Static Control Grip    		5871A64000000
     
    Slip-Release Torque Limiter—N-cm
    Image of Product. Driver. Front orientation. Driver. Static-Control Torque Screwdrivers.
    Image of Attribute. Front orientation. Static-Control Torque Screwdrivers.

    Driver

    Material
    Torque Range,
    N-cm
    Graduations,
    N-cm
    Max. Torque,
    N-cm
    For Bit Hex
    Shank Size
    Clockwise
    Accuracy
    Torque-Limiting
    Direction
    Certificate Type
    Overall
    Lg.
    Shaft
    Handle
    Grip
    Style
    Driver
    Style
    Surface Resistivity
    Features
    Each
    20 to 12011201/4"±6%ClockwiseCalibration Certificate Traceable to NIST7 1/4"Stainless SteelAluminum
    		Ultra GripDriver1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmLocking Torque Adjustment Mechanism
    Static Control Grip    		5871A550000000
     
    Slip-Release Torque Limiter—N-m
    Image of Product. T-Handle Driver. Front orientation. T-Handle. Static-Control Torque Screwdrivers.
    Image of Attribute. Front orientation. Static-Control Torque Screwdrivers.

    T-Handle Driver

    T-Handle—T-handle drivers include a removable T-bar for extra leverage when apply high torque.
    Material
    Torque
    Range, N-m
    Graduations,
    N-m
    Max. Torque,
    N-m
    For Bit Hex
    Shank Size
    Clockwise
    Accuracy
    Torque-Limiting
    Direction
    Certificate Type
    Overall
    Lg.
    Shaft
    Handle
    Grip
    Style
    Driver
    Style
    Surface Resistivity
    Features
    Each
    1 to 60.161/4"±6%ClockwiseCalibration Certificate Traceable to NIST7 3/4"Stainless SteelAluminum
    		Ultra GripT-Handle1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmLocking Torque Adjustment Mechanism
    Removable T-Handle
    Static Control Grip    		5871A660000000
    4 to 90.191/4"±6%ClockwiseCalibration Certificate Traceable to NIST7 3/4"Stainless SteelAluminum
    		Ultra GripT-Handle1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmLocking Torque Adjustment Mechanism
    Removable T-Handle
    Static Control Grip    		5871A67000000
     

    Static-Control Precise-Control Nutdrivers

    Image of Product. Front orientation. Nutdrivers. Static-Control Precise-Control Nutdrivers.
    Image of Attribute. Front orientation.

    Protect delicate electronics from harmful static shocks. Also known as ESD-safe nutdrivers, these drain static away from your workpiece before it causes damage. Press the end of the handle with your palm to apply pressure while turning the nutdriver with your fingertips.
    Warning: Because the handle conducts electricity, nutdrivers must not come in contact with sources of electrical power.
    Black-Oxide Steel—These nutdrivers withstand occasional moisture.
    Plain Grip—Made of hard plastic for durability.
    Shaft
    Drive
    Size
    Bolt
    Clearance
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Grip
    Style
    Static Control
    Rating
    Surface Resistivity,
    ohm/sq.
    Each
    5/64"1/4"6 1/4"2 1/2"5/32"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A3100000
    3/32"1/4"6 1/4"2 1/2"5/32"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A420000
    7/64"1/4"6 1/4"2 1/2"3/16"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A430000
    1/8"1/2"6 1/4"2 1/2"3/16"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A440000
    5/32"1/2"6 1/4"2 1/2"1/4"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A4500000
    3/16"1/2"6 1/4"2 1/2"9/32"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A4600000
    7/32"1/2"6 1/4"2 1/2"5/16"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A4700000
    1/4"1/2"6 1/4"2 1/2"3/8"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^117278A4800000
    2 mm1/4"6 1/4"2 1/2"5/32"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A310000
    2.2 mm1/4"6 1/4"2 1/2"5/32"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A320000
    2.5 mm1/4"6 1/4"2 1/2"5/32"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A330000
    3 mm1/2"6 1/4"2 1/2"3/16"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A3400000
    4 mm1/2"6 1/4"2 1/2"1/4"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A3600000
    4.5 mm1/2"6 1/4"2 1/2"9/32"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A3700000
    5 mm1/2"6 1/4"2 1/2"5/16"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A3800000
    5.5 mm1/2"6 1/4"2 1/2"5/16"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A3900000
    6 mm1/2"6 1/4"2 1/2"3/8"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^1152965A4100000

    Static-Control Precise-Control Nutdriver Sets

    Image of Product. Front orientation. Nutdrivers. Static-Control Precise-Control Nutdriver Sets.
    Image of Attribute. Front orientation.

    Keep a collection of small nutdrivers on hand to protect delicate electronics from static shocks. Also known as ESD-safe nutdrivers, these drain static away from your workpiece before it causes damage. Press the end of the handle with your palm to apply pressure while turning the nutdriver with your fingertips.
    Warning: Because the handle conducts electricity, nutdrivers must not come in contact with sources of electrical power.
    Black-Oxide Steel—These nutdrivers withstand occasional moisture.
    Plain Grip—Made of hard plastic for durability.
    No. of
    Pieces
    Includes
    Bolt
    Clearance
    Material
    Grip
    Style
    Static Control
    Rating
    Surface Resistivity,
    ohm/sq.
    Container
    Type
    Each
    81/4" Nutdriver—6 1/4" O'all Lg.
    1/8" Nutdriver—6 1/4" O'all Lg.
    3/16" Nutdriver—6 1/4" O'all Lg.
    3/32" Nutdriver—6 1/4" O'all Lg.
    5/32" Nutdriver—6 1/4" O'all Lg.
    5/64" Nutdriver—6 1/4" O'all Lg.
    7/32" Nutdriver—6 1/4" O'all Lg.
    7/64" Nutdriver—6 1/4" O'all Lg.    		1/4" to 1/2"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^11Plastic Pouch7278A58000000
    82 mm Nutdriver—6 1/4" O'all Lg.
    2.2 mm Nutdriver—6 1/4" O'all Lg.
    2.5 mm Nutdriver—6 1/4" O'all Lg.
    3 mm Nutdriver—6 1/4" O'all Lg.
    3.5 mm Nutdriver—6 1/4" O'all Lg.
    4 mm Nutdriver—6 1/4" O'all Lg.
    4.5 mm Nutdriver—6 1/4" O'all Lg.
    5 mm Nutdriver—6 1/4" O'all Lg.    		1/4" to 1/2"Black-Oxide SteelPlainAntistatic1× 10^9 to 1× 10^11Plastic Pouch52965A2800000
    back to top